Explore the vast range of titles available.

Prospero homeobox 1 (PROX1) is a member of the homeobox transcription factor family that plays a critical role in the development of multiple tissues and specification of cell fate. PROX1 expression is differentially regulated based on the cellular context and plays an antagonistic role as a tumour promoter or suppressor in different tumour types. In human breast cancer, PROX1 expression is suppress­ed; however, the molecular mechanism by which it is down-regulated remains poorly understood. Here, we show that ectopic expression of PROX1 reduces the motility and invasiveness of MDA-MB-231 human breast cancer cells, suggesting that PROX1 functions as a negative regulator of tumour invasion in MDA-MB-231 cells. Treatment with histone deacetylase (HDAC) inhibitors up-regulates PROX1 mRNA and protein expression levels. Knockdown of HDAC1 using short hairpin RNA also up-regulates PROX1 mRNA and protein expression levels. We found that HDAC1 interacted with c-JUN at the activator protein (AP)-1-binding site located at –734 to –710 in the PROX1 promoter region to suppress PROX1 expression. In addition, c-JUN N-terminal kinase-mediated c-JUN phosphorylation was found to be crucial for silencing PROX1 expression. In conclusion, PROX1 expression can be silenced by the epigenetic mechanism involved in the complex formation of HDAC1 and c-JUN at the AP-1 site in the PROX1 promoter region in MDA-MB-231 human breast cancer cells. Therefore, this study revealed the epigenetic regulatory mechanism involved in the suppression of PROX1 expression in breast cancer cells.

Breast cancer is a common malignancy among women worldwide. Gelatinases such as matrix metallopeptidase 2 (MMP2) and MMP9 play crucial roles in cancer cell migration, invasion, and metastasis. To develop a novel platform compound, we synthesized a flavonoid derivative, (E)-5-((4-oxo-4H-chromen-3-yl)methyleneamino)-1-phenyl-1H-pyrazole-4-carbonitrile (named DK4023) and characterized its inhibitory effects on the motility and MMP2 and MMP9 expression of highly metastatic MDA-MB-231 breast cancer cells. We found that DK4023 inhibited tumor necrosis factor alpha (TNFα)-induced motility and F-actin formation of MDA-MB-231 cells. DK4023 also suppressed the TNFα-induced mRNA expression of MMP9 through the downregulation of the TNFα-extracellular signal-regulated kinase (ERK)/early growth response 1 (EGR-1) signaling axis. These results suggest that DK4023 could serve as a potential platform compound for the development of novel chemopreventive/chemotherapeutic agents against invasive breast cancer.

Skew-symmetric functions are a class of functions defined on a product space \\(M \\times M\\) that are antisymmetric with respect to the order of their inputs. In [13], the authors proved that non-deterministic skew-symmetric Gaussian fields cannot be stationary or isotropic and proposed an alternative notion: stationarity (isotropy) in each component space. Our work focuses on local quadratic approximations of the associated Gaussian fields. Local quadratic approximations to random fields are random polynomials parametrized by a jointly sampled gradient vector and Hessian matrix. We characterize the distribution of the corresponding random vectors and random matrices. Then, we study the error in the quadratic approximation, which is also a Gaussian field. We investigate the error induced by the quadratic approximation in three senses: the pointwise error, the maximal error over an ellipsoidal region, and the worst-case error for multivariate Gaussian inputs at a given confidence level. Next, we explore the limiting behavior of the worst-case error as the distance between an expansion point and evaluation points approaches zero and infinity. Finally, we study how, as the input dimension increases, the variance of multivariate Gaussian distributions must be restricted to keep the worst-case error bound constant.

Pigs are important experimental animals for cardiovascular research. Few porcine coronary atherosclerosis models have been developed; however, their induction requires more than six months. We developed a porcine coronary artery atherosclerosis model using nicotine injection with a balloon overdilation. A coronary balloon was placed in the porcine coronary artery and overdilated to induce a mechanical injury. Nicotine was administrated via intramuscular injection every day, and changes in the coronary artery were observed after four weeks. Coronary angiography revealed nicotine injection with a balloon overdilation group showed narrowing of the coronary artery at the injury site. The combination of balloon and nicotine significantly increased the intimal hyperplasia in optical coherence tomography analysis. Proliferated tunica media were noted in the nicotine injection with balloon overdilation groups and lack of collagen was observed in the tunica media at eight weeks. Quantitative analysis showed increased smooth muscle actin alpha (SMA), cluster of differentiation 68 (CD68), and Krüppel-like factor 4 (KLF4) in the nicotine injection with balloon overdilation groups. Immunohistochemistry results showed CD68-positive cells displayed SMA- and KLF4-positive reactivity in the border zone of the intimal hyperplasia. Our results show that nicotine injection with balloon overdilation can induce atherosclerotic lesions within one month, which can serve as an alternative pig animal model for the development of coronary stents.

The recent progress in the development of measurement systems for autonomous recognition had a substantial impact on emerging technology in numerous fields, especially robotics and automotive applications. In particular, time-of-flight (TOF) based light detection and ranging (LiDAR) systems enable to map the surrounding environmental information over long distances and with high accuracy. The combination of advanced LiDAR with an artificial intelligence platform allows enhanced object recognition and classification, which however still suffers from limitations of inaccuracy and misidentification. Recently, multi-spectral LiDAR systems have been employed to increase the object recognition performance by additionally providing material information in the short-wave infrared (SWIR) range where the reflection spectrum characteristics are typically very sensitive to material properties. However, previous multi-spectral LiDAR systems utilized band-pass filters or complex dispersive optical systems and even required multiple photodetectors, adding complexity and cost. In this work, we propose a time-division-multiplexing (TDM) based multi-spectral LiDAR system for semantic object inference by the simultaneous acquisition of spatial and spectral information. By utilizing the TDM method, we enable the simultaneous acquisition of spatial and spectral information as well as a TOF based distance map with minimized optical loss using only a single photodetector. Our LiDAR system utilizes nanosecond pulses of five different wavelengths in the SWIR range to acquire sufficient material information in addition to 3D spatial information. To demonstrate the recognition performance, we map the multi-spectral image from a human hand, a mannequin hand, a fabric gloved hand, a nitrile gloved hand, and a printed human hand onto an RGB-color encoded image, which clearly visualizes spectral differences as RGB color depending on the material while having a similar shape. Additionally, the classification performance of the multi-spectral image is demonstrated with a convolution neural network (CNN) model using the full multi-spectral data set. Our work presents a compact novel spectroscopic LiDAR system, which provides increased recognition performance and thus a great potential to improve safety and reliability in autonomous driving.

Photodetectors are crucial for modern technologies such as optical communications, imaging, autonomous vehicles, and machine vision. However, conventional semiconductor-based photodetectors require additional filtering systems due to their broad spectral response, leading to increased costs and complexity. Here, we present a narrow spectral response photodetector using hexagonally arranged plasmonic Au nanohole structures, eliminating the need for optical filters. The device achieves a full-width at half maximum (FWHM) bandwidth of ∼40 nm with a response peak at 760 nm and a linear photocurrent responsivity of 0.95 μA/W. The photothermoelectric effect, induced by the nonradiative decay of plasmonic resonance, converts optical radiation into an electric potential on the Au surface. The hexagonal nanohole design generates polarization-independent photocurrents and allows spectral tuning beyond the cutoff region of silicon photodetectors. This versatile approach enables customizable response characteristics across a broad wavelength range through geometric design, enhancing its potential for diverse applications.

Background: Biodegradable poly (l-lactic acid) (PLLA), a bio safe polymer with a large elastic modulus, is widely used in biodegradable medical devices. However, because of its poor mechanical properties, a PLLA strut must be made twice as thick as a metal strut for adequate blood vessel support. Therefore, the mechanical properties of a drug-eluting metal-based stents (MBS) and a bioresorbable vascular scaffolds (BVS) were evaluated and their safety and efficacy were examined via a long-term rabbit iliac artery model. Methods: The surface morphologies of the MBSs and BVSs were investigated via optical and scanning electron microscopy. An everolimus-eluting (EE) BVS or an EE-MBS was implanted into rabbit iliac arteries at a 1.1:1 stent-to-artery ratio. Twelve months afterward, stented iliac arteries from each group were analyzed via X-ray angiography, optical coherence tomography (OCT), and histopathologic evaluation. Results: Surface morphology analysis of the EE coating on the MBS confirmed that it was uniform and very thin (4.7 μm). Comparison of the mechanical properties of the EE-MBS and EE-BVS showed that the latter outperformed the former in all aspects (radial force (2.75 vs. 0.162 N/mm), foreshortening (0.24% vs. 1.9%), flexibility (0.52 vs. 0.19 N), and recoil (3.2% vs. 6.3%). At all time points, the percent area restenosis was increased in the EE-BVS group compared to the EE-MBS group. The OCT and histopathological analyses indicate no significant changes in strut thickness. Conclusion: BVSs with thinner struts and shorter resorption times should be developed. A comparable long-term safety/efficacy evaluation after complete absorption of BVSs should be conducted.

Short-term outcomes regarding the safety and efficacy of a polymer-free everolimus-eluting stent (EES) with a nitrogen-doped titanium dioxide (N-TiO₂) film in a swine coronary model have been reported. However, the long-term results of the use of this type of stent have not yet been evaluated or compared to those of other polymer-free coronary stents. Therefore, this study aimed to determine the mid- to long-term safety and efficacy of a polymer-free EES with an N-TiO₂ film in a swine coronary model. Polymer-free EES with N-TiO₂ films (n = 30) and polymer-free sirolimus-eluting stents (SES; n = 30) were implanted in 30 pigs. Quantitative coronary analysis and optical coherence tomography were conducted immediately and at 1 (quantitative coronary analysis only), 3, and 6 months after stenting. Histopathologic examinations were performed at 1, 3, and 6 months after stenting. The polymer-free EES group had a lower percentage of neointimal growth than the polymer-free SES group at 3 months (22.5% ± 11.4% vs. 32.1% ± 12.3%; p < 0.001). The polymer-free EES group had a lower fibrin score than the polymer-free SES group at 1 month (1.9 ± 0.45 vs. 2.5 ± 0.54; p = 0.001). The re-endothelialization rates were similar between groups. The polymer-free EES group had a lower percentage of the area of stenosis than the polymer-free SES group throughout the follow-up period. The novel polymer-free EES with an N-TiO₂ film has superior safety and efficacy than the polymer-free SES at the 6-month follow-up in a swine model.

Background: A drug-eluting stent (DES) is a highly beneficial medical device used to widen or unblock narrowed blood vessels. However, the drugs released by the implantation of DES may hinder the re-endothelialization process, increasing the risk of late thrombosis. We have developed a tacrolimus-eluting stent (TES) that as acts as a potent antiproliferative and immunosuppressive agent, enhancing endothelial regeneration. In addition, we assessed the safety and efficacy of TES through both in vitro and in vivo tests. Methods: Tacrolimus and Poly(lactic-co-glycolic acid) (PLGA) were applied to the metal stent using electrospinning equipment. The surface morphology of the stent was examined before and after coating using a scanning electron microscope (SEM) and energy dispersive X-rays (EDX). The drug release test was conducted through high-performance liquid chromatography (HPLC). Cell proliferation and migration assays were performed using smooth muscle cells (SMC). The stent was then inserted into the porcine coronary artery and monitored for a duration of 4 weeks. Results: SEM analysis confirmed that the coating surface was uniform. Furthermore, EDX analysis showed that the surface was coated with both polymer and drug components. The HPCL analysis of TCL at a wavelength of 215 nm revealed that the drug was continuously released over a period of 4 weeks. Smooth muscle cell migration was significantly decreased in the tacrolimus group (54.1% ± 11.90%) compared to the non-treated group (90.1% ± 4.86%). In animal experiments, the stenosis rate was significantly reduced in the TES group (29.6% ± 7.93%) compared to the bare metal stent group (41.3% ± 10.18%). Additionally, the fibrin score was found to be lower in the TES group compared to the group treated with a sirolimus-eluting stent (SES). Conclusion: Similar to SES, TES reduces neointimal proliferation in a porcine coronary artery model, specifically decreasing the fibrins score. Therefore, tacrolimus could be considered a promising drug for reducing restenosis and thrombosis.

Background: Current polymer-based drug-eluting stents (DESs) have fundamental issues about inflammation and delayed re-endothelializaton of the vessel wall. Substance-P (SP), which plays an important role in inflammation and endothelial cells, has not yet been applied to coronary stents. Therefore, this study compares poly lactic-co-glycolic acid (PLGA)-based everolimus-eluting stents (PLGA-EESs) versus 2-methacryloyloxyethyl phosphorylcholine (MPC)-based SP-eluting stents (MPC-SPs) in in-vitro and in-vivo models. Methods: The morphology of the stent surface and peptide/drug release kinetics from stents were evaluated. The in-vitro proliferative effect of SP released from MPC-SP is evaluated using human umbilical vein endothelial cell. Finally, the safety and efficacy of the stent are evaluated after inserting it into a pig's coronary artery. Results: Similar to PLGA-EES, MPC-SP had a uniform surface morphology with very thin coating layer thickness (2.074 μm). MPC-SP showed sustained drug release of SP for over 2 weeks. Endothelial cell proliferation was significantly increased in groups treated with SP (n = 3) compared with the control (n = 3) and those with everolimus (n = 3) (SP: 118.9 ± 7.61% vs. everolimus: 64.3 ± 12.37% vs. the control: 100 ± 6.64%, p  < 0.05). In the animal study, the percent stenosis was higher in MPC-SP group (n = 7) compared to PLGA-EES group (n = 7) (MPC-SP: 28.6 ± 10.7% vs. PLGA-EES: 16.7 ± 6.3%, p  < 0.05). MPC-SP group showed, however, lower inflammation (MPC-SP: 0.3 ± 0.26 vs. PLGA-EES: 1.2 ± 0.48, p  < 0.05) and fibrin deposition (MPC-SP: 1.0 ± 0.73 vs. PLGA-EES: 1.5 ± 0.59, p  < 0.05) around the stent strut. MPC-SP showed more increased expression of cluster of differentiation 31, suggesting enhanced re-endothelialization. Conclusion: Compared to PLGA-EES, MPC-SP demonstrated more decreased inflammation of the vascular wall and enhanced re-endothelialization and stent coverage. Hence, MPC-SP has the potential therapeutic benefits for the treatment of coronary artery disease by solving limitations of currently available DESs.