Explore the vast range of titles available.

Biobank governance is about the regulation of the relationship between individual citizens, society and biobanks. Its key agenda is to link society, citizens and biobanks with respect to issues of consent, privacy, ownership, access and benefit sharing. With the transformation of biobank research from local/national activities towards transnational projects and the emergence of post-genomic medical research, biobanks need to establish novel governance structures. We consider governance solutions that focus on 'bioethical-theoretical arguments to be of only limited value in this context. By contrast, we think the key lies in developing participatory arrangements that are responsive to the views of patients and 'lay people , and also operate on a transnational level. The social-political and communicative competence of biobank infrastructures must be improved, thereby assuring the long-term legitimacy and commitment to these often highly expensive projects from a large variety of different stakeholders over the decades.

This task‐force paper documents and summarizes the models of power transformers that have been proposed, used, and validated in the exercise of digital real‐time simulation. Power transformer is one of the most important equipment in power systems, and its modelling for electromagnetic transient simulation has evolved over time, especially in the area of real‐time simulation. The focus of the paper is to document and archive the models that have been well accepted and used for transient analysis in digital real‐time simulation so that readers can use it as a master document for transformer modelling in real‐time simulation studies. It includes both conventional and specialized models of power transformers that have been broadly acknowledged by the power engineering community. The models provided here come with detailed mathematical representation and their implementation techniques. A comparative study is also performed to illustrate the differences in their performances. In the end, an application guideline has been provided to guide the readers to select the appropriate model for their study. This task‐force paper documents and summarizes the models of power transformers that have been proposed, used and validated in the exercise of digital real‐time simulation. The focus of the paper is to document and archive the models that have been well accepted and used for transient analysis in digital real‐time simulation so that readers can use it as a master document for transformer modelling in real‐time simulation studies.

As the landscape of devices that interact with the electrical grid expands, also the complexity of the scenarios that arise from these interactions increases. Validation methods and tools are typically domain specific and are designed to approach mainly component level testing. For this kind of applications, software and hardware-in-the-loop based simulations as well as lab experiments are all tools that allow testing with different degrees of accuracy at various stages in the development life-cycle. However, things are vastly different when analysing the tools and the methodology available for performing system-level validation. Until now there are no available well-defined approaches for testing complex use cases involving components from different domains. Smart grid applications would typically include a relatively large number of physical devices, software components, as well as communication technology, all working hand in hand. This paper explores the possibilities that are opened in terms of testing by the integration of a real-time simulator into co-simulation environments. Three practical implementations of such systems together with performance metrics are discussed. Two control-related examples are selected in order to show the capabilities of the proposed approach.

Real-time simulation methods for investigations on electric networks and integration of grid connected generation units are increasingly in the focus of ongoing research areas. While laboratory testing methods are the predominant method for the verification of safety and quality related features of grid-connected generation units in the past, load flow modeling verification methods have been integrated in state-of-the-art standardization frameworks recently. The next step is comprised in real-time simulation methodologies applied for compliance testing of entire power electronic systems integrated in power distribution networks. The Controller Hardware-in-the-Loop (CHIL) approach is an appropriate methodology that combines numerical simulations with software modeling approaches and classical hardware testing in labs. Control boards represent the hardware device directly connected to the power electronic periphery, which is entirely simulated in a real-time simulation environment. Hereby, input signals from voltage and current measurements and output signals for power system control are exchanged in real-time. Thanks to this setup the testing of the true behavior of entire generation units within the electric network can be emulated precisely. With the application of CHIL a shorter time to market and a lower risk in the development phase can be achieved. However, an analysis from realized CHIL experiments shows the need for more harmonized procedures. This paper addresses this topic and provides an outlook about necessary future CHIL standardization needs.

This paper addresses the validation of electric vehicle supply equipment by means of a real-time capable co-simulation approach. This setup implies both pure software and real-time simulation tasks with different sampling rates dependent on the type of the performed experiment. In contrast, controller and power hardware-in-the-loop simulations are methodologies which ask for real-time execution of simulation models with well-defined simulation sampling rates. Software and real-time methods are connected one to each other using an embedded software interface. It is able to process signals with different time step sizes and is called \"LabLink\". Its design implies both common and specific input and output layers (middle layer), as well as a data bus (core). The LabLink enables the application of the co-simulation methodology on the proposed experimental platform targeting the testing of electric vehicle supply equipment. The test setup architecture and representative examples for the implemented co-simulation are presented in this paper. As such, a validation of the usability of this testing platform can be highlighted aiming to support a higher penetration of electric vehicles.

New testing and development procedures and methods are needed to address topics like power system stability, operation and control in the context of grid integration of rapidly developing smart grid technologies. In this context, individual testing of units and components has to be reconsidered and appropriate testing procedures and methods need to be described and implemented. This paper addresses these needs by proposing a holistic and enhanced testing methodology that integrates simulation/software- and hardware-based testing infrastructure. This approach presents the advantage of a testing environment, which is very close to f i eld testing, includes the grid dynamic behavior feedback and is risks-free for the power system, for the equipment under test and for the personnel executing the tests. Furthermore, this paper gives an overview of successful implementation of the proposed testing approach within different testing infrastructure available at the premises of different research institutes in Europe.

Smart grid systems are characterized by high complexity due to interactions between a traditional passive network and active power electronic components, coupled using communication links. Additionally, automation and information technology plays an important role in order to operate and optimize such cyber-physical energy systems with a high(er) penetration of fluctuating renewable generation and controllable loads. As a result of these developments the validation on the system level becomes much more important during the whole engineering and deployment process, today. In earlier development stages and for larger system configurations laboratory-based testing is not always an option. Due to recent developments, simulation-based approaches are now an appropriate tool to support the development, implementation, and roll-out of smart grid solutions. This paper discusses the current state of simulation-based approaches and outlines the necessary future research and development directions in the domain of power and energy systems.

The integration of distributed renewable energy sources and the multi-domain behaviours inside the cyber-physical energy system (smart grids) draws up major challenges. Their validation and roll out requires careful assessment, in term of modelling, simulation and testing. The traditional approach focusing on a particular object, actual hardware or a detailed model, while drastically simplifying the remainder of the system under test, is no longer sufficient. Real-time simulation and Hardware-in-the-Loop (HIL) techniques emerge as indispensable tools for validating the behaviour of renewable sources as well as their impact/interaction to with the cyber-physical energy system. This paper aims to provide an overview of the present status-quo of real-time and HIL approaches used for smart grids and their readiness for cyber-physical experiments. We investigate the current limitations of HIL techniques and point out necessary future developments. Subsequently, the paper highlights challenges that need specific attention as well as ongoing actions and further research directions.

While the international nEDM collaboration at the Paul Scherrer Institut (PSI) took data in 2017 that covered a considerable fraction of the parameter space of claimed potential signals of hypothetical neutron (n) to mirror-neutron (n′) transitions, it could not test all claimed signal regions at various mirror magnetic fields. Therefore, a new study of n−n′ oscillations using stored ultracold neutrons (UCNs) is underway at PSI, considerably expanding the reach in parameter space of mirror magnetic fields (B′) and oscillation time constants (τnn′). The new apparatus is designed to test for the anomalous loss of stored ultracold neutrons as a function of an applied magnetic field. The experiment is distinguished from its predecessors by its very large storage vessel (1.47 m3), enhancing its statistical sensitivity. In a test experiment in 2020 we have demonstrated the capabilities of our apparatus. However, the full analysis of our recent data is still pending. Based on already demonstrated performance, we will reach sensitivity to oscillation times τnn′/cos(β) well above a hundred seconds, with β being the angle between B′ and the applied magnetic field B. The scan of B will allow the finding or the comprehensive exclusion of potential signals reported in the analysis of previous experiments and suggested to be consistent with neutron to mirror-neutron oscillations.

We demonstrate the use of a hybrid \\(^{3}\\)He / \\(^{87}\\)Rb magnetometer to measure absolute magnetic fields in the pT range. The measurements were undertaken by probing time-dependent \\(^3\\)He magnetisation using \\(^{87}\\)Rb zero-field magnetometers. Measurements were taken to demonstrate the use of the magnetometer in cancelling residual fields within a magnetic shield. It was shown that the absolute field could be reduced to the 10 pT level by using field readings from the magnetometer. Furthermore, the hybrid magnetometer was shown to be applicable for the reduction of gradient fields by optimising the effective \\(^3\\)He \\(T_2\\) time. This procedure represents a convenient and consistent way to provide a near zero magnetic field environment which can be potentially used as a base for generating desired magnetic field configurations for use in precision measurements.