Explore the vast range of titles available.

Clay minerals have been recognized as one of the cheap and effective materials for wastewater remediation. Among the various clay minerals, montmorillonite (MMT) has received much attention due to its wide availability, low-cost and promising properties such as high porosity, mechanical strength, and cation exchange capacity. Additionally, MMT has high swelling properties. These features make it an ideal material for wastewater remediation applications. In addition, it possessed good cationic exchange capacity, making it easier to interact with various molecules. MMT and its composites exhibited good selectivity and catalytic activity for contaminants elimination from wastewater. Surface modification and functionalization have been identified as a way to improve the MMT’s adsorptive performance and endow it with light and light-harnessing properties. Thus, MMT composites, especially metal and metal-oxide nanoparticles, have shown good adsorption and photocatalytic activity toward the elimination/mineralization of various contaminants such as dyes, pharmaceuticals, heavy metals, and other organic and inorganic species. As such, MMT and its composites can be adopted as potential materials for wastewater remediation.

Cancer is a leading cause of death worldwide. Several classes of drugs are available to treat different types of cancer. Currently, researchers are paying significant attention to the development of drugs at the nanoscale level to increase their target specificity and to reduce their concentrations. Nanotechnology is a promising and growing field with multiple subdisciplines, such as nanostructures, nanomaterials, and nanoparticles. These materials have gained prominence in science due to their size, shape, and potential efficacy. Nanomedicine is an important field involving the use of various types of nanoparticles to treat cancer and cancerous cells. Synthesis of nanoparticles targeting biological pathways has become tremendously prominent due to the higher efficacy and fewer side effects of nanodrugs compared to other commercial cancer drugs. In this review, different medicinal plants and their active compounds, as well as green-synthesized metallic nanoparticles from medicinal plants, are discussed in relation to their anticancer activities.

This comprehensive review focuses on treatment technologies for produced water, with a particular emphasis on membrane-based systems. These systems offer significant advantages, including high contaminant removal efficiencies, compact design, and the potential for resource recovery. The review emphasizes the application of these technologies, their performance in meeting regulatory standards, and the challenges they face, such as operational efficiency and fouling. It highlights the need for further research and for the optimization of processes to enhance their efficiency. The integration of conventional methods with advanced treatment processes is also explored, with a vision toward developing hybrid systems for improved treatment efficiency. Overall, membrane-based systems show great promise for the treatment of produced water, but further advancements, sustainability considerations, and integration with other technologies are essential for their successful implementation in large-scale applications.

A large variety of pharmaceutical compounds have recently been detected in wastewater and natural water systems. This review highlighted the significance of removing pharmaceutical compounds, which are considered indispensable emerging contaminants, from wastewater and natural water systems. Various advanced oxidation processes (AOPs), including UV-H2O2, Fenton and photo-Fenton, ozone-based processes, photocatalysis, and physical processes, such as sonolysis, microwave, and electron beam irradiation, which are regarded as the most viable methods to eliminate different categories of pharmaceutical compounds, are discussed. All these AOPs exhibit great promising techniques, and the catalytic degradation process of the emerging contaminants, advantages, and disadvantages of each technique were deliberated. Heterogeneous photocatalysis employing metal oxides, particularly anatase TiO2 nanoparticles as catalysts activated by UV light irradiation, was reviewed in terms of the electron–hole separation, migration of the charge carriers to the catalyst surfaces, and redox potential of the charge carriers. This brief overview also emphasized that anatase TiO2 nanoparticles and TiO2-based nanomaterials are promising photocatalysts, and a combination of photocatalysis and other AOPs enhanced photocatalytic degradation efficiency. Finally, the challenges of applying anatase TiO2-based photocatalysis in environmental remediation and wastewater treatments to degrade pharmaceutical compounds, including mass spectroscopic analysis and a biological activity test of by-products of the emerging contaminants resulting from photocatalysis, are summarized.

Primarily produced via transesterification of lipid sources, fatty acid methyl ester (FAME) of biodiesel derived from insect larvae has gained momentum in a great deal of research done over other types of feedstock. From the self-harvesting nature of black soldier fly larvae (BSFL), research had, however, only concentrated on the harvest of BSFL on sixth instar. Through rearing BSFL on coconut endosperm waste (CEW), 100 BSFL were harvested at the fifth and sixth instar, then modification on CEW with mixed-bacteria powder was carried out. It was found that the fifth instar BSFL had 34% lipid content, which was 8% more than the sixth instar. Both instars had similar corrected protein contents around 35–38%. The sixth instar BSFL contained around 19% of chitin, which was about 11% more than the fifth instar. Biodiesel products from both instars showed no differences in terms of FAME content. With modification on CEW, at 0.5 wt% of mixed-bacteria powder concentration, the maximum waste-to-biomass conversion (WBC) and protein conversion (PC) were achieved at 9% and 60%, respectively. Moreover, even with the shorter fermentation time frame of CEW, it did not affect the development of BSFL in terms of its WBC and PC when fed with 14 and 21 days fermented medium. FAME from all groups set, which predominantly constituted about C12:0 at around 60%, followed by C14:0 at around 15%, C16:0, and C18:1 both at 10% on average. Lastly, the FAME yield from BSFL was improved from 25% (sixth instar) to 33% (fifth instar) and showed its highest at 38.5% with modification on raw CEW with 0.5 wt% mixed-bacteria powder and fermented for 21 days. Thus, harvesting BSFL at earlier instar is more beneficial and practical, as it improves the FAME yield from the BSFL biomass.

Endophytic fungi are microorganisms that colonize living plants’ tissues without causing any harm. They are known as a natural source of bioactive metabolites with diverse pharmacological functions. Many structurally different chemical metabolites were isolated from endophytic fungi. Recently, the increasing trends in human health problems and diseases have escalated the search for bioactive metabolites from endophytic fungi. The conventional bioassay-guided study is known as laborious due to chemical complexity. Thus, metabolomics studies have attracted extensive research interest owing to their potential in dealing with a vast number of metabolites. Metabolomics coupled with advanced analytical tools provides a comprehensive insight into systems biology. Despite its wide scientific attention, endophytic fungi metabolomics are relatively unexploited. This review highlights the recent developments in metabolomics studies of endophytic fungi in obtaining the global metabolites picture.

Amongst the environmental issues throughout the world, organic synthetic dyes continue to be one of the most important subjects in wastewater remediation. In this paper, the photocatalytic degradation of the dimethylmethane fluorescent dye, Auramine O (AO), was investigated in a heterogeneous aqueous solution with 100 nm anatase TiO2 nanoparticles (NPs) under 365 nm light irradiation. The effect of irradiation time was systematically studied, and photolysis and adsorption of AO on TiO2 NPs were also evaluated using the same experimental conditions. The kinetics of AO photocatalytic degradation were pseudo-first order, according to the Langmuir–Hinshelwood model, with a rate constant of 0.048 ± 0.002 min−1. A maximum photocatalytic efficiency, as high as 96.2 ± 0.9%, was achieved from a colloidal mixture of 20 mL (17.78 μmol L−3) AO solution in the presence of 5 mg of TiO2 NPs. The efficiency of AO photocatalysis decreased nonlinearly with the initial concentration and catalyst dosage. Based on the effect of temperature, the activation energy of AO photocatalytic degradation was estimated to be 4.63 kJ mol−1. The effect of pH, additional scavengers, and H2O2 on the photocatalytic degradation of AO was assessed. No photocatalytic degradation products of AO were observed using UV–visible and Fourier transform infrared spectroscopy, confirming that the final products are volatile small molecules.

The CO2 absorption flux while using monoethanolamide (MEA) solution in a spiral-wired channel was significantly enhanced by optimizing both the descending and ascending spiral ring pitch configurations within the filled channel. In this study, two distinct spiral ring pitch configurations were integrated into concentric circular membrane contactors to augment CO2 absorption flux. Spiral rods were strategically inserted to mitigate concentration polarization effects, thereby reducing mass transfer boundary layers and increasing turbulence intensity. A theoretical one-dimensional model was developed to predict absorption flux and concentration distributions across varying MEA absorbent flow rates, CO2 feed flow rates, and inlet CO2 concentrations in the gas feed. Theoretical predictions of absorption flux improvement were validated against experimental results, demonstrating favorable agreement for both ascending and descending spiral ring pitch operations. Interestingly, the results indicated that descending spiral ring pitch operations achieved higher turbulent intensity compared to ascending configurations, thereby alleviating concentration polarization resistance and enhancing CO2 absorption flux with reduced polarization effects. Specifically, under conditions of a 40% inlet CO2 concentration and 5 cm3/s MEA feed flow rate, a notable 83.69% enhancement in absorption flux was achieved compared to using an empty channel configuration. Moreover, a generalized expression for the Sherwood number was derived to predict the mass transfer coefficient for CO2 absorption in concentric circular membrane contactors, providing a practical tool for performance estimation. The economic feasibility of the spiral-wired module was also assessed by evaluating both absorption flux improvement and incremental power consumption. Overall, these findings underscore the effectiveness of optimizing spiral ring pitch configurations in enhancing CO2 absorption flux, offering insights into improving the efficiency and economic viability of CO2 capture technologies.

In recent years, numerous studies have focused on the use of biochar as a biological material for environmental remediation due to its low-cost precursor (waste), low toxicity, and diversity of active sites, along with their facile tailoring techniques. Due to its versatility, biochar has been employed as an adsorbent, catalyst (for activating hydrogen peroxide, ozone, persulfate), and photocatalyst. This review aims to provide a comprehensive overview and compare the application of biochar in water remediation. First, the biochar active sites with their functions are presented. Secondly, an overview and summary of biochar performance in treating organic pollutants in different systems is depicted. Thereafter, an evaluation on performance, removal mechanism, active sites involvement, tolerance to different pH values, stability, and reusability, and an economic analysis of implementing biochar for organic pollutants decontamination in each application is presented. Finally, potential prospects to overcome the drawbacks of each application are provided.

Third-generation biofuels that are derived from microalgal biomass have gained momentum as a way forward in the sustainable production of biodiesel. Such efforts are propelled by the intention to reduce our dependence on fossil fuels as the primary source of energy. Accordingly, growing microalgal biomass in the form of suspended cultivation has been a conventional technique for the past few decades. To overcome the inevitable harvesting shortcomings arising from the excessive energy and time needed to separate the planktonic microalgal cells from water medium, researchers have started to explore attached microalgal cultivation systems. This cultivation mode permits the ease of harvesting mature microalgal biomass, circumventing the need to employ complex harvesting techniques to single out the cells, and is economically attractive. However, the main bottleneck associated with attached microalgal growth is low biomass production due to the difficulties the microalgal cells have in forming attachment and populating thereafter. In this regard, the current review encompasses the novel techniques adopted to promote attached microalgal growth. The physicochemical effects such as the pH of the culture medium, hydrophobicity, as well as the substratum surface properties and abiotic factors that can determine the fate of exponential growth of attached microalgal cells, are critically reviewed. This review aims to unveil the benefits of an attached microalgal cultivation system as a promising harvesting technique to produce sustainable biodiesel for lasting applications.