Explore the vast range of titles available.

Non-fullerene based organic solar cells display a high initial power conversion efficiency but continue to suffer from poor thermal stability, especially in case of devices with thick active layers. Mixing of five structurally similar acceptors with similar electron affinities, and blending with a donor polymer is explored, yielding devices with a power conversion efficiency of up to 17.6%. The hexanary device performance is unaffected by thermal annealing of the bulk-heterojunction active layer for at least 23 days at 130 °C in the dark and an inert atmosphere. Moreover, hexanary blends offer a high degree of thermal stability for an active layer thickness of up to 390 nm, which is advantageous for high-throughput processing of organic solar cells. Here, a generic strategy based on multi-component acceptor mixtures is presented that permits to considerably improve the thermal stability of non-fullerene based devices and thus paves the way for large-area organic solar cells. Non-fullerene-based organic solar cells generally suffer from poor thermal stability and especially in case of devices with thick active layers. Here, the authors report hexanary blends based on multi-component acceptor mixtures with a device efficiency of 17.6% and thermally stability for 23 days at 130 °C.

The reported power conversion efficiencies (PCEs) of nonfullerene acceptor (NFA) based organic photovoltaics (OPVs) now exceed 14% and 17% for single‐junction and two‐terminal tandem cells, respectively. However, increasing the PCE further requires an improved understanding of the factors limiting the device efficiency. Here, the efficiency limits of single‐junction and two‐terminal tandem NFA‐based OPV cells are examined with the aid of a numerical device simulator that takes into account the optical properties of the active material(s), charge recombination effects, and the hole and electron mobilities in the active layer of the device. The simulations reveal that single‐junction NFA OPVs can potentially reach PCE values in excess of 18% with mobility values readily achievable in existing material systems. Furthermore, it is found that balanced electron and hole mobilities of >10−3 cm2 V−1 s−1 in combination with low nongeminate recombination rate constants of 10−12 cm3 s−1 could lead to PCE values in excess of 20% and 25% for single‐junction and two‐terminal tandem OPV cells, respectively. This analysis provides the first tangible description of the practical performance targets and useful design rules for single‐junction and tandem OPVs based on NFA materials, emphasizing the need for developing new material systems that combine these desired characteristics. The efficiency limits in non‐fullerene organic solar cells are examined using a numerical simulator. Power conversion efficiency (PCE) of over 18% using recently reported carrier mobility values and voltage losses, are predicted. Increasing the mobility to >10−3 cm2 V−1 s−1 and decreasing the recombination constant to <10−12 cm3 s−1 is shown to yield a single‐junction and 2T‐tandem cell with PCEs of >20% and >25%, respectively.

In bulk heterojunction (BHJ) organic solar cells (OSCs) both the electron affinity (EA) and ionization energy (IE) offsets at the donor–acceptor interface should equally control exciton dissociation. Here, we demonstrate that in low-bandgap non-fullerene acceptor (NFA) BHJs ultrafast donor-to-acceptor energy transfer precedes hole transfer from the acceptor to the donor and thus renders the EA offset virtually unimportant. Moreover, sizeable bulk IE offsets of about 0.5 eV are needed for efficient charge transfer and high internal quantum efficiencies, since energy level bending at the donor–NFA interface caused by the acceptors’ quadrupole moments prevents efficient exciton-to-charge-transfer state conversion at low IE offsets. The same bending, however, is the origin of the barrier-less charge transfer state to free charge conversion. Our results provide a comprehensive picture of the photophysics of NFA-based blends, and show that sizeable bulk IE offsets are essential to design efficient BHJ OSCs based on low-bandgap NFAs. A systematic analysis of a series of donor–acceptor organic blends shows that in solar cells based on low-bandgap non-fullerene acceptors an ionization energy offset of about 0.5 eV is required to ensure efficient charge separation.

This study reports on the optoelectronic properties of porphyrin-based metal–organic framework (MOF) thin films fabricated by a facile liquid-phase epitaxy approach. This approach affords the growth of MOF thin films that are free of morphological imperfections, more suitable for optoelectronic applications. Chemical modifications such as the porphyrin ligand metallation have been found to preserve the morphology of the grown films making this approach particularly suitable for molecular alteration of MOF thin film optoelectronic properties without compromising its mesoscale morphology significantly. Particularly, the metallation of the ligand was found to be effective to tune the MOF bandgap. These porphyrin-based MOF thin films were shown to function effectively as donor layers in solar cells based on a Fullerene-C60 acceptor. The ability to fabricate MOF solar cells free of a liquid-phase acceptor greatly simplifies device fabrication and enables pairing of MOFs as light absorbers with a wide range of acceptors including non-fullerene acceptors.

Non-fullerene acceptor (NFA)-based ternary bulk heterojunction solar cells (TSC) are the most efficient organic solar cells (OSCs) today due to their broader absorption and quantum efficiencies (QE) often surpassing those of corresponding binary blends. We study how the energetics driving charge transfer at the electron donor:electron acceptor (D/A) interfaces impact the QE in blends of PBDB-T-2F donor with several pairs of lower bandgap NFAs. As in binary blends, the ionization energy offset between donor and acceptor ({\\Delta}IE) controls the QE and maximizes for {\\Delta}IE > 0.5 eV. However, {\\Delta}IE is not controlled by the individual NFAs IEs but by their average, weighted for their blending ratio. Using this property, we improved the QE of a PBDB-T-2F:IEICO binary blend that had an insufficient {\\Delta}IE for charge generation by adding a deep IE third component: IT-4F. Combining two NFAs enables to optimize the D/A energy alignment and cells' QE without molecular engineering.

2D Ruddlesden - Popper perovskites are promising candidates for energy harvesting applications due to their tunable optical properties and excellent ambient stability. Moreover, they are solution-processable and compatible with upscalable manufacturing via various printing techniques. Unfortunately, such methods often induce large degrees of heterogeneity due to poorly controlled crystallization. Here, we address this issue by blending the well-known 2D perovskite (PEA)2PbBr4 with an organic small-molecule, namely C8-BTBT, employed as an additive with different blending ratios. Using terahertz (THz) absorption and temperature-dependent photoluminescence (PL) spectroscopy techniques we observe that with the C8-BTBT additive the photophysical properties are altered while the perovskite structure in the film remains unaffected. More precisely, the inclusion of trace amounts of C8-BTBT in the hybrid films results in defect passivation at perovskite platelet boundaries and at the surfaces, as indicated by increased carrier lifetimes and substantially increased photoluminescence quantum yields (PLQY). This in turn improves the responsivity of photodetectors using the 2D perovskite as active layer. Our study highlights a straightforward strategy for fabricating high-quality 2D perovskites via large-area processing techniques.

The high photoluminescence efficiency, color purity, extended gamut, and solution processability make low-dimensional hybrid perovskites attractive for light-emitting diode (PeLED) applications. However, controlling the microstructure of these materials to improve the device performance remains challenging. Here, the development of highly efficient green PeLEDs based on blends of the quasi-2D (q2D) perovskite, PEA2Cs4Pb5Br16, and the wide bandgap organic semiconductor 2,7 dioctyl[1] benzothieno[3,2-b]benzothiophene (C8-BTBT) is reported. The presence of C8-BTBT enables the formation of single-crystal-like q2D PEA2Cs4Pb5Br16 domains that are uniform and highly luminescent. Combining the PEA2Cs4Pb5Br16:C8-BTBT with self-assembled monolayers (SAMs) as hole-injecting layers (HILs), yields green PeLEDs with greatly enhanced performance characteristics, including external quantum efficiency up to 18.6%, current efficiency up to 46.3 cd/A, the luminance of 45 276 cd m^-2, and improved operational stability compared to neat PeLEDs. The enhanced performance originates from multiple synergistic effects, including enhanced hole-injection enabled by the SAM HILs, the single crystal-like quality of the perovskite phase, and the reduced concentration of electronic defects. This work highlights perovskite:organic blends as promising systems for use in LEDs, while the use of SAM HILs creates new opportunities toward simpler and more stable PeLEDs.

A cluster-randomized, controlled trial in rural areas of Bangladesh, Pakistan, and Sri Lanka assessed a community-based intervention for treating hypertension. The intervention, which included home visits by community health workers and training of physicians, was more effective than usual care in controlling hypertension.

Several environmental stresses, including biotic and abiotic factors, adversely affect the growth and development of crops, thereby lowering their yield. However, abiotic factors, e.g., drought, salinity, cold, heat, ultraviolet radiations (UVr), reactive oxygen species (ROS), trace metals (TM), and soil pH, are extremely destructive and decrease crop yield worldwide. It is expected that more than 50% of crop production losses are due to abiotic stresses. Moreover, these factors are responsible for physiological and biochemical changes in plants. The response of different plant species to such stresses is a complex phenomenon with individual features for several species. In addition, it has been shown that abiotic factors stimulate multi-gene responses by making modifications in the accumulation of the primary and secondary metabolites. Metabolomics is a promising way to interpret biotic and abiotic stress tolerance in plants. The study of metabolic profiling revealed different types of metabolites, e.g., amino acids, carbohydrates, phenols, polyamines, terpenes, etc, which are accumulated in plants. Among all, primary metabolites, such as amino acids, carbohydrates, lipids polyamines, and glycine betaine, are considered the major contributing factors that work as osmolytes and osmoprotectants for plants from various environmental stress factors. In contrast, plant-derived secondary metabolites, e.g., phenolics, terpenoids, and nitrogen-containing compounds (alkaloids), have no direct role in the growth and development of plants. Nevertheless, such metabolites could play a significant role as a defense by protecting plants from biotic factors such as herbivores, insects, and pathogens. In addition, they can enhance the resistance against abiotic factors. Therefore, metabolomics practices are becoming essential and influential in plants by identifying different phytochemicals that are part of the acclimation responses to various stimuli. Hence, an accurate metabolome analysis is important to understand the basics of stress physiology and biochemistry. This review provides insight into the current information related to the impact of biotic and abiotic factors on variations of various sets of metabolite levels and explores how primary and secondary metabolites help plants in response to these stresses.