Explore the vast range of titles available.

The orbital Hall effect describes the generation of the orbital current flowing in a perpendicular direction to an external electric field, analogous to the spin Hall effect. As the orbital current carries the angular momentum as the spin current does, injection of the orbital current into a ferromagnet can result in torque on the magnetization, which provides a way to detect the orbital Hall effect. With this motivation, we examine the current-induced spin-orbit torques in various ferromagnet/heavy metal bilayers by theory and experiment. Analysis of the magnetic torque reveals the presence of the contribution from the orbital Hall effect in the heavy metal, which competes with the contribution from the spin Hall effect. In particular, we find that the net torque in Ni/Ta bilayers is opposite in sign to the spin Hall theory prediction but instead consistent with the orbital Hall theory, which unambiguously confirms the orbital torque generated by the orbital Hall effect. Our finding opens a possibility of utilizing the orbital current for spintronic device applications, and it will invigorate researches on spin-orbit-coupled phenomena based on orbital engineering. The orbital Hall effect involves the transport of orbital angular momentum perpendicular to an applied charge current, analogous to the spin Hall effect. Here, Lee et al examine magnetic torques present in a Nickel/Tantalum bilayer, clearly demonstrating the contribution of the orbital Hall effect.

Magnetic torques generated through spin–orbit coupling1–8 promise energy-efficient spintronic devices. For applications, it is important that these torques switch films with perpendicular magnetizations without an external magnetic field9–14. One suggested approach15 to enable such switching uses magnetic trilayers in which the torque on the top magnetic layer can be manipulated by changing the magnetization of the bottom layer. Spin currents generated in the bottom magnetic layer or its interfaces transit the spacer layer and exert a torque on the top magnetization. Here we demonstrate field-free switching in such structures and show that its dependence on the bottom-layer magnetization is not consistent with the anticipated bulk effects15. We describe a mechanism for spin-current generation16,17 at the interface between the bottom layer and the spacer layer, which gives torques that are consistent with the measured magnetization dependence. This other-layer-generated spin–orbit torque is relevant to energy-efficient control of spintronic devices.

Spin Hall effect, an electric generation of spin current, allows for efficient control of magnetization. Recent theory revealed that orbital Hall effect creates orbital current, which can be much larger than spin-Hall-induced spin current. However, orbital current cannot directly exert a torque on a ferromagnet, requiring a conversion process from orbital current to spin current. Here, we report two effective methods of the conversion through spin-orbit coupling engineering, which allows us to unambiguously demonstrate orbital-current-induced spin torque, or orbital Hall torque. We find that orbital Hall torque is greatly enhanced by introducing either a rare-earth ferromagnet Gd or a Pt interfacial layer with strong spin-orbit coupling in Cr/ferromagnet structures, indicating that the orbital current generated in Cr is efficiently converted into spin current in the Gd or Pt layer. Our results offer a pathway to utilize the orbital current to further enhance the magnetization switching efficiency in spin-orbit-torque-based spintronic devices. Manipulation of the magnetization is of major importance in spintronics. The authors demonstrate that an electric field triggers a transverse flow of orbital moment: the so-called orbital Hall effect. This enables the efficient magnetization control, holding the promise for fast and miniaturized memories and sensors.

Antiferromagnetic spin waves have been predicted to offer substantial functionalities for magnonic applications due to the existence of two distinct polarizations, the right-handed and left-handed modes, as well as their ultrafast dynamics. However, experimental investigations have been hampered by the field-immunity of antiferromagnets. Ferrimagnets have been shown to be an alternative platform to study antiferromagnetic spin dynamics. Here we investigate thermally excited spin waves in ferrimagnets across the magnetization compensation and angular momentum compensation temperatures using Brillouin light scattering. Our results show that right-handed and left-handed modes intersect at the angular momentum compensation temperature where pure antiferromagnetic spin waves are expected. A field-induced shift of the mode-crossing point from the angular momentum compensation temperature and the gyromagnetic reversal reveal hitherto unrecognized properties of ferrimagnetic dynamics. We also provide a theoretical understanding of our experimental results. Our work demonstrates important aspects of the physics of ferrimagnetic spin waves and opens up the attractive possibility of ferrimagnet-based magnonic devices. Right- and left-handed spin-wave modes are identified in ferrimagnets, and their dynamics are revealed.

The electrical control of antiferromagnetic moments is a key technological goal of antiferromagnet-based spintronics, which promises favourable device characteristics such as ultrafast operation and high-density integration as compared to conventional ferromagnet-based devices. To date, the manipulation of antiferromagnetic moments by electric current has been demonstrated in epitaxial antiferromagnets with broken inversion symmetry or antiferromagnets interfaced with a heavy metal, in which spin-orbit torque (SOT) drives the antiferromagnetic domain wall. Here, we report current-induced manipulation of the exchange bias in IrMn/NiFe bilayers without a heavy metal. We show that the direction of the exchange bias is gradually modulated up to ±22 degrees by an in-plane current, which is independent of the NiFe thickness. This suggests that spin currents arising in the IrMn layer exert SOTs on uncompensated antiferromagnetic moments at the interface which then rotate the antiferromagnetic moments. Furthermore, the memristive features are preserved in sub-micron devices, facilitating nanoscale multi-level antiferromagnetic spintronic devices. Antiferromagnets have great promise for spin-based information processing, offering both high operation speed, and an immunity to stray fields. Here, Kang et al demonstrate electrical manipulation of the exchange-bias, without the need for a heavy metal layer.

Spin-orbit coupling effect in structures with broken inversion symmetry, known as the Rashba effect, facilitates spin-orbit torques (SOTs) in heavy metal/ferromagnet/oxide structures, along with the spin Hall effect. Electric-field control of the Rashba effect is established for semiconductor interfaces, but it is challenging in structures involving metals owing to the screening effect. Here, we report that the Rashba effect in Pt/Co/AlO x structures is laterally modulated by electric voltages, generating out-of-plane SOTs. This enables field-free switching of the perpendicular magnetization and electrical control of the switching polarity. Changing the gate oxide reverses the sign of out-of-plane SOT while maintaining the same sign of voltage-controlled magnetic anisotropy, which confirms the Rashba effect at the Co/oxide interface is a key ingredient of the electric-field modulation. The electrical control of SOT switching polarity in a reversible and non-volatile manner can be utilized for programmable logic operations in spintronic logic-in-memory devices. A major challenge for spin based electronics is the electrical control of magnetization. Here, Kang et al demonstrate how electric field control of the Rashba effect in a Pt/Co/AlOx can enable control of the spin-orbit torque and allow for field free switching of the magnetization.

Chiral spin textures of a ferromagnetic layer in contact to a heavy non-magnetic metal, such as Néel-type domain walls and skyrmions, have been studied intensively because of their potential for future nanomagnetic devices. The Dyzaloshinskii–Moriya interaction (DMI) is an essential phenomenon for the formation of such chiral spin textures. In spite of recent theoretical progress aiming at understanding the microscopic origin of the DMI, an experimental investigation unravelling the physics at stake is still required. Here we experimentally demonstrate the close correlation of the DMI with the anisotropy of the orbital magnetic moment and with the magnetic dipole moment of the ferromagnetic metal in addition to Heisenberg exchange. The density functional theory and the tight-binding model calculations reveal that inversion symmetry breaking with spin–orbit coupling gives rise to the orbital-related correlation. Our study provides the experimental connection between the orbital physics and the spin–orbit-related phenomena, such as DMI. Dzyaloshinskii–Moriya interaction (DMI) is one of the key factors to control the chiral spin textures in spintronic applications. Here the authors demonstrate the correlation of the DMI with the anisotropy of the orbital magnetic moment and magnetic dipole moment in Pt/Co/MgO ultrathin trilayers.

Magnetic and spintronic media have offered fundamental scientific subjects and technological applications. Magneto-optic Kerr effect (MOKE) microscopy provides the most accessible platform to study the dynamics of spins, magnetic quasi-particles, and domain walls. However, in the research of nanoscale spin textures and state-of-the-art spintronic devices, optical techniques are generally restricted by the extremely weak magneto-optical activity and diffraction limit. Highly sophisticated, expensive electron microscopy and scanning probe methods thus have come to the forefront. Here, we show that extreme anti-reflection (EAR) dramatically improves the performance and functionality of MOKE microscopy. For 1-nm-thin Co film, we demonstrate a Kerr amplitude as large as 20° and magnetic domain imaging visibility of 0.47. Especially, EAR-enhanced MOKE microscopy enables real-time detection and statistical analysis of sub-wavelength magnetic domain reversals. Furthermore, we exploit enhanced magneto-optic birefringence and demonstrate analyser-free MOKE microscopy. The EAR technique is promising for optical investigations and applications of nanomagnetic systems. Magneto-optic Kerr effect microscopy is useful for dynamic magnetic studies, but is limited by the weak magneto-optical activity. Here, the authors show that extreme anti-reflection result in a Kerr amplitude as large as 20° and enables real-time detection of sub-wavelength magnetic domain reversals.

Spin Hall nano-oscillators (SHNOs) exploiting current-driven magnetization auto-oscillation have recently received much attention because of their potential for neuromorphic computing. Widespread applications of neuromorphic devices with SHNOs require an energy-efficient method of tuning oscillation frequency over broad ranges and storing trained frequencies in SHNOs without the need for additional memory circuitry. While the voltage-driven frequency tuning of SHNOs has been demonstrated, it was volatile and limited to megahertz ranges. Here, we show that the frequency of SHNOs is controlled up to 2.1 GHz by an electric field of 1.25 MV/cm. The large frequency tuning is attributed to the voltage-controlled magnetic anisotropy (VCMA) in a perpendicularly magnetized Ta/Pt/[Co/Ni] n /Co/AlO x structure. Moreover, the non-volatile VCMA effect enables cumulative control of the frequency using repetitive voltage pulses which mimic the potentiation and depression functions of biological synapses. Our results suggest that the voltage-driven frequency tuning of SHNOs facilitates the development of energy-efficient neuromorphic devices. Spin-hall nano-oscillators are a variation on spin-torque nano-oscillators, where the spin-Hall effect is used to drive oscillations, however past examples have had limited frequency tunability. Here, Choi et al demonstrate spin-hall oscillators with wide voltage controlled frequency tunability.

Precise control of magnetic domain wall (DW) motion is crucial for DW-based spintronic devices. To date, artificially designed DW pinning sites, such as notch structures, have been used to precisely control the DW position. However, the existing DW pinning methods are not reconfigurable because they cannot change the position of pinning site after being fabricated. Herein, a novel method for attaining reconfigurable DW pinning is proposed, which relies on the dipolar interactions between two DWs located in different magnetic layers. Repulsion between DWs in both layers was observed, indicating that one of the DWs acts as a pinning barrier for the other. Because the DW is mobile in the wire, the position of pinning can be modulated, thereby resulting in reconfigurable pinning that was experimentally demonstrated for current-driven DW motion. These findings provide additional controllability of DW motion, which may expand the functionality of DW-based devices to broader spintronic applications.