Explore the vast range of titles available.

Hepatocellular carcinoma (HCC) is an aggressive liver cancer with limited effective treatment options. In this study, we selected TLR agonists imiquimod (IMQ), gardiquimod (GARD), GS-9620 and DSR 6434, and a small molecule checkpoint inhibitor, BMS-202, for characterization of drug loading and release from radiopaque embolic beads (DC Bead LUMI) for potential use in image-guided transarterial embolization (TACE) of HCC. The maximum drug loading capacity and amount of drug released over time were determined by high performance liquid chromatography and compared with the commonly used anthracycline, doxorubicin hydrochloride (Dox). Maximum drug loading was 204.54 ± 3.87, 65.97 ± 1.54, 65.95 ± 6.96, 65.28 ± 3.09, and 148.05 ± 2.24 mg of drug per milliliter of DC Bead LUMI for Dox, GARD, DSR 6434, IMQ, and BMS-202, respectively. Fast loading and subsequent rapid release in saline were observed for IMQ, GARD, and DSR 6434. These drugs could also be partially removed from the beads by repeated washing with de-ionized water suggesting weak interaction with the beads. Aggregation of IMQ was observed in water and saline. GS-9620 partially decomposed in the solubilizing solution, so loading and release were not characterized. Compared to TLR agonists, slower loading and release were observed for Dox and BMS-202. Potential factors influencing drug loading into and release from DC Bead LUMI including steric hinderance, hydrophobicity, drug pKa, and the electrostatic nature of the beads are discussed. The maximum loading capacity of BMS-202 and Dox in DC Bead LUMI exceeded the maximum theoretical loading capacity of the beads expected from ionic interaction alone suggesting additional drug-bead or drug-drug interactions may play a role. Slightly more release was observed for BMS-202 at early time points followed by a slower release compared to Dox. Further study of these drug-bead combinations is warranted in search of new tools for locoregional delivery of immune-modulating agents for treatment of HCC via drug-eluting bead chemoembolization.

Current therapy for hypervascular cancers, e.g., hepatocellular carcinoma, includes occlusion of the tumor blood supply by arterial infusion of embolic microspheres (beads) suspended in iodine-based contrast under fluoroscopic guidance. Available radiopaque, imageable beads use iodine as the radiopacifier and cannot be differentiated from contrast. This study aimed to synthesize and characterize imageable beads using bismuth as the radiopacifier that could be distinguished from iodine contrast based upon the difference in the binding energy of k-shell electrons (k-edge). Radiodense bismuth beads were successfully synthesized some with uniform bismuth distribution across the beads. The beads were spherical and could be infused through clinical microcatheters. The bismuth beads could be imaged with clinical dual-energy computed tomography (CT), where iodine-based contrast could be distinguished from the microspheres. The ability to separate iodine from bismuth may enhance the diagnostic information acquired on follow-up CT, identifying the distribution of the embolic beads separately from the contrast. Furthermore, with sequential use of iodine- and bismuth-based beads, the two radiopaque beads could be spatially distinguished on imaging, which may enable the development of dual drug delivery and dual tracking.

This review describes the historical development of an imageable spherical embolic agent and focuses on work performed in collaboration between Biocompatibles UK Ltd (a BTG International group company) and the NIH to demonstrate radiopaque bead utility and bring a commercial offering to market that meets a clinical need. Various chemistries have been investigated and multiple prototypes evaluated in search of an optimized product with the right balance of handling and imaging properties. Herein, we describe the steps taken in the development of DC Bead LUMI™, the first commercially available radiopaque drug-eluting bead, ultimately leading to the first human experience of this novel embolic agent in the treatment of liver tumors.

We elucidate the interaction between actin and specific membrane components, using real time live cell imaging, by delivering probes that enable access to components, that cannot be accessed genetically. We initially investigated the close interplay between Phosphatidylinositol 4,5-bisphosphate (PIP2) and the F-actin network. We show that, during the early stage of cell adhesion, PIP2 forms domains within the filopodia membrane. We studied these domains alongside cell spreading and observed that these very closely follow the actin tread-milling. We show that this mechanism is associated with an active transport of PIP2 rich organelles from the cell perinuclear area to the edge, along actin fibers. Finally, mapping other phospholipids and membrane components we observed that the PIP2 domains formation is correlated with sphingosine and cholesterol rafts.

Nasal delivery of large peptides such as parathyroid 1-34 (PTH 1-34) can benefit from a permeation enhancer to promote absorption across the nasal mucosa into the bloodstream. Previously, we have published an encouraging bioavailability (78%), relative to subcutaneous injection in a small animal preclinical model, for a liquid nasal spray formulation containing the permeation enhancer polyethylene glycol (15)-hydroxystearate (Solutol® HS15). We report here the plasma pharmacokinetics of PTH 1-34 in healthy human volunteers receiving the liquid nasal spray formulation containing Solutol® HS15. For comparison, data for a commercially manufactured teriparatide formulation delivered via subcutaneous injection pen are also presented. Tc-99m-DTPA gamma scintigraphy monitored the deposition of the nasal spray in the nasal cavity and clearance via the inferior meatus and nasopharynx. The 50% clearance time was 17.8 min (minimum 10.9, maximum 74.3 min). For PTH 1-34, mean plasma Cmax of 5 pg/mL and 253 pg/mL were obtained for the nasal spray and subcutaneous injection respectively; relative bioavailability of the nasal spray was ≤1%. Subsequently, we investigated the pharmacokinetics of the liquid nasal spray formulation as well as a dry powder nasal formulation also containing Solutol® HS15 in a crossover study in an established ovine model. In this preclinical model, the relative bioavailability of liquid and powder nasal formulations was 1.4% and 1.0% respectively. The absolute bioavailability of subcutaneously administered PTH 1-34 (mean 77%, range 55–108%) in sheep was in agreement with published human data for teriparatide (up to 95%). These findings have important implications in the search for alternative routes of administration of peptides for the treatment of osteoporosis, and in terms of improving translation from animal models to humans.

DC Bead is a FDA cleared embolisation device for the treatment of hypervascular tumours and arteriovenous malformations. This product is currently evaluated in a number of centres in Europe as an embolic device for transarterial chemoembolisation (TACE). The beads consist of poly(vinyl alcohol) microspheres modified with sulfonic acid groups and are available at different size ranges varying from 100 to 900 microm in diameter. The beads were shown to actively sequester doxorubicin hydrochloride (dox) from solution in a time dependent upon the dose of the drug and size of the beads. Drug uptake was by an ion-exchange mechanism, and in the absence of other ions in solution, the beads could load a maximum of around 40 mg dox/mL hydrated beads, with >99% of drug being sequestered from the solution. A loading of 25 mg dox/mL beads was recommended as providing a practical therapeutic dose and optimum handling characteristics. There was a decrease in equilibrium water content of the beads with increasing dox loading, which resulted in a decrease in the average diameter of the beads and an increase in the compressive modulus. The deliverability properties, however, were not affected after drug loading. Using a variety of microscopic methods, the drug was shown to be distributed throughout the bead structure, but concentrated in the outer 20 microm surface layer, a feature related to the method of synthesis. This study characterises the properties of DC Bead loaded with dox with respect to important characteristics in embolisation and demonstrates the potential of this drug device combination for the treatment of hypervascular tumours such as hepatocellular carcinoma.

Achieving efficacious systemic levels of orally administered peptides is incredibly challenging due to the significant barriers to their bioavailability—their stability in the gastrointestinal tract and challenge of transepithelial transit, and variable pharmacokinetics. Even so, as the generally preferred route of administration, significant research effort in academic and industrial settings has focused on enabling the systemic absorption of orally delivered peptides. Despite several decades of research, few have ever reached the market. The recent approval of Rybelsus® (oral semaglutide) by the FDA [1], the EMA [2], and the Pmda [3] represents a significant landmark in the delivery of therapeutic peptides and is the culmination of more than 30 years research and development of the drug delivery technology enabling the product—Emisphere’s Eligen™ technology—and an outstanding commitment to scientific, technical, and clinical innovation by Novo Nordisk. Following years of fundamental and applied research, an innovative clinical strategy led to the aptly named PIONEER clinical programme. This included ten Phase 3 clinical trials that demonstrated the tablet formulation to be as effective as the already approved injectable form of the drug, and more effective than competitor products in terms of its blood glucose lowering effects and weight loss. Not only is this a potentially life changing medicine for diabetic patients, it holds tremendous commercial potential for Novo Nordisk, with some analysts predicting the product to reach $5 billion in peak revenues [3]. In this “Inspirational Note,” we summarize some of the public domain work that led to the achievement of this significant milestone and provide commentary on its potential future impact.

DC Bead™ is a sulfonate-modified, PVA-based microspherical embolisation agent approved for the treatment of hypervascular tumours and arterio-venous malformations. The beads have previously been shown to actively sequester oppositely charged drugs, such as doxorubicin hydrochloride (dox) by an ion-exchange mechanism. In order to characterise the release kinetics and predict the in vivo behaviour of drug eluting beads (DEB), two elution methods were utilised. The first, an application of the USP dissolution method Type II - Apparatus, enables study of the complete elution of loaded DC Bead in less than 4 h, allowing relatively rapid comparison to be made between different products and formulations. Release data obtained using this method were fitted to first order kinetics ( R 2  > 0.998) and the elution constants shown to increase with the total surface area of the beads exposed to the elution medium. Diffusion coefficients were calculated adopting the Fickian diffusion model, which predicted slow elution rates under physiological conditions. The second method involved the use of a T-Apparatus where the drug experiences an element of diffusion through a static environment. This method was developed to resemble the in vivo situation in embolisation procedures more closely. Slow release of dox from DC Bead with half-lives over 1,500 h were predicted for all size ranges using a slow release model. A strong linear relationship was found between the release data from T-Apparatus and pharmacokinetic data obtained from patients treated with DC Bead loaded with dox in transarterial chemoembolisation (TACE) procedures. These data indicated a Level A in vitro–in vivo correlation (IVIVC) for the first 24 h post embolisation. Both systems developed were automated and good reproducibility was obtained for all samples, demonstrating the usefulness of these elution techniques for product development and comparative testing.

Sclerotherapy is among the least invasive and most commonly utilised treatment options for varicose veins. Nonetheless, it does not cure varicosities permanently and recurrence rates are of up to 64%. Although sclerosing foams have been extensively characterised with respect to their bench-top properties, such as bubble size distribution and half-life, little is known about their flow behaviour within the venous environment during treatment. Additionally, current methods of foam characterisation do not recapitulate the end-point administration conditions, hindering optimisation of therapeutic efficacy. Here, a therapeutically relevant apparatus has been used to obtain a clinically relevant rheological model of sclerosing foams. This model was then correlated with a therapeutically applicable parameter—i.e., the capability of foams to displace blood within a vein. A pipe viscometry apparatus was employed to obtain a rheological model of 1% polidocanol foams across shear rates of 6 s−1 to 400 s−1. Two different foam formulation techniques (double syringe system and Tessari) and three liquid-to-gas ratios (1:3, 1:4 and 1:5) were investigated. A power-law model was employed on the rheological data to obtain the apparent viscosity of foams. In a separate experiment, a finite volume of foam was injected into a PTFE tube to displace a blood surrogate solution (0.2% w/v carboxymethyl cellulose). The displaced blood surrogate was collected, weighed, and correlated with foam’s apparent viscosity. Results showed a decreasing displacement efficacy with foam dryness and injection flowrate. Furthermore, an asymptotic model was formulated that may be used to predict the extent of blood displacement for a given foam formulation and volume. The developed model could guide clinicians in their selection of a foam formulation that exhibits the greatest blood displacement efficacy.