Explore the vast range of titles available.

Polymer tribology is a fast growing area owing to increasing applications of polymers and polymer composites in industry, transportation, and many other areas of economy. Surface forces are very important for polymer contact, but the real origin of such forces has not been fully investigated. Strong adhesive interaction between polymers leads to an increase in the friction force, and hence, the asperities of the material may be removed to form wear particles or transfer layers on the counterface. The theory of polymer adhesion has not been completely elucidated yet and several models of adhesion have been proposed from the physical or chemical standpoints. This paper is focused on the research efforts on polymer adhesion with emphasis on adhesion mechanisms, which are very important in the analysis of polymer friction and wear.

Coevolution of male and female genitalia is widespread in animals. Nevertheless, few studies have examined the mechanics of genital interactions during mating. We characterized the mechanical properties of the elongated female genitalia, the spermathecal duct, of the small cassidine beetle, Cassida rubiginosa . The data were compared with the mechanical properties of the elongated male genitalia, the flagellum. We analysed the material distributions of the spermathecal duct using a microscopy technique, established a tensile test setup under a light microscope and conducted tensile tests. Diameter and tensile stiffness gradients were present along the spermathecal duct, but its Young's modulus and material distribution were more or less homogeneous. The results confirmed the hypothesis based on numerical simulations that the spermathecal duct is more rigid than the flagellum. In the study species, the penile penetration force is simply applied to the base of the hyper-elongated flagellum and conveyed along the flagellum to its tip. Considering this simple penetration mechanism, the relatively low flexibility of the spermathecal duct, compared to the flagellum, is likely to be essential for effective penetration of the flagellum.

Many insect species reversibly adhere to surfaces by combining contact splitting (contact formation via fibrillar contact elements) and wet adhesion (supply of liquid secretion via pores in the insects’ feet). Here, we fabricate insect-inspired fibrillar pads for wet adhesion containing continuous pore systems through which liquid is supplied to the contact interfaces. Synergistic interaction of capillarity and humidity-induced pad softening increases the pull-off force and the work of adhesion by two orders of magnitude. This increase and the independence of pull-off force on the applied load are caused by the capillarity-supported formation of solid–solid contact between pad and the surface. Solid–solid contact dominates adhesion at high humidity and capillarity at low humidity. At low humidity, the work of adhesion strongly depends on the amount of liquid deposited on the surface and, therefore, on contact duration. These results may pave the way for the design of insect-inspired adhesive pads. Many insects supply secretion via small tubes or pores to the end of their legs to be able to attach to a surface. Here, inspired by nature, Xue et al. fabricate adhesive pads with porous nanorod structure for oil delivery, which give rise to a 100-fold increase in adhesivity under humid conditions.

The black soldier fly (BSF) Hermetia illucens (Diptera: Stratiomyidae) plays a significant role at the larval stage in the circular economy due to its ability to convert organic waste into valuable products for energy, food, feed, and agricultural applications. Many data are available on larval development and biomass generation, but basic research on this species is lacking and little is known about adult biology, in particular about the cues involved in sexual recognition. In the present study, using various instruments (stereomicroscope, scanning and transmission electron microscope, hyperspectral camera and spectrophotometer), wing ultrastructure of both sexes was analysed, reflectance and transmission spectra of the wings were measured and behavioural bioassays were carried out to measure male response to specific visual stimuli. The collected data showed the existence of sexual dimorphism in the wings of H. illucens due to iridescent structural colouration generated by a multilayer of melanin located in the dorsal lamina of the central part of the wing. Wing sexual dimorphism is particularly evident regarding the strong emission of blue light of female wings. Blue colour induces in males a strong motivation to mate. The obtained results can help to improve and optimize the breeding techniques of BSF.

The jumping mechanism with supporting morphology and kinematics is described in the marsh beetle Scirtes hemisphaericus (Coleoptera: Scirtidae). In marsh beetles, the jump is performed by the hind legs by the rapid extension of the hind tibia. The kinematic parameters of the jump are: 139–1536 m s −2 (acceleration), 0.4–1.9 m s −1 (velocity), 2.7–8.4 ms (time to take-off), 0.2–5.4 × 10 –6  J (kinetic energy) and 14–156 (g-force). The power output of a jumping leg during the jumping movement is 3.5 × 10 3 to 9.6 × 10 3  W kg −1 . A resilin-bearing elastic extensor ligament is considered to be the structure that accumulates the elastic strain energy. The functional model of the jumping involving an active latching mechanism is proposed. The latching mechanism is represented by the conical projection of the tibial flexor sclerite inserted into the corresponding socket of the tibial base. Unlocking is triggered by the contraction of flexor muscle pulling the tibial flexor sclerite backwards which in turn comes out of the socket. According to the kinematic parameters, the time of full extension of the hind tibia, and the value of the jumping leg power output, this jumping mechanism is supposed to be latch-mediated spring actuation using the contribution of elastically stored strain energy.

Seed and fruit mucilage is composed of three types of polysaccharides—pectins, cellulose, and hemicelluloses—and demonstrates adhesive properties after hydration. One of the important functions of the mucilage is to enable seeds to attach to diverse natural surfaces. Due to its adhesive properties, which increase during dehydration, the diaspore can be anchored to the substrate (soil) or attached to an animal’s body and dispersed over varied distances. After complete desiccation, the mucilage envelope forms a thin transparent layer around the diaspore creating a strong bond to the substrate. In the present study, we examined the mucilaginous seeds of six different plant taxa (from genera Linum, Lepidium, Ocimum, Salvia and Plantago) and addressed two main questions: (1) How strong is the adhesive bond of the dried mucilage envelope? and (2) What are the differences in adhesion between different mucilage types? Generally, the dried mucilage envelope revealed strong adhesive properties. Some differences between mucilage types were observed, particularly in relation to adhesive force (Fad) whose maximal values varied from 0.58 to 6.22 N. The highest adhesion force was revealed in the cellulose mucilage of Ocimum basilicum. However, mucilage lacking cellulose fibrils, such as that of Plantago ovata, also demonstrated high values of adhesion force with a maximum close to 5.74 N. The adhesion strength, calculated as force per unit contact area (Fad/A0), was comparable between studied taxa. Obtained results demonstrated (1) that the strength of mucilage adhesive bonds strongly surpasses the requirements necessary for epizoochory and (2) that seed mucilage has a high potential as a nontoxic, natural substance that can be used in water-based glues.

Since the ventral body side of snakes is in almost continuous contact with the substrate during undulating locomotion, their skin is presumably adapted to generate high friction for propulsion and low friction to slide along the substrate. In this study, the microstructure of ventral scales was analyzed using scanning electron microscopy, atomic force microscope and confocal laser scanning microscopy. Dynamic friction was investigated by a microtribometer. The ventral scales demonstrated anisotropic frictional properties. To analyze the role of the stiffness of underlying layers on the frictional anisotropy, two different types of scale cushioning (hard and soft) were tested. To estimate frictional forces of the skin surface on rough substrates, additional measurements with a rough surface were performed. Frictional anisotropy for both types of scale cushioning and rough surfaces was revealed. However, for both types of surface roughness, the anisotropy was stronger expressed in the soft-cushioned sample. This effect could be caused by (1) the stronger interaction of the microstructure with the substrate in soft-cushioned samples due to larger real contact area with the substrate and (2) the composite character of the skin of this snake species with embedded, highly ordered fiber-like structures, which may cause anisotropy in material properties.

In the presented work, the influence of parameters such as the total flow rate of phases, the ratio of flow rates, and residence time on mass transfer during the two-phase flow of immiscible liquids in a T-shaped microchannel was investigated using the micro-LIF technique. The study focused on the plug flow regime, where a 70% water–glycerol solution was used as the dispersed phase, and tri-n-butyl phosphate (TBP) was used as the carrier phase. We determined the transition boundary between the dispersed and parallel flow patterns and calculated the plug length and velocities to develop a mass transfer model. Furthermore, we measured the partition coefficient for the set of liquids used in the experiments and analyzed the concentration fields inside the slugs of the continuous phase at various distances downstream of the T-junction. Using the obtained data, we determined the extraction efficiency and overall volumetric mass transfer coefficient and established dependencies demonstrating the effect of the flow-rate ratio, total flow rate, and the residence time on mass transfer rate and extraction efficiency. Finally, we developed a model for the overall volumetric mass transfer coefficient corresponding to the set of liquids used with an R-squared value of 0.966.

Tribological properties of femoro-tibial leg joints in two beetles, darkling beetle Zophobas morio and Congo rose chafer Pachnoda marginata were studied. Very low friction of 0.004 was revealed by the direct measurements in the joint. It is assumed that semi-solid lubricant functioning as in technical bearings is one of the leading factors of the friction minimization. Dependence of the surface texture and physical chemical properties (hydrophobicity) on the cuticle friction was analysed. Contribution of the surface texture to the tribological properties of contacting surfaces was examined by the measurement in the tribosystem “contacting surface/glass”. It is supposed that coefficient of friction (COF) decreases with decrease of surface roughness. At the same time, no statistically significant correlation was found between the hydrophobicity of the surface and the value of the friction coefficient.

Colors of crystals, pigments, metals, salt solutions and bioluminescence occur in nature due to the optical properties of electrons in atoms and molecules. However, colors can also result from interference effects on nanostructures. In contrast to artificial coloration, which are caused by well-defined regular structures, the structural colors of living organisms are often more intense and almost angle-independent. In this paper, we report the successful manufacturing of a lamellar nanostructure that mimics the ridge shape of the Morpho butterfly using a 3d-direct laser writing technique. The viewing angle dependency of the color was analyzed via a spectrometer and the structure was visualized using a scanning electron microscope. The generated nano- and micro-structures and their optical properties were comparable to those observed in the Morpho butterfly.