Explore the vast range of titles available.

Enzymatic cleavage of glycocidic bonds is an important, green and biocompatible means to refine lignocellulosic biomass. Here, the effect of the resulting oxidation point defects on the structural and water interactions of crystalline cellulose 100 surface are explored using classical molecular dynamics simulations. We show that even single oxidations reduce the connections within cellulose crystal significantly, mostly via local interactions between the chains along the surface plane but also via the oxidation defects changing the structure of the crystal in direction perpendicular to the surface. Hydrogen bonding on the surface plane of cellulose is analyzed to identify onset of desorption of glucose chains, and the desorption probed. To assess the actual soluble product profile and their fractions resulting from lytic polysaccharide monooxygenase (LPMO) enzyme oxidation on real cellulose crystal samples, we employ High-Performance Anion-Exchange Chromatography with Pulsed Amperometric-Detection (HPAEC-PAD) technique. The findings demonstrate the LPMO oxidation results in soluble glucose fragments ranging from 2 to 8 glucose units in length. Additionally, significantly more oxidized oligosaccharides were released in LPMO treatment of AaltoCell than Avicel, the two studied microcrystalline cellulose species. This is likely to result from the large reactive surface area preserved in AaltoCell due to manufacturing process. Furthermore, as can be expected, the oxidation defects at the surfaces lead to the surfaces binding a larger amount of water both via direct influence by the defect but also the defect induced protrusions and fluctuations of the glucose chain. We quantify the enhancement of water interactions of cellulose crystals due to the oxidation defects, even when no desorption takes place. The molecular simulations indicate that the effect is most pronounced for the C1-acid oxidation (carboxylic acid formation) but present also for the other defects resulting from oxidation. The findings bear significance in understanding the effects of enzymatic oxidation on cellulose nanocrystals, the difference between cellulose species, and cleavage of soluble products from the cellulosic material.

A deeper mechanistic understanding of the saccharification of cellulosic biomass could enhance the efficiency of biofuels development. We report here the real-time visualization of crystalline cellulose degradation by individual cellulase enzymes through use of an advanced version of high-speed atomic force microscopy. Trichoderma reesei cellobiohydrolase I (TrCel7A) molecules were observed to slide unidirectionally along the crystalline cellulose surface but at one point exhibited collective halting analogous to a traffic jam. Changing the crystalline polymorphic form of cellulose by means of an ammonia treatment increased the apparent number of accessible lanes on the crystalline surface and consequently the number of moving cellulase molecules. Treatment of this bulky crystalline cellulose simultaneously or separately with T. reesei cellobiohydrolase II (TrCel6A) resulted in a remarkable increase in the proportion of mobile enzyme molecules on the surface. Cellulose was completely degraded by the synergistic action between the two enzymes.

The Ilv/ED dehydratase protein family includes dihydroxy acid-, gluconate-, 6-phosphogluconate- and pentonate dehydratases. The members of this family are involved in various biosynthetic and carbohydrate metabolic pathways. Here, we describe the first crystal structure of D-xylonate dehydratase from Caulobacter crescentus ( Cc XyDHT) at 2.7 Å resolution and compare it with other available enzyme structures from the IlvD/EDD protein family. The quaternary structure of Cc XyDHT is a tetramer, and each monomer is composed of two domains in which the N-terminal domain forms a binding site for a [2Fe-2S] cluster and a Mg 2+ ion. The active site is located at the monomer-monomer interface and contains residues from both the N-terminal recognition helix and the C-terminus of the dimeric counterpart. The active site also contains a conserved Ser490, which probably acts as a base in catalysis. Importantly, the cysteines that participate in the binding and formation of the [2Fe-2S] cluster are not all conserved within the Ilv/ED dehydratase family, which suggests that some members of the IlvD/EDD family may bind different types of [Fe-S] clusters.

BackgroundThe main technological impediment to widespread utilization of lignocellulose for the production of fuels and chemicals is the lack of low-cost technologies to overcome its recalcitrance. Organisms that hydrolyze lignocellulose and produce a valuable product such as ethanol at a high rate and titer could significantly reduce the costs of biomass conversion technologies, and will allow separate conversion steps to be combined in a consolidated bioprocess (CBP). Development of Saccharomyces cerevisiae for CBP requires the high level secretion of cellulases, particularly cellobiohydrolases.ResultsWe expressed various cellobiohydrolases to identify enzymes that were efficiently secreted by S. cerevisiae. For enhanced cellulose hydrolysis, we engineered bimodular derivatives of a well secreted enzyme that naturally lacks the carbohydrate-binding module, and constructed strains expressing combinations of cbh1 and cbh2 genes. Though there was significant variability in the enzyme levels produced, up to approximately 0.3 g/L CBH1 and approximately 1 g/L CBH2 could be produced in high cell density fermentations. Furthermore, we could show activation of the unfolded protein response as a result of cellobiohydrolase production. Finally, we report fermentation of microcrystalline cellulose (Avicel™) to ethanol by CBH-producing S. cerevisiae strains with the addition of beta-glucosidase.ConclusionsGene or protein specific features and compatibility with the host are important for efficient cellobiohydrolase secretion in yeast. The present work demonstrated that production of both CBH1 and CBH2 could be improved to levels where the barrier to CBH sufficiency in the hydrolysis of cellulose was overcome.

Platform chemicals and polymer precursors can be produced via enzymatic pathways starting from lignocellulosic waste materials. The hemicellulose fraction of lignocellulose contains aldopentose sugars, such as d -xylose and l -arabinose, which can be enzymatically converted into various biobased products by microbial non-phosphorylated oxidative pathways. The Weimberg and Dahms pathways convert pentose sugars into α-ketoglutarate, or pyruvate and glycolaldehyde, respectively, which then serve as precursors for further conversion into a wide range of industrial products. In this review, we summarize the known three-dimensional structures of the enzymes involved in oxidative non-phosphorylative pathways of pentose catabolism. Key structural features and reaction mechanisms of a diverse set of enzymes responsible for the catalytic steps in the reactions are analysed and discussed.

Background Microbial expansins (EXLXs) are non-lytic proteins homologous to plant expansins involved in plant cell wall formation. Due to their non-lytic cell wall loosening properties and potential to disaggregate cellulosic structures, there is considerable interest in exploring the ability of microbial expansins (EXLX) to assist the processing of cellulosic biomass for broader biotechnological applications. Herein, EXLXs with different modular structure and from diverse phylogenetic origin were compared in terms of ability to bind cellulosic, xylosic, and chitinous substrates, to structurally modify cellulosic fibrils, and to boost enzymatic deconstruction of hardwood pulp. Results Five heterogeneously produced EXLXs ( Clavibacter michiganensis; Cmi EXLX2, Dickeya aquatica; Daq EXLX1, Xanthomonas sacchari; Xsa EXLX1, Nothophytophthora sp.; Nsp EXLX1 and Phytophthora cactorum; Pca EXLX1) were shown to bind xylan and hardwood pulp at pH 5.5 and Cmi EXLX2 (harboring a family-2 carbohydrate-binding module) also bound well to crystalline cellulose. Small-angle X-ray scattering revealed a 20–25% increase in interfibrillar distance between neighboring cellulose microfibrils following treatment with Cmi EXLX2, Daq EXLX1, or Nsp EXLX1. Correspondingly, combining xylanase with Cmi EXLX2 and Daq EXLX1 increased product yield from hardwood pulp by ~ 25%, while supplementing the Tr AA9A LPMO from Trichoderma reesei with Cmi EXLX2, Daq EXLX1, and Nsp EXLX1 increased total product yield by over 35%. Conclusion This direct comparison of diverse EXLXs revealed consistent impacts on interfibrillar spacing of cellulose microfibers and performance of carbohydrate-active enzymes predicted to act on fiber surfaces. These findings uncover new possibilities to employ EXLXs in the creation of value-added materials from cellulosic biomass.

Xylanases are in important class of industrial enzymes that are essential for the complete hydrolysis of lignocellulosic biomass into fermentable sugars. In the present study, we report the cloning of novel xylanases with interesting properties from compost metagenomics libraries. Controlled composting of lignocellulosic materials was used to enrich the microbial population in lignocellulolytic organisms. DNA extracted from the compost samples was used to construct metagenomics libraries, which were screened for xylanase activity. In total, 40 clones exhibiting xylanase activity were identified and the thermostability of the discovered xylanases was assayed directly from the library clones. Five genes, including one belonging to the more rare family GH8, were selected for subcloning and the enzymes were expressed in recombinant form in E. coli. Preliminary characterization of the metagenome-derived xylanases revealed interesting properties of the novel enzymes, such as high thermostability and specific activity, and differences in hydrolysis profiles. One enzyme was found to perform better than a standard Trichoderma reesei xylanase in the hydrolysis of lignocellulose at elevated temperatures.

The oxidative d-xylose pathway, i.e. Dahms pathway, can be utilised to produce from cheap biomass raw material useful chemical intermediates. In vitro metabolic pathways offer a fast way to study the rate-limiting steps and find the most suitable enzymes for each reaction. We have constructed here in vitro multi-enzyme cascades leading from d-xylose or d-xylonolactone to ethylene glycol, glycolic acid and lactic acid, and use simple spectrophotometric assays for the read-out of the efficiency of these pathways. Based on our earlier results, we focussed particularly on the less studied xylonolactone ring opening (hydrolysis) reaction. The bacterial Caulobacter crescentus lactonase (Cc XylC), was shown to be a metal-dependent enzyme clearly improving the formation of d-xylonic acid at pH range from 6 to 8. The following dehydration reaction by the ILVD/EDD family d-xylonate dehydratase is a rate-limiting step in the pathway, and an effort was made to screen for novel enolase family d-xylonate dehydratases, however, no suitable replacing enzymes were found for this reaction. Concerning the oxidation of glycolaldehyde to glycolic acid, several enzyme candidates were also tested. Both Escherichia coli aldehyde dehydrogenase (Ec AldA) and Azospirillum brasilense α-ketoglutarate semialdehyde dehydrogenase (Ab AraE) proved to be suitable enzymes for this reaction.

There are at least three different pathways for the catabolism of d-galacturonate in microorganisms. In the oxidative pathway, which was described in some prokaryotic species, d-galacturonate is first oxidised to meso-galactarate (mucate) by a nicotinamide adenine dinucleotide (NAD)-dependent dehydrogenase (EC 1.1.1.203). In the following steps of the pathway mucate is converted to 2-keto-glutarate. The enzyme activities of this catabolic pathway have been described while the corresponding gene sequences are still unidentified. The d-galacturonate dehydrogenase was purified from Agrobacterium tumefaciens, and the mass of its tryptic peptides was determined using MALDI-TOF mass spectrometry. This enabled the identification of the corresponding gene udh. It codes for a protein with 267 amino acids having homology to the protein family of NAD(P)-binding Rossmann-fold proteins. The open reading frame was functionally expressed in Saccharomyces cerevisiae. The N-terminally tagged protein was not compromised in its activity and was used after purification for a kinetic characterization. The enzyme was specific for NAD and accepted d-galacturonic acid and d-glucuronic acid as substrates with similar affinities. NMR analysis showed that in water solution the substrate d-galacturonic acid is predominantly in pyranosic form which is converted by the enzyme to 1,4 lactone of galactaric acid. This lactone seems stable under intracellular conditions and does not spontaneously open to the linear meso-galactaric acid.

Two different types of approach were taken to improve the hydrolytic activity towards crystalline cellulose at elevated temperatures of Melanocarpus albomyces Cel7B ( Ma Cel7B), a single-module GH-7 family cellobiohydrolase. Structure-guided protein engineering was used to introduce an additional tenth disulphide bridge to the Ma Cel7B catalytic module. In addition, a fusion protein was constructed by linking a cellulose-binding module (CBM) and a linker from the Trichoderma reesei Cel7A to the C terminus of Ma Cel7B. Both approaches proved successful. The disulphide bridge mutation G4C/M70C located near the N terminus, close to the entrance of the active site tunnel of Ma Cel7B, led to improved thermostability (Δ T m  = 2.5°C). By adding the earlier found thermostability-increasing mutation S290T (Δ T m  = 1.5°C) together with the disulphide bridge mutation, the unfolding temperature was increased by 4°C (mutant G4C/M70C/S290T) compared to that of the wild-type enzyme, thus showing an additive effect on thermostability. Both disulphide mutants had increased activity towards microcrystalline cellulose (Avicel) at 75°C, apparently solely because of their improved thermostability. The addition of a CBM also improved the thermostability (Δ T m  = 2.5°C) and caused a clear (sevenfold) increase in the hydrolysis activity of Ma Cel7B towards Avicel at 70°C.