Explore the vast range of titles available.

The randomized study aimed to evaluate the comparability of in situ (iS) and in vitro (iV) study protocols regarding remineralization of artificial enamel lesions. Two toothpastes (group A: 1450 ppm sodium fluoride, group B: placebo 0 ppm F-), were investigated. IV, a pH-cycling model with toothpaste slurry treatment was applied for 10d. IS, remineralization was performed in 9 participants wearing splints with embedded enamel samples for 10 and 21d, randomly allocated to groups A and B. Samples were scanned by X-ray micro-computed tomography (μCT) and grayscale value line profiles corresponding to mineral density (rel.ΔZ) were analyzed. Statistical analyses were performed using MedCalc Statistical Software, v22.021. T-Test for dependent and independent data and analysis of variance (ANOVA) were used for further analyses (α = 0.05). Rel.ΔZ of fluoride treated samples (A) were iV = 40.2%, iS 10d = 11.5% and iS 21d = 46.1% (p > 0.05). Rel.ΔZ of placebo treated samples (B) were: iV = − 6.2%, iS 10d = 25.2% and iS 21d = 11.0% (p > 0.05). Remineralization potential of both toothpastes was significantly different regarding iV (p < 0.001) and iS after 21d (p = 0.034), while in case of iS 10d no significant difference was detected (p = 0.4). Despite different study protocols the μCT results after remineralization were comparable between iV and iS. The results suggest that selected studies can be carried out in faster, simplified iV studies using pH-cycling instead of iS studies.

Dentin hypersensitivity is an oral health concern affecting a large percentage of the world's adult population. Occlusion of the exposed dentinal tubules is among the treatment options available, and silver diammine fluoride (SDF) is an occluding agent used for interrupting or dampening the stimulus of the dental pulp nerves that produce pain. In addition to dentin permeability testing, the evaluation of desensitizing agents occluding dentinal tubules strongly relies on microscopic techniques, such as scanning electron microscopy (SEM). Limitations of SEM are that it provides only surface images that lack detailed information on the depth of penetration and amount of material present within the treated specimen, and it is prone to sample preparation artifacts. Here, we present high-resolution X-ray computed tomography (nano-CT) as a potential method for investigating dentin specimens with occluded tubules. We studied human dentin treated with SDF as an exemplary dentinal occlusion treatment option. We evaluated the silver deposits formed on the dentin surface region near the dentinal tubules and in the tubular regions using cross-section SEM, Energy Dispersive X-ray (EDX) analysis, and nano-CT. The resulting images obtained by SEM and nano-CT had comparable resolutions, and both techniques produced images of the tubules' occlusion. Nano-CT provided three-dimensional images adequate to quantitate tubule size and orientation in space. Moreover, it enabled clear visualization of dentinal tubules in any virtual plane and estimation of the amount and depth of occluding material. Thus, nano-CT has the potential to be a valuable technique for evaluating the occluding effects of virtually any material applied to dentinal tubules, supporting deciding between the best occluding treatment options.

Background The various physical and chemical conditions within the oral cavity are hypothesized to have a significant influence on the behavior of denture adhesives and therefore the overall comfort of denture wearers. As such, this study aims to understand the influence of oral cavity physiological parameters such as temperature (17 to 52 °C), pH (2, 7, 10), and denture adhesive swelling due to saliva (20–120%) on the behavior of denture adhesives. This study further aims to emphasize the need for a collective approach to modelling the in-situ behavior of denture adhesives. Methods Rheological measurements were carried out using the Super Polygrip Ultra fresh brand denture adhesive cream to evaluate its storage modulus (G´) and loss modulus (G´´) values at a range of physiologically relevant temperatures, pH values, and degrees of swelling, to represent and characterize the wide variety of conditions that occur within the oral cavity. Results Rheological data was recorded with respect to variation of temperature, pH, and swelling. Overall, it can be seen that the physiological conditions of the oral cavity have an influence on the rheological properties of the denture adhesive cream. Specifically, our data indicates that the adhesive’s mechanical properties are weakly influenced by pH, but do change with respect to the temperature in the oral cavity and the swelling rate of the adhesive. Conclusions Our results suggest that the collective inter-play of the parameters pH, temperature and swelling ratio have an influence on the behavior of the denture adhesive. The results clearly highlight the need for developing a multi-parameter viscoelastic material model to understand the collective influence of physiological parameters on the performance of denture adhesives. Multi-parameter models can also potentially be utilized in numerically simulating denture adhesives using finite element simulations.

Background Toothbrushes require flexibility to access all dental surfaces and remove plaque effectively, but they should also aim to prevent or limit overbrushing and consequent damage to teeth and gums. In two studies, the physical properties and cleaning performance of specialist test toothbrushes with flexible necks were compared to a reference rigid-necked toothbrush. Methods In Study 1, a universal testing machine (Instron E 10,000) with a specially designed setup was used to test the deflection behaviour of toothbrush head and neck. Untufted toothbrushes were fixed in a custom holder and force was applied to the head while the deflection was measured. In Study 2, one control and five test toothbrushes were assessed using a robot system to simulate the cleaning of artificial plaque from defined surfaces of artificial replicated human teeth in a model oral cavity (typodonts). Results Study 1 showed that the flexible-neck toothbrush deflected 2 to 2.5 times more than the rigid-neck reference toothbrush when same force was applied to the toothbrush head. Study 2 revealed that all five test toothbrushes showed statistically superior simulated plaque removal to the reference toothbrush. This superiority was observed for all test toothbrushes employing horizontal and rotating brushing action (all p  = 0.001) but only three of the five toothbrushes when vertical brushing was employed (all p  = 0.001). Cleaning efficacy of the test toothbrushes was demonstrated both interdentally and at the gumline locations. The Complete Protection toothbrush showed the most effective cleaning performance followed by the Repair and Protect and Rapid Relief toothbrushes. Conclusion The addition of a flexible-neck component to the toothbrush designs helped to reduce stiffness and may allow more effective cleaning compared to rigid designs with controlled force distribution on the teeth and gums. This may help to provide plaque control at all potential risk areas in an in vitro robot model and could support good oral hygiene in-use.

Objective Silver diamine fluoride (SDF) is effective in treatment of dentin hypersensitivity and caries lesions. However, the non-viscous solution does not easily allow clinicians to control the application area. A 38% SDF experiment gel was compared in vitro to commercial SDF for its ability to penetrate and occlude dentinal tubules.Materials and methodsHuman root surface dentin specimens were treated with gelled or standard 38% SDF or negative control. Penetration behavior was established by Drop Shape Analysis. Precipitates at the surface and within tubules were analyzed by SEM and EDX after treatment; Results: penetration depths up to 500 µm were observed for both SDF formulations. Both formulations occluded dentinal tubules similarly. Precipitates on the dentin surface and within dentinal tubules were found for both SDF formulations, with a slight tendency for the experimental gel SDF product to be more abundant than the commercially available one. Discussion: behavior of the experimental 38% SDF gel formulation appeared indistinguishable from the commercial 38% SDF product with respect to dentinal tubule penetration and occlusion.ConclusionsThe experimental 38% SDF gel may be a suitable intervention for the prevention of dentin hypersensitivity.

Background Restorative solutions designed for edentulous patients such as dentures and their accompanying denture adhesives operate in the complex and dynamic environment represented by human oral physiology. Developing material models accounting for the viscoelastic behavior of denture adhesives can facilitate their further optimization within that unique physiological environment. This study aims to statistically quantify the degree of significance of three physiological variables - namely: temperature, adhesive swelling, and pH - on denture adhesive mechanical behavior. Further, based on these statistical significance estimations, a previously-developed viscoelastic material modelling approach for such denture adhesives is further expanded and developed to capture these variables’ effects on mechanical behavior. Methods In this study a comparable version of Denture adhesive Corega Comfort was analysed rheologically using the steady state frequency sweep tests. The experimentally derived rheological storage and loss modulus values for the selected physiological variables were statistically analyzed using multi parameter linear regression analysis and the Pearson’s coefficient technique to understand the significance of each individual parameter on the relaxation spectrum of the denture adhesive. Subsequently, the parameters are incorporated into a viscoelastic material model based on Prony series discretization and time-temperature superposition, and the mathematical relationship for the loss modulus is deduced. Results The results of this study clearly indicated that the variation in both the storage and loss modulus values can be accurately predicted using the oral cavity physiological parameters of temperature, swelling ratio, and pH with an adjusted R 2 value of 0.85. The R 2 value from the multi-parameter regression analysis indicated that the predictor variables can estimate the loss and storage modulus with a reasonable accuracy for at least 85% of the rheologically determined continuous relaxation spectrum with a confidence level of 98%. The Pearson’s coefficient for the independent variables indicated that temperature and swelling have a strong influence on the loss modulus, whereas pH had a weak influence. Based on statistical analysis, these mathematical relationships were further developed in this study. Conclusions This multi-parameter viscoelastic material model is intended to facilitate future detailed numerical investigations performed with implementation of denture adhesives using the finite element method.

Physiological parameters of the oral cavity have a profound impact on any restorative solutions designed for edentulous patients including denture adhesives. This study aims to mathematically quantify the influence of three such variables, namely: the temperature, pH, and the swelling of such adhesives under the influence of saliva on its mechanical behavior. The mathematical quantification is further aimed to implement a material model for such adhesives which considers the impact of such physiological factors. The denture adhesive is experimentally investigated by means of rheological steady state frequency sweep tests to obtain the relaxation spectrum of the material. The relaxation behavior is measured for a wide range of oral cavity temperatures and pH. Also, the adhesive is hydrated and upon swelling to different levels again tested to understand the impact of swelling on the mechanical behavior. The experimentally measured continuous relaxation spectrum is modeled as a viscoelastic material using a discrete set of points based on the Prony series discretization technique. The relaxation spectrums for various temperatures are compared and the possibility of a time-temperature superposition is explored for the model. Similarly, the measured values of Storage and loss modulus are investigated to understand the role of pH and swelling. The results in this study clearly indicated a horizontal shift in the relaxation behavior with increase in temperature. And hence, the time-temperature shift factor was calculated for the adhesive. The relaxation spectrum also showed a strong correlation with swelling of the adhesive and the pH. The influence of these two parameters were captured into the model based on the relaxation time parameter in the Prony series approach. Based on this study the impact of these parameters could be appreciated on the performance and mechanical behavior of denture adhesives and implemented into a Prony series based viscoelastic material model which can be used with numerical simulations.

Periodontal therapy using antimicrobials that are topically applied requires slow or controlled release devices. The in vitro antimicrobial activity of biodegradable polymer formulations that contain a new minocycline lipid complex (P-MLC) was evaluated. The new P-MLC formulations that contained 11.5% minocycline were compared with pure minocycline or an existing commercial formulation, which included determination of minimal inhibitory concentration (MIC) values against two oral bacteria and activity on six-species periodontal biofilm. Moreover, the flow of gingival crevicular fluid (GCF) was modeled up to 42 days and the obtained eluates were tested both for MIC values and inhibiting biofilm formation. In general, MICs of the P-MLC formulations were slightly increased as compared with pure minocycline. Biofilm formation was clearly inhibited by all tested formulations containing minocycline with no clear difference between them. In 3.5 day old biofilms, all formulations with 250 µg/mL minocycline decreased bacterial counts by 3 log10 and metabolic activity with no difference to pure antimicrobials. Eluates of experimental formulations showed superiority in antimicrobial activity. Eluates of one experimental formulation (P503-MLC) still inhibited biofilm formation at 28 days, with a reduction by 1.87 log10 colony forming units (CFU) vs. the untreated control. The new experimental formulations can easily be instilled in periodontal pockets and represent alternatives in local antimicrobials, and thus warrant further testing.

Background: Adjunctive treatment of periodontitis lacks solutions which allow for enough time for wound healing in the periodontal pockets by avoiding fast re-colonization. Such a solution might be an antibiotic-containing formulation with a controlled release over a period of weeks. Here, a recently described minocycline-containing approach is qualified for further clinical development by focusing on proof-of-concept, systemic burden, resistance development, and degradation studies. Methods: Animal studies were done in two different (mouse-chamber, rat Porphyromonas gingivalis challenging) models, including effects on inflammation markers, bone loss, and bone structure. Also, serum concentrations of minocycline after local application were determined by HPLC-MS/MS. The resistance status of bacterial clinical isolates against minocycline was investigated and the degradation of the formulation was characterized by laser scanning and scanning electron microscopy. Results: Animal studies clearly demonstrated the applicability of the new formulation in the investigated models. Inflammation markers decreased in a dose-dependent manner and reduced bone loss compared to non-treated group was observed. Therefore, the systemic burden of the antibiotic was neglectable. Minocycline is still effective against oral pathogens; resistance development was not seen. The biodegradable thread was first swollen and subsequently degraded over a period of weeks. Conclusions: The results support the continued clinical development of this new formulation. A phase I clinical trial is planned to further evaluate its safety and efficacy.

The base fit between a removable partial denture (RPD) and the underlying soft tissue plays a significant role in its performance. The application of a denture adhesive is hypothesized to result in better retention of RPDs and, as a result, contribute to lower stress on the oral mucosa. The objectives of this study were to observe and compare the distribution of simulated bite forces applied to the RPD through the abutments and soft tissue for models with and without the use of a denture adhesive. Furthermore, we evaluated the possible benefit of using a denture adhesive in lowering stresses on the oral mucosa. The RPD, mandible, oral mucosa, abutment teeth supporting the RPD, and the corresponding abutment periodontal ligaments (PDLs) were modelled as 3D volumes based on computer tomography (CT) datasets. A viscoelastic adhesive layer between the RPD and oral mucosa was incorporated into this base model using Prony series approximation. The layer was developed as a volume extract using the denture surface. Finite element (FE) simulations were performed for the bite force on one of the RPD segments, with the resulting force and moments experienced by the dental structures and oral mucosa compared between the model with the adhesive layer and the base model without. As a result, the contact pressure on the oral mucosa for the model with the denture adhesive decreased to 0.15 MPa as compared to 0.25 MPa for the model without the adhesive. The potential role of denture adhesives in leading to a better fit between the RPD and oral mucosa as well as lowering contact pressures could be used to improve comfort in patients wearing RPDs.