Explore the vast range of titles available.

Due to its high carrier mobility, broadband absorption and fast response time, the semi-metallic graphene is attractive for optoelectronics. Another two-dimensional semiconducting material molybdenum disulfide (MoS 2 ) is also known as light- sensitive. Here we show that a large-area and continuous MoS 2 monolayer is achievable using a CVD method and graphene is transferable onto MoS 2 . We demonstrate that a photodetector based on the graphene/MoS 2 heterostructure is able to provide a high photogain greater than 10 8 . Our experiments show that the electron-hole pairs are produced in the MoS 2 layer after light absorption and subsequently separated across the layers. Contradictory to the expectation based on the conventional built-in electric field model for metal-semiconductor contacts, photoelectrons are injected into the graphene layer rather than trapped in MoS 2 due to the presence of a perpendicular effective electric field caused by the combination of the built-in electric field, the applied electrostatic field and charged impurities or adsorbates, resulting in a tuneable photoresponsivity.

We here report on the direct observation of ferroelectric properties of water ice in its 2D phase. Upon nanoelectromechanical confinement between two graphene layers, water forms a 2D ice phase at room temperature that exhibits a strong and permanent dipole which depends on the previously applied field, representing clear evidence for ferroelectric ordering. Characterization of this permanent polarization with respect to varying water partial pressure and temperature reveals the importance of forming a monolayer of 2D ice for ferroelectric ordering which agrees with ab-initio and molecular dynamics simulations conducted. The observed robust ferroelectric properties of 2D ice enable novel nanoelectromechanical devices that exhibit memristive properties. A unique bipolar mechanical switching behavior is observed where previous charging history controls the transition voltage between low-resistance and high-resistance state. This advance enables the realization of rugged, non-volatile, mechanical memory exhibiting switching ratios of 10 6 , 4 bit storage capabilities and no degradation after 10,000 switching cycles. Ferroelectric ordering of water has been at the heart of intense debates due to its importance in enhancing our understanding of the condensed matter. Here, the authors observe ferroelectric properties of water ice in a two dimensional phase under confinement between two graphene layers.

The development of modern cutting-edge technology relies heavily on the huge success and advancement of nanotechnology, in which nanomaterials and nanostructures provide the indispensable material cornerstone. Owing to their nanoscale dimensions with possible quantum limit, nanomaterials and nanostructures possess a high surface-to-volume ratio, rich surface/interface effects, and distinct physical and chemical properties compared with their bulk counterparts, leading to the remarkably expanded horizons of their applications. Depending on their degree of spatial quantization, low-dimensional nanomaterials are generally categorized into nanoparticles (0D); nanorods, nanowires, and nanobelts (1D); and atomically thin layered materials (2D). This review article provides a comprehensive guide to low-dimensional nanomaterials and nanostructures. It begins with the classification of nanomaterials, followed by an inclusive account of nanofabrication and characterization. Both top-down and bottom-up fabrication approaches are discussed in detail. Next, various significant applications of low-dimensional nanomaterials are discussed, such as photonics, sensors, catalysis, energy storage, diverse coatings, and various bioapplications. This article would serve as a quick and facile guide for scientists and engineers working in the field of nanotechnology and nanomaterials.

The development of flexible capacitive pressure sensors has wide application prospects in the fields of electronic skin and intelligent wearable electronic devices, but it is still a great challenge to fabricate capacitive sensors with high sensitivity. Few reports have considered the use of interdigital electrode structures to improve the sensitivity of capacitive pressure sensors. In this work, a new strategy for the fabrication of a high-performance capacitive flexible pressure sensor based on MXene/polyvinylpyrrolidone (PVP) by an interdigital electrode is reported. By increasing the number of interdigital electrodes and selecting the appropriate dielectric layer, the sensitivity of the capacitive sensor can be improved. The capacitive sensor based on MXene/PVP here has a high sensitivity (~1.25 kPa −1 ), low detection limit (~0.6 Pa), wide sensing range (up to 294 kPa), fast response and recovery times (~30/15 ms) and mechanical stability of 10000 cycles. The presented sensor here can be used for various pressure detection applications, such as finger pressing, wrist pulse measuring, breathing, swallowing and speech recognition. This work provides a new method of using interdigital electrodes to fabricate a highly sensitive capacitive sensor with very promising application prospects in flexible sensors and wearable electronics.

Background and Objectives: Peripheral arterial disease (PAD) is highly prevalent in patients with end-stage renal disease and is associated with adverse cardiovascular outcomes. Although the ankle–brachial index (ABI) is widely used to identify PAD, it may not fully reflect the complex vascular pathophysiology in patients undergoing peritoneal dialysis (PD). Antibodies against oxidized low-density lipoprotein (anti-oxLDL Ab) have been implicated in atherogenesis; however, their clinical relevance in PD populations remains unclear. Materials and Methods: In this cross-sectional investigation, 90 patients receiving maintenance PD were included. PAD was defined by an ABI below 0.90, and serum anti-oxLDL antibody concentrations were quantified using an enzyme-linked immunosorbent assay. Results: Patients with PAD were older (p = 0.006), had a higher prevalence of diabetes (p = 0.010), and exhibited higher levels of triglycerides (p = 0.008), fasting glucose (p < 0.001), and C-reactive protein (CRP, p < 0.001), but lower anti-oxLDL Ab levels (p = 0.008). Multivariable logistic regression demonstrated that reduced anti-oxLDL Ab levels (per 10 mU/mL increase, odds ratio [OR]: 0.803, 95% confidence interval [CI]: 0.648–0.995, p = 0.045) and increased CRP levels (per 0.1 mg/dL increase, OR: 1.662, 95% CI: 1.152–2.398, p = 0.007) were independently associated with PAD, with consistent results across penalized regression models. Log-transformed anti-oxLDL Ab levels were positively correlated with both left and right ABI values (p = 0.005 and p = 0.017, respectively). Decision curve analysis indicated that the anti-oxLDL Ab-based model provided greater net benefit compared with the treat-all and treat-none strategies across a range of threshold probabilities. Conclusions: Reduced serum anti-oxLDL Ab levels are independently associated with PAD in patients undergoing PD. Serum anti-oxLDL Ab levels are positively associated with ABI values. These findings suggest that impaired immunity against oxidized LDL may contribute to vascular disease in PD patients.

Recent discoveries of the photoresponse of molybdenum disulfide (MoS 2 ) have shown the considerable potential of these two-dimensional transition metal dichalcogenides for optoelectronic applications. Among the various types of photoresponses of MoS 2 , persistent photoconductivity (PPC) at different levels has been reported. However, a detailed study of the PPC effect and its mechanism in MoS 2 is still not available, despite the importance of this effect on the photoresponse of the material. Here, we present a systematic study of the PPC effect in monolayer MoS 2 and conclude that the effect can be attributed to random localized potential fluctuations in the devices. Notably, the potential fluctuations originate from extrinsic sources based on the substrate effect of the PPC. Moreover, we point out a correlation between the PPC effect in MoS 2 and the percolation transport behavior of MoS 2 . We demonstrate a unique and efficient means of controlling the PPC effect in monolayer MoS 2 , which may offer novel functionalities for MoS 2 -based optoelectronic applications in the future.

This study presents the development of a novel biodegradable, self-expanding stent designed to facilitate arteriovenous fistula (AVF) maturation. The stent, made of polylactic acid (PLA), is engineered to be crimped into a standard 6 Fr (2 mm) catheter for delivery and to self-expand, increasing the vein diameter beyond 4.2 mm with the aid of pre-strained elastic lines, thereby enhancing maturation rates. A validated finite element model was utilized to design the stent, ensuring it meets functional requirements with less than 3% strain in both crimped and fully expanded states. The stent prototype was fabricated using a modified fused deposition modeling (FDM) 3D printer, and the Taguchi method was employed to optimize manufacturing parameters, achieving strut width and thickness variations of less than 5%. Experimental validation demonstrated that the PLA stent could be crimped to 2 mm, self-expand to 6.4 mm, and deliver a radial force of 0.08 N/mm, meeting the performance requirements of AVF stents. Additionally, the stent exhibits excellent elasticity post-implantation, minimizing the risk of damage from external forces, and fully degrades after AVF maturation, reducing the risk of long-term vascular obstruction and related complications. This novel stent design offers a promising biodegradable solution for enhancing AVF maturation and improving patient outcomes.

There is growing evidence on the involvement of oxidative stress, which is simply described as the imbalance between oxidants and antioxidants in favor of the former, in the development of periodontal disease that is the most common inflammatory disease in the oral cavity. Thus, the potential of antioxidant phytochemicals as adjunctively preventive and therapeutic agents against the initiation and progression of periodontal disease is a topic of great interest. The current review firstly aims to provide updated insights about the immuno-inflammatory pathway regulated by oxidative stress in periodontal pathology. Then, this work further presents the systemic knowledge of antioxidant phytochemicals, particularly the pharmacological activities, which can be utilized in the prevention and treatment of periodontal disease. Additionally, the challenges and future prospects regarding such a scope are figured out.

The fractional quantum Hall effect is a canonical example of electron–electron interactions producing new ground states in many-body systems. Most fractional quantum Hall studies have focussed on the lowest Landau level, whose fractional states are successfully explained by the composite fermion model. In the widely studied GaAs-based system, the composite fermion picture is thought to become unstable for the N ≥2 Landau level, where competing many-body phases have been observed. Here we report magneto-resistance measurements of fractional quantum Hall states in the N =2 Landau level (filling factors 4<| ν |<8) in bilayer graphene. In contrast with recent observations of particle–hole asymmetry in the N =0/ N =1 Landau levels of bilayer graphene, the fractional quantum Hall states we observe in the N =2 Landau level obey particle–hole symmetry within the fully symmetry-broken Landau level. Possible alternative ground states other than the composite fermions are discussed. Electron-electron interactions in many-body systems may manifest themselves through the fractional quantum Hall effect. Here, the authors perform transport measurements in bilayer graphene, and observe particle-hole symmetric fractional quantum Hall states in the N =2 Landau level.

Superconductivity remains one of most fascinating quantum phenomena existing on a macroscopic scale. Its rich phenomenology is usually described by the Ginzburg–Landau (GL) theory in terms of the order parameter, representing the macroscopic wave function of the superconducting condensate. The GL theory addresses one of the prime superconducting properties, screening of the electromagnetic field because it becomes massive within a superconductor, the famous Anderson–Higgs mechanism. Here the authors describe another widely‐spread type of superconductivity where the Anderson–Higgs mechanism does not work and must be replaced by the Deser–Jackiw–Templeton topological mass generation and, correspondingly, the GL effective field theory must be replaced by an effective topological gauge theory. These superconductors are inherently inhomogeneous granular superconductors, where electronic granularity is either fundamental or emerging. It is shown that the corresponding superconducting transition is a 3D generalization of the 2D Berezinskii–Kosterlitz–Thouless vortex binding–unbinding transition. The binding–unbinding of the line‐like vortices in 3D results in the Vogel‐Fulcher‐Tamman scaling of the resistance near the superconducting transition. The authors report experimental data fully confirming the VFT behavior of the resistance. The effective field theory of inhomogeneous superconductors is not the Ginzburg–Landau theory but a topological gauge theory. Vortices with no dissipative core can proliferate also with no magnetic field. When the temperature is high enough, vortex deconfinement destroys superconductivity, generalizing the Berezinskii–Kosterlitz–Thouless transition mechanism to any dimension.