Explore the vast range of titles available.

Single-atom catalysts (SACs) have been applied in many fields due to their superior catalytic performance. Because of the unique properties of the single-atom-site, using the single atoms as catalysts to synthesize SACs is promising. In this work, we have successfully achieved Co 1 SAC using Pt 1 atoms as catalysts. More importantly, this synthesis strategy can be extended to achieve Fe and Ni SACs as well. X-ray absorption spectroscopy (XAS) results demonstrate that the achieved Fe, Co, and Ni SACs are in a M 1 -pyrrolic N 4 (M= Fe, Co, and Ni) structure. Density functional theory (DFT) studies show that the Co(Cp) 2 dissociation is enhanced by Pt 1 atoms, thus leading to the formation of Co 1 atoms instead of nanoparticles. These SACs are also evaluated under hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), and the nature of active sites under HER are unveiled by the operando XAS studies. These new findings extend the application fields of SACs to catalytic fabrication methodology, which is promising for the rational design of advanced SACs. Synthesizing single-atom catalysts through a general method presents a great challenge. Here the authors report that Fe, Co and Ni single-atom catalysts can be obtained using pre-located isolated Pt atoms as the catalyst and identify the role of Pt single atoms in the synthesis process.

Cumulative mistuning effects in electric vehicle wireless charging systems, arising from component tolerances, coil misalignments, and aging-induced drifts, can significantly degrade system performance. To mitigate this issue, this work establishes an analysis model for mistuned series–series-compensated wireless power transfer (WPT) systems. Through equivalent simplification of mistuned parameters, we systematically examine the effects of compensation capacitances and coil inductances on input impedance, output power, and efficiency in SS-compensated topologies across wide load ranges and different coupling coefficients. Results reveal that transmitter-side parameter deviations exert more pronounced impacts on input impedance and power gain than receiver-side variations. Remarkably, under receiver-side inductance mistuning of −20%, a significant 32° shift in the input impedance angle was observed. Experimental validation on a 500 W prototype confirms ≤5% maximum deviation between calculated and measured values for efficiency, input impedance angle, and power gain.

High-energy Ni-rich layered oxide cathode materials such as LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC811) suffer from detrimental side reactions and interfacial structural instability when coupled with sulfide solid-state electrolytes in all-solid-state lithium-based batteries. To circumvent this issue, here we propose a gradient coating of the NMC811 particles with lithium oxy-thiophosphate (Li 3 P 1+x O 4 S 4x ). Via atomic layer deposition of Li 3 PO 4 and subsequent in situ formation of a gradient Li 3 P 1+x O 4 S 4x coating, a precise and conformal covering for NMC811 particles is obtained. The tailored surface structure and chemistry of NMC811 hinder the structural degradation associated with the layered-to-spinel transformation in the grain boundaries and effectively stabilize the cathode|solid electrolyte interface during cycling. Indeed, when tested in combination with an indium metal negative electrode and a Li 10 GeP 2 S 12 solid electrolyte, the gradient oxy-thiophosphate-coated NCM811-based positive electrode enables the delivery of a specific discharge capacity of 128 mAh/g after almost 250 cycles at 0.178 mA/cm 2 and 25 °C. Layered oxide cathode active materials suffer from interfacial structural instability when coupled with sulfide solid-state electrolytes. Here, the authors propose a gradient coating with a lithium oxythiophosphate layer that can stabilize the cathode|solid-state electrolyte interface.

The fifth-generation (5G) wireless communication has an urgent need for target tracking. Digital programmable metasurface (DPM) may offer an intelligent and efficient solution owing to its powerful and flexible controls of electromagnetic waves and advantages of lower cost, less complexity and smaller size than the traditional antenna array. Here, we report an intelligent metasurface system to perform target tracking and wireless communications, in which computer vision integrated with a convolutional neural network (CNN) is used to automatically detect the locations of moving targets, and the dual-polarized DPM integrated with a pre-trained artificial neural network (ANN) serves to realize the smart beam tracking and wireless communications. Three groups of experiments are conducted for demonstrating the intelligent system: detection and identification of moving targets, detection of radio-frequency signals, and real-time wireless communications. The proposed method sets the stage for an integrated implementation of target identification, radio environment tracking, and wireless communications. This strategy opens up an avenue for intelligent wireless networks and self-adaptive systems. The authors present an intelligent metasurface system that uses a target detection algorithm combined with a depth camera, to automatically detect the position of moving targets and achieve real-time wireless communications. The system can operate for multiple targets in limited ambient light, outdoor and other realistic environments.

All-solid-state lithium-sulfur batteries offer a compelling opportunity for next-generation energy storage, due to their high theoretical energy density, low cost, and improved safety. However, their widespread adoption is hindered by an inadequate understanding of their discharge products. Using X-ray absorption spectroscopy and time-of-flight secondary ion mass spectrometry, we reveal that the discharge product of all-solid-state lithium-sulfur batteries is not solely composed of Li 2 S, but rather consists of a mixture of Li 2 S and Li 2 S 2 . Employing this insight, we propose an integrated strategy that: (1) manipulates the lower cutoff potential to promote a Li 2 S 2 -dominant discharge product and (2) incorporates a trace amount of solid-state catalyst (LiI) into the S composite electrode. This approach leads to all-solid-state cells with a Li-In alloy negative electrode that deliver a reversible capacity of 979.6 mAh g −1 for 1500 cycles at 2.0 A g −1 at 25 °C. Our findings provide crucial insights into the discharge products of all-solid-state lithium-sulfur batteries and may offer a feasible approach to enhance their overall performance. All-solid-state lithium sulfur batteries may avoid some of the drawbacks of their liquid electrolyte counterparts. Here, the authors elucidate the composition of discharge products in all-solid-state cells using spectroscopic techniques and propose a strategy to control the discharge product.

Earth’s habitability is closely tied to its late-stage accretion, during which impactors delivered the majority of life-essential volatiles. However, the nature of these final building blocks remains poorly constrained. Nickel (Ni) can be a useful tracer in characterizing this accretion as most Ni in the bulk silicate Earth (BSE) comes from the late-stage impactors. Here, we apply Ni stable isotope analysis to a large number of meteorites and terrestrial rocks, and find that the BSE has a lighter Ni isotopic composition compared to chondrites. Using first-principles calculations based on density functional theory, we show that core-mantle differentiation cannot produce the observed light Ni isotopic composition of the BSE. Rather, the sub-chondritic Ni isotopic signature was established during Earth’s late-stage accretion, probably through the Moon-forming giant impact. We propose that a highly reduced sulfide-rich, Mercury-like body, whose mantle is characterized by light Ni isotopic composition, collided with and merged into the proto-Earth during the Moon-forming giant impact, producing the sub-chondritic Ni isotopic signature of the BSE, while delivering sulfur and probably other volatiles to the Earth. Based on Nickel isotope analysis of meteorites and terrestrial rocks, the authors suggest that the Bulk Silicate Earth has a sub-chondritic Nickel isotope composition. This signature is thought to result from the impact and accretion of a Mercury-like impactor which originated from the innermost Solar System.

Inositol requiring enzyme 1 (IRE1) mitigates endoplasmic-reticulum (ER) stress by orchestrating the unfolded-protein response (UPR). IRE1 spans the ER membrane, and signals through a cytosolic kinase-endoribonuclease module. The endoribonuclease generates the transcription factor XBP1s by intron excision between similar RNA stem-loop endomotifs, and depletes select cellular mRNAs through regulated IRE1-dependent decay (RIDD). Paradoxically, in mammals RIDD seems to target only mRNAs with XBP1-like endomotifs, while in flies RIDD exhibits little sequence restriction. By comparing nascent and total IRE1α-controlled mRNAs in human cells, we identify not only canonical endomotif-containing RIDD substrates, but also targets without such motifs—degraded by a process we coin RIDDLE, for RIDD lacking endomotif. IRE1α displays two basic endoribonuclease modalities: highly specific, endomotif-directed cleavage, minimally requiring dimers; and more promiscuous, endomotif-independent processing, requiring phospho-oligomers. An oligomer-deficient IRE1α mutant fails to support RIDDLE in vitro and in cells. Our results advance current mechanistic understanding of the UPR. IRE1 helps mitigate endoplasmic-reticulum stress by cleaving specific mRNAs at a conserved sequence endomotif via regulated IRE1-dependent decay (RIDD). Here the authors discover a more promiscuous IRE1 activity dubbed RIDD lacking endomotif (RIDDLE).

Energy is an indispensable part of human life. People’s life is inextricably linked with energy, and energy will also have a significant impact on social stability. In view of the urgency of energy conservation and the huge consumption of energy in the building industry, this paper analyzes the current situation of energy conservation and technical improvement of shopping mall buildings. First of all, this paper analyzes the current situation of energy-saving in shopping malls in China and figures out the existing problems of energy-saving in shopping malls at the current stage. Secondly, this paper offers some potential measures to improve the efficiency of energy-saving shopping malls from the site selection, HVAC, lighting energy saving these three aspects.

The effects of IT and R.I.C.E. treatment on arm muscle performance in overhead athletes with elbow pain (EP) have been partially validated. However, there is a lack of research evidence regarding the efficacy of these two methods on arm muscle performance among swimmers with EP. The aim of this study was to investigate the trends and differences in the effects of IT and R.I.C.E. treatment on arm muscle performance among swimmers with EP. The main outcomes were the time effects and group effects of interventions on muscle voluntary contraction (MVC). Sixty elite freestyle swimmers from Tianjin, China, voluntarily participated in the study and completed a 10-week intervention program. Swimmers with EP in the IT group showed a positive trend in MVC, with an approximately 2% increase, whereas the MVC of subjects in the R.I.C.E. treatment group and control group decreased by approximately 4% and 5%, respectively. In comparison, the effects of the IT intervention on the MVC of the triceps and brachioradialis muscles in swimmers with EP were significant (p = 0.042 < 0.05, p = 0.027 < 0.05). The mean MVC value of the IT group (0.60) was greater than that of the other two groups (0.51, 0.50). IT has a beneficial impact on the MVC performance of the triceps and brachioradialis muscles in swimmers with EP. It is recommended that professionals consider incorporating IT into regular training routines to mitigate the risk of EP issues. Future research should examine the effectiveness of both interventions on hand-grip strength and completion time in 50-m freestyle swim drills in order for swimmers with EP to return to this sport.

Empowering the reconfigurable metasurfaces (RM) with the capability to be mechanically deformable highlights the possibility to manipulate the electromagnetic (EM) wave across arbitrary surfaces. Such ambition is hampered by the absence of adaptivity to shape variation in current programming strategies for RM. Herein, we present a flexible intelligent surface platform (FISP) as a solution to achieve flexible RM with highly stable performance under dynamic deformation. The geometry acquisition module in FISP enables real-time awareness of RM’s deformation with the conformal sensor array. By merging the actual shape of flexible RM into the input of the adaptive algorithm driven by the artificial neural network, the deformed flexible RM in FISP can be autonomously encoded by the bias voltage supply module to ensure robust performance under various deformation conditions. The versatility of FISP in manipulating EM waves is demonstrated by its applications in electromagnetic illusion, carpet cloaking, and data transmission, illustrating the prospects for seamlessly integrating flexible electronics and RM in the development of future EM metasurfaces. The authors demonstrate a multifunctional flexible metasurface platform that integrates deformation sensors with an adaptive encoding algorithm, providing high-performance robustness in dynamic deformation scenarios.