Explore the vast range of titles available.

Wood is a complex tissue that fulfills three major functions in trees: water conduction, mechanical support and nutrient storage. In Angiosperm trees, vessels, fibers and parenchyma rays are respectively assigned to these functions. Cell wall composition and structure strongly varies according to cell type, developmental stages and environmental conditions. This complexity can therefore hinder the study of the molecular mechanisms of wood formation, underlying the construction of its properties. However, this can be circumvented thanks to the development of cell-specific approaches and microphenotyping. Here, we present a non-destructive microphenotyping method based on attenuated total reflectance-Fourier transformed infrared (ATR-FTIR) microspectroscopy. We applied this technique to three types of poplar wood: normal wood of staked trees (NW), tension and opposite wood of artificially tilted trees (TW, OW). TW is produced by angiosperm trees in response to mechanical strains and is characterized by the presence of G fibers, exhibiting a thick gelatinous extra-layer, named G-layer, located in place of the usual S2 and/or S3 layers. By contrast, OW located on the opposite side of the trunk is totally deprived of fibers with G-layers. We developed a workflow for hyperspectral image analysis with both automatic pixel clustering according to cell wall types and identification of differentially absorbed wavenumbers (DAWNs). As pixel clustering failed to assign pixels to ray S-layers with sufficient efficiency, the IR profiling and identification of DAWNs were restricted to fiber and vessel cell walls. As reported elsewhere, this workflow identified cellulose as the main component of the G-layers, while the amount in acetylated xylans and lignins were shown to be reduced. These results validate ATR-FTIR technique for characterization of G layers. In addition, this study brought new information about IR profiling of S-layers in TW, OW and NW. While OW and NW exhibited similar profiles, TW fibers S-layers combined characteristics of TW G-layers and of regular fiber S-layers. Unexpectedly, vessel S-layers of the three kinds of wood showed significant differences in IR profiling. In conclusion, ATR-FTIR microspectroscopy offers new possibilities for studying cell wall composition at the cell level.

In insects, the gall-inducing life-style has evolved independently many times. Several evolutionary pathways leading to this lifestyle have been proposed. While there is compelling evidence supporting surface-feeders and stem-borers as ancestral states of insect gall-inducers, an evolutionary pathway from leaf-miners remains hypothetical. Here we explored this question by comparing the developmental processes of two micromoths, a gall-inducer Caloptilia cecidophora (Lep., Gracillariidae), and its non-gall-inducing relative C. ryukyuensis. Like other Caloptilia, the first and second instars of C. cecidophora are leaf-miners and the gall is initiated inside the leaf mine by the third instar, thus suggesting leaf-mining as an ancestral, plesiomorphic state in this case. This is the first example of an insect species switching from leaf-mining to gall-inducing during larval development. The first two leaf-mining instars of C. cecidophora exhibit an absence of growth and a reduced time duration compared to C. ryukyuensis. The shortening of the duration of leaf-mining stages is apparently compensated in C. cecidophora by a larger egg size than C. ryukyuensis, and an additional larval instar during the gall phase.

Xylem resistance to drought-induced cavitation is a key trait of plant water relations. This study assesses the genetic variation expressed for stem cavitation resistance within a population of a riparian species, the European black poplar (Populus nigra L.), and explores its relationships with xylem anatomy, water-use efficiency (WUE), and growth. Sixteen structural and physiological traits related to cavitation resistance, xylem anatomy, growth, bud phenology, and WUE were measured on 33 P. nigra genotypes grown under optimal irrigation in a 2-year-old clonal experiment in a nursery. Significant genetic variation was expressed for the xylem tension inducing 50% loss of hydraulic conductivity (Ψ50) within the studied population, as attested by the high value of broad-sense heritability estimated for this trait (H 2 ind = 0.72). Stem cavitation resistance was associated with xylem structure: the more cavitation-resistant genotypes exhibited lower hydraulic efficiency and higher mechanical reinforcement as assessed from stem xylem cross sections. By contrast, Ψ50 was not significantly related to shoot height increment, total above-ground dry mass, or bulk leaf carbon isotope discrimination, a proxy for intrinsic WUE. These findings indicate that the trade-offs between xylem resistance to cavitation, hydraulic efficiency, and mechanical reinforcement can occur at the within-population level. Given that the studied genotypes were exposed to the same environmental conditions and evolutionary drivers in situ, the trade-offs detected at this scale are expected to reflect true functional relationships.

• Fifteen poplar cDNA encoding fasciclin-like arabinogalactan proteins (PopFLAs) were finely characterized, whereas the presence of arabinogalactan proteins (AGPs) was globally assessed during wood formation. • PopFLAs transcript accumulation was analysed through EST distribution in cDNA libraries, semi-quantitative RT-PCR, microarray experiment and Northern blot analysis. Similarly, AGPs contents were globally quantified by rocket electrophoresis. AGPs accumulation was further examined by Western blotting and immunocytolocalization. • Ten PopFLAs were specifically expressed in tension wood (TW) and not expressed in the cambial zone. Rocket electrophoresis revealed important AGPs accumulation in TW xylem. An anti-AGPs specific antibody recognized two proteins preferentially present in the cell wall-bound fraction from TW. Immunocytochemistry revealed a strong labelling close to the inner part of the G-layer of TW fibres. • PopFLAs are expressed in xylem and many are up-regulated in TW. It is suggested that some PopFLAs accumulating at the inner side of the G-layer may have a specific function in the building of this layer. PopFLAs expression may therefore be linked to the specific mechanical properties of TW.

Wood is a complex and highly variable tissue, the formation of which is developmentally and environmentally regulated. In reaction to gravitropic stimuli, angiosperm trees differentiate tension wood, a wood with specific anatomical, chemical and mechanical features. In poplar the most significant of these features is an additional layer that forms in the secondary wall of tension wood fibres. This layer is mainly constituted of cellulose microfibrils oriented nearly parallel to the fibre axis. Tension wood formation can be induced easily and strongly by bending the stem of a tree. Located at the upper side of the bent stem, tension wood can be compared with the wood located on its lower side. Therefore tension wood represents an excellent model for studying the formation of xylem cell walls. This review summarizes results recently obtained in the field of genomics on tension wood. In addition, we present an example of how the application of functional genomics to tension wood can help decipher the molecular mechanisms responsible for cell wall characteristics such as the orientation of cellulose microfibrils.

Objective Black poplar ( Populus nigra L.) is a species native to Eurasia with a wide distribution area. It is an ecologically important species from riparian ecosystems, that is used as a parent of interspecific ( P. deltoides x P. nigra ) cultivated poplar hybrids. Variant detection from transcriptomics sequences of 241 P. nigra individuals, sampled in natural populations from 11 river catchments (in four European countries) is described here. These data provide new valuable resources for population structure analysis, population genomics and genome-wide association studies. Data description We generated transcriptomics data from a mixture of young differentiating xylem and cambium tissues of 480 Populus nigra trees sampled in a common garden experiment located at Orléans (France), corresponding to 241 genotypes (2 clonal replicates per genotype, at maximum) by using RNAseq technology. We launched on the resulting sequences an in-silico pipeline that allowed us to obtain 878,957 biallelic polymorphisms without missing data. More than 99% of these positions are annotated and 98.8% are located on the 19 chromosomes of the P. trichocarpa reference genome. The raw RNAseq sequences are available at the NCBI Sequence Read Archive SPR188754 and the variant dataset at the Recherche Data Gouv repository under https://doi.org/10.15454/8DQXK5 .

Until recently, the roles of plant MADS-box genes have mainly been characterized during inflorescence and flower differentiation. In order to precise the roles of AGAMOUS-LIKE 12, one of the few MADS-box genes preferentially expressed in roots, we placed its cDNA under the control of the double 35S CaMV promoter to produce transgenic walnut tree and Arabidopsis plants. In Juglans sp., transgenic somatic embryos showed significantly higher germination rates but abnormal development of their shoot apex prevented their conversion into plants. In addition, a wide range of developmental abnormalities corresponding to ectopic root-like structures affected the transgenic lines suggesting partial reorientations of the embryonic program toward root differentiation. In Arabidopsis, AtAGL12 overexpression lead to the production of faster growing plants presenting dramatically wider and shorter root phenotypes linked to increased meristematic cell numbers within the root apex. In the upper part of the roots, abnormal cell divisions patterns within the pericycle layer generated large ectopic cell masses that did not prevent plants to grow. Taken together, our results confirm in both species that AGL12 positively regulates root meristem cell division and promotes overall root vascular tissue formation. Genetic engineering of AGL12 expression levels could be useful to modulate root architecture and development.

Phloeomyzus passerinii can induce a pseudogall within the bark of susceptible poplar genotypes, while in resistant genotypes the induction seems to be impeded by lignification processes. Phloeomyzus passerinii is a major pest of poplar stands in Europe, North Africa and the Near East. This aphid feeds in the cortical parenchyma of different poplar species and hybrids, and can affect their growth and survival through unknown mechanisms. In some genotypes, however, resistance prevents either the settlement or the development of aphid colonies. For a better understanding of tree reactions to aphid probing, we compared the anatomical and biochemical modifications undergone within the bark of stem cuttings, after different delays of either aphid colonization or mechanical wounding. To assess how resistance may modulate tree reactions, the comparison was performed using three poplar genotypes exhibiting different resistance levels. In these three genotypes, mechanical wounding induced a similar, localized, wound periderm. In contrast, aphid colonization triggered more extended reactions, which differed among genotypes. In the susceptible genotype, aphids induced a reaction tissue, characterized after a month by thin-walled hypertrophied cells and a depletion of soluble phenolic compounds and starch. Anatomical features of this reaction tissue suggest that the aphid initiates a pseudogall in the cortical tissues of its susceptible host. In the resistant genotypes, however, the differentiation of the reaction tissue was totally or partially inhibited, probably because of extended lignification processes. The implications of a pseudogall induction on susceptible hosts' physiology, and the impact of lignification on aphid development and behavior, are discussed.

RG-I and AGP, but not XG, are associated to the building of the peculiar mechanical properties of tension wood.Hardwood trees produce tension wood (TW) with specific mechanical properties to cope with environmental cues. Poplar TW fibers have an additional cell wall layer, the G-layer responsible for TW mechanical properties. We investigated, in two poplar hybrid species, the molecules potentially involved in the building of TW mechanical properties. First, we evaluated the distribution of the different classes of non-cellulosic polysaccharides during xylem fiber differentiation, using immunolocalization. In parallel, G-layers were isolated and their polysaccharide composition determined. These complementary approaches provided information on the occurrence of non-cellulosic polysaccharides during G-fiber differentiation. We found no evidence of the presence of xyloglucan (XG) in poplar G-layers, whereas arabinogalactan proteins (AGP) and rhamnogalacturonan type I pectins (RG-I) were abundant, with an apparent progressive loss of RG-I side chains during G-layer maturation. Similarly, the intensity of immunolabeling signals specific for glucomannans and glucuronoxylans varies during G-layer maturation. RG-I and AGP are best candidate matrix components to be responsible for TW mechanical properties.

In the search for renewable energy sources, genetic engineering is a promising strategy to improve plant cell wall composition for biofuel and bioproducts generation. Lignin is a major factor determining saccharification efficiency and, therefore, is a prime target to engineer. Here, lignin content and composition were modified in poplar (Populus tremula 3 Populus alba) by specifically down-regulating CINNAMYL ALCOHOL DEHYDROGENASE1 (CAD1) by a hairpin-RNA-mediated silencing approach, which resulted in only 5% residual CAD1 transcript abundance. These transgenic lines showed no biomass penalty despite a 10% reduction in Klason lignin content and severe shifts in lignin composition. Nuclear magnetic resonance spectroscopy and thioacidolysis revealed a strong increase (up to 20-fold) in sinapaldehyde incorporation into lignin, whereas coniferaldehyde was not increased markedly. Accordingly, ultra-high-performance liquid chromatography-mass spectrometry-based phenolic profiling revealed a more than 24,000-fold accumulation of a newly identified compound made from 8-8 coupling of two sinapaldehyde radicals. However, no additional cinnamaldehyde coupling products could be detected in the CAD1-deficient poplars. Instead, the transgenic lines accumulated a range of hydroxycinnamate-derived metabolites, of which the most prominent accumulation (over 8,500-fold) was observed for a compound that was identified by purification and nuclear magnetic resonance as syringyl lactic acid hexoside. Our data suggest that, upon down-regulation of CAD1, coniferaldehyde is converted into ferulic acid and derivatives, whereas sinapaldehyde is either oxidatively coupled into S'(8-8) S' and lignin or converted to sinapic acid and derivatives. The most prominent sink of the increased flux to hydroxycinnamates is syringyl lactic acid hexoside. Furthermore, low-extent saccharification assays, under different pretreatment conditions, showed strongly increased glucose (up to +81%) and xylose (up to +153%) release, suggesting that down-regulating CAD1 is a promising strategy for improving lignocellulosic biomass for the sugar platform industry.