Explore the vast range of titles available.

Nanotechnology represents an opportunity to improve the use of elements in agriculture. Selenium is an element that is beneficial to plants and essential to the human diet. The size of nanoparticles gives them characteristics that can enhance the benefits that selenium provides to plants. The objective of the present study was to determine the effects of selenium nanoparticles on the growth, antioxidant responses, and fruit quality of tomato developed under NaCl stress. Four doses of selenium nanoparticles (1, 5, 10, and 20 mg L−1) under NaCl stress, only NaCl, and a control were evaluated. The results showed that the impact of salinity on the growth of the tomato crop can be reduced with the application of selenium nanoparticles. However, the amount of both enzymatic and non-enzymatic compounds significantly increased in the leaves and fruits of tomato. The results suggest that the application of selenium nanoparticles generated a positive effect against salinity in the tomato crop; moreover, it had a positive impact on the content of beneficial biocompounds for human health in tomato fruits.

Chitosan is a natural polymer, which has been used in agriculture to stimulate crop growth. Furthermore, it has been used for the encapsulation of nanoparticles in order to obtain controlled release. In this work, the effect of chitosan–PVA and Cu nanoparticles (Cu NPs) absorbed on chitosan–PVA on growth, antioxidant capacity, mineral content, and saline stress in tomato plants was evaluated. The results show that treatments with chitosan–PVA increased tomato growth. Furthermore, chitosan–PVA increased the content of chlorophylls a and b, total chlorophylls, carotenoids, and superoxide dismutase. When chitosan–PVA was mixed with Cu NPs, the mechanism of enzymatic defense of tomato plants was activated. The chitosan–PVA and chitosan–PVA + Cu NPs increased the content of vitamin C and lycopene, respectively. The application of chitosan–PVA and Cu NPs might induce mechanisms of tolerance to salinity.

The tomato crop has great economic and nutritional importance; however, it can be adversely affected by salt stress. The objective of this research is to quantify the agronomic and biochemical responses of tomato plants developed under salt stress with the foliar application of copper nanoparticles. Four treatments were evaluated: foliar application of copper nanoparticles (250 mg L−1) with or without salt stress (50 mM NaCl), salt stress, and an absolute control. Saline stress caused severe damage to the development of tomato plants; however, the damage was mitigated by the foliar application of copper nanoparticles, which increased performance and improved the Na+/K+ ratio. The content of Cu increased in the tissues of tomato plants under salinity with the application of Cu nanoparticles, which increased the phenols (16%) in the leaves and the content of vitamin C (80%), glutathione (GSH) (81%), and phenols (7.8%) in the fruit compared with the control. Similarly, the enzyme activity of phenylalanine ammonia lyase (PAL), ascorbate peroxidase (APX), glutathione peroxidase (GPX), superoxide dismutase (SOD), and catalase (CAT) increased in leaf tissue by 104%, 140%, 26%, 8%, and 93%, respectively. Foliar spraying of copper nanoparticles on tomatoes under salinity appears to induce stress tolerance to salinity by stimulating the plant’s antioxidant mechanisms.

Iodine is not considered essential for land plants; however, in some aquatic plants, iodine plays a critical role in antioxidant metabolism. In humans, iodine is essential for the metabolism of the thyroid and for the development of cognitive abilities, and it is associated with lower risks of developing certain types of cancer. Therefore, great efforts are made to ensure the proper intake of iodine to the population, for example, the iodization of table salt. In the same way, as an alternative, the use of different iodine fertilization techniques to biofortify crops is considered an adequate iodine supply method. Hence, biofortification with iodine is an active area of research, with highly relevant results. The agricultural application of iodine to enhance growth, environmental adaptation, and stress tolerance in plants has not been well explored, although it may lead to the increased use of this element in agricultural practice and thus contribute to the biofortification of crops. This review systematically presents the results published on the application of iodine in agriculture, considering different environmental conditions and farming systems in various species and varying concentrations of the element, its chemical forms, and its application method. Some studies report beneficial effects of iodine, including better growth, and changes in the tolerance to stress and antioxidant capacity, while other studies report that the applications of iodine cause no response or even have adverse effects. We suggested different assumptions that attempt to explain these conflicting results, considering the possible interaction of iodine with other trace elements, as well as the different physicochemical and biogeochemical conditions that give rise to the distinct availability and the volatilization of the element.

Nanotechnology is a potential and emerging field with multiple applications in different areas of study. The beneficial effects of the use of nanoparticles in agriculture have already been proven. The objective of this research was to determine if the foliar application of Cu nanoparticles (NPs) could increase the content of the bioactive compounds in tomato fruits. Our study considered four treatments with different concentrations of Cu nanoparticles (50, 125, 250, 500 mg L−1, diameter 50 nm) applied twice during the development of the culture. The effects on the fruit quality and the contents of the antioxidant compounds were determined. The application of the Cu nanoparticles induced the production of fruits with greater firmness. Vitamin C, lycopene, and the ABTS antioxidant capacity increased compared to the Control. In addition, a decrease in the ascorbate peroxidase (APX) and glutathione peroxidase (GPX) enzymatic activity was observed, while the superoxide dismutase (SOD) and catalase (CAT) enzymes showed a significant increase. The application of Cu NPs induced a greater accumulation of bioactive compounds in tomato fruits.

Edible coatings are an appropriate way to preserve the quality of horticultural crops and reduce post-harvest losses. In this study, treatments with proline (Pro), chitosan (CTS) and proline-coated chitosan nanoparticles (CTS-Pro NPs) to maintain quality and reduce the decay of strawberry fruit were examined during storage at 4 °C for 12 days. The strawberries were treated with Pro 1 and 5 mM, CTS at 0.1% (w/v), CTS-Pro NPs at 0.1% (w/v) and distilled water (control) at 20 °C for 5 min. Following 3, 6, 9 and 12 days of cold storage, the fruits were removed from refrigeration, and some traits were evaluated one day after storage under shelf-life conditions. The results indicated that the fruit coated with CTS and CTS-Pro NPs showed reduced malondialdehyde and hydrogen peroxide content and less decay and weight loss compared to control and proline. CTS-Pro NPs also preserved fruit quality by conserving higher levels of ascorbic acid, total soluble solids, total phenolic content, and antioxidant capacity and enzymes. These results confirmed the benefit of using chitosan and CTS-Pro NP coatings to maintain fruit quality and increase the shelf life of strawberries by enhancing their antioxidant system and their ability to eliminate free radicals under cold storage.

Sulfur is an essential element in determining the productivity and quality of agricultural products. It is also an element associated with tolerance to biotic and abiotic stress in plants. In agricultural practice, sulfur has broad use in the form of sulfate fertilizers and, to a lesser extent, as sulfite biostimulants. When used in the form of bulk elemental sulfur, or micro- or nano-sulfur, applied both to the soil and to the canopy, the element undergoes a series of changes in its oxidation state, produced by various intermediaries that apparently act as biostimulants and promoters of stress tolerance. The final result is sulfate S+6, which is the source of sulfur that all soil organisms assimilate and that plants absorb by their root cells. The changes in the oxidation states of sulfur S0 to S+6 depend on the action of specific groups of edaphic bacteria. In plant cells, S+6 sulfate is reduced to S−2 and incorporated into biological molecules. S−2 is also absorbed by stomata from H2S, COS, and other atmospheric sources. S−2 is the precursor of inorganic polysulfides, organic polysulfanes, and H2S, the action of which has been described in cell signaling and biostimulation in plants. S−2 is also the basis of essential biological molecules in signaling, metabolism, and stress tolerance, such as reactive sulfur species (RSS), SAM, glutathione, and phytochelatins. The present review describes the dynamics of sulfur in soil and plants, considering elemental sulfur as the starting point, and, as a final point, the sulfur accumulated as S−2 in biological structures. The factors that modify the behavior of the different components of the sulfur cycle in the soil–plant–atmosphere system, and how these influences the productivity, quality, and stress tolerance of crops, are described. The internal and external factors that influence the cellular production of S−2 and polysulfides vs. other S species are also described. The impact of elemental sulfur is compared with that of sulfates, in the context of proper soil management. The conclusion is that the use of elemental sulfur is recommended over that of sulfates, since it is beneficial for the soil microbiome, for productivity and nutritional quality of crops, and also allows the increased tolerance of plants to environmental stresses.

The effects of nanoparticles (NPs) on plants are contrasting; these depend on the model plant, the synthesis of the nanoparticles (concentration, size, shape), and the forms of application (foliar, substrate, seeds). For this reason, the objective of this study was to report the impact of different concentrations of selenium (Se) and copper (Cu) NPs on yield, antioxidant capacity, and quality of tomato fruit. The different concentrations of Se and Cu NPs were applied to the substrate every 15 days (five applications). The yield was determined until day 102 after the transplant. Non-enzymatic and enzymatic antioxidant compounds were determined in the leaves and fruits as well as the fruit quality at harvest. The results indicate that tomato yield was increased by up to 21% with 10 mg L−1 of Se NPs. In leaves, Se and Cu NPs increased the content of chlorophyll, vitamin C, glutathione, 2,2′-azino-bis(3-ethylbenzthiazolin-6-sulfonic acid (ABTS), superoxide dismutase (SOD), glutathione peroxidase (GPX) and phenylalanine ammonia liasa (PAL). In fruits, they increased vitamin C, glutathione, flavonoids, firmness, total soluble solids, and titratable acidity. The combination of Se and Cu NPs at optimal concentrations could be a good alternative to improve tomato yield and quality, but more studies are needed to elucidate their effects more clearly.

The bell pepper is a vegetable with high antioxidant content, and its consumption is important because it can reduce the risk of certain diseases in humans. Plants can be affected by different types of stress, whether biotic or abiotic. Among the abiotic factors, there is saline stress that affects the metabolism and physiology of plants, which causes damage, decreasing productivity and quality of fruits. The objective of this work was to evaluate the application of selenium, silicon and copper nanoparticles and saline stress on the bioactive compounds of bell pepper fruits. The bell pepper plants were exposed to saline stress (25 mM NaCl and 50 mM) in the nutrient solution throughout the crop cycle. The nanoparticles were applied drenching solution of these to substrate (Se NPs 10 and 50 mg L−1, Si NPs 200 and 1000 mg L−1, Cu NPs 100 and 500 mg L−1). The results show that saline stress reduces chlorophylls, lycopene, and β-carotene in leaves; but increased the activity of some enzymes (e.g., glutathione peroxidase and phenylalanine ammonia lyase, and glutathione). In fruits, saline stress decreased flavonoids and glutathione. The nanoparticles increased chlorophylls, lycopene and glutathione peroxidase activity in the leaves; and ascorbate peroxidase, glutathione peroxidase, catalase and phenylalanine ammonia lyase activity, and also phenols, flavonoids, glutathione, β-carotene, yellow carotenoids in fruits. The application of nanoparticles to bell pepper plants under saline stress is efficient to increase the content of bioactive compounds in fruits.

Saline stress severely affects the growth and productivity of plants. The activation of hormonal signaling cascades and reactive oxygen species (ROS) in response to salt stress are important for cellular detoxification. Jasmonic acid (JA) and the enzyme SOD (superoxide dismutase), are well recognized markers of salt stress in plants. In this study, the application of chitosan-polyvinyl alcohol hydrogels (Cs-PVA) and copper nanoparticles (Cu NPs) on the growth and expression of defense genes in tomato plants under salt stress was evaluated. Our results demonstrate that Cs-PVA and Cs-PVA + Cu NPs enhance plant growth and also promote the expression of JA and SOD genes in tomato (Solanum lycopersicum L.), under salt stress. We propose that Cs-PVA and Cs-PVA + Cu NPs mitigate saline stress through the regulation of oxidative and ionic stress.