Explore the vast range of titles available.

To date, approximately 30–50% of food is wasted from post-harvesting to consumer usage. Typical examples of food by-products are fruit peels and pomace, seeds, and others. A large part of these matrices is still discarded in landfills, while a small portion is valorized for bioprocessing. In this context, a feasible strategy to valorize food by-products consists of their use for the production of bioactive compounds and nanofillers, which can be further used to functionalize biobased packaging materials. The focus of this research was to create an efficient methodology for the extraction of cellulose from leftover orange peel after juice processing and for its conversion into cellulose nanocrystals (CNCs) for use in bionanocomposite films for packaging materials. Orange CNCs were characterized by TEM and XRD analyses and added as reinforcing agents into chitosan/hydroxypropyl methylcellulose (CS/HPMC) films enriched with lauroyl arginate ethyl (LAE®). It was evaluated how CNCs and LAE® affected the technical and functional characteristics of CS/HPMC films. CNCs revealed needle-like shapes with an aspect ratio of 12.5, and average length and width of 500 nm and 40 nm, respectively. Scanning electron microscopy and infrared spectroscopy confirmed the high compatibility of the CS/HPMC blend with CNCs and LAE®. The inclusion of CNCs increased the films’ tensile strength, light barrier, and water vapor barrier properties while reducing their water solubility. The addition of LAE® improved the films’ flexibility and gave them biocidal efficacy against the main bacterial pathogens that cause foodborne illness, such as Escherichia coli, Pseudomonas fluorescens, Listeria monocytogenes, and Salmonella enterica.

Surface hydrophobicity and grease resistance of paper may be achieved by the application of coatings usually derived from fossil-oil resources. However, poor recyclability and environmental concerns on generated waste has increased interest in the study of alternative paper coatings. This work focuses on the study of the performances offered by two different biopolymers, poly(3-hydroxybutyrate-co-3hydroxyvalerate) (PHBV) and polycaprolactone (PCL), also assessing the effect of a plasticizer (PEG) when used as paper coatings. The coated samples were characterized for the structural (by scanning electron microscopy, SEM), diffusive (water vapor and grease barrier properties), and surface properties (affinity for water and oil, by contact angle measurements). Samples of polyethylene-coated and fluorinated paper were used as commercial reference. WVTR of coated samples generally decreased and PHBV and PCL coatings with PEG at 20% showed interesting low wettability, as inferred from the water contact angles. Samples coated with PCL also showed increased grease resistance in comparison with plain paper. This work, within the limits of its lab-scale, offers interesting insights for future research lines toward the development of cellulose-based food contact materials that are fully recyclable and compostable.

The increase in consumer demand for safe, convenient, and fresh food with an extended shelf life is accompanied by an interest in the environmental impacts caused by the food industry [...].The increase in consumer demand for safe, convenient, and fresh food with an extended shelf life is accompanied by an interest in the environmental impacts caused by the food industry [...].

The present study assessed the effectiveness of high pressure processing (HPP) for the quality maintenance of pitted sour cherries, with special regard to microbial stabilization and the maintenance of color and of chemical–nutritional properties. The HPP treatment (600 MPa for 3 min at 4 °C) was effective at minimizing the initial microbial load, which remained at negligible levels throughout 5 months of refrigerated storage. The color and total phytochemical content of sour cherries were not influenced by the HPP treatment and were maintained at levels comparable with the fresh product for 3 months of refrigerated storage. For longer storage periods, the typical red color decreased, in agreement with the content of total anthocyanins, which showed a significant decrease (up to 65% after 5 months). The antioxidant activity, measured by the ABTS and DPPH assays, was not affected by the HPP treatment, but slightly reduced during refrigerated storage. The study suggests that HPP may be exploited to extend the shelf life, while maintaining the fresh-like features of sour cherries, thus offering an alternative option to current preservation techniques (based on freezing or heating) commonly applied to this product.

The secondary shelf life (SSL) is defined as the time after package opening during which the food product retains a required level of quality. The SSL, indicated in labels as “best if used within x days after opening”, could lead to domestic food waste if not correctly evaluated. In this context, the SSL of two brands of industrial shelf-stable pesto products (with an indicated SSL of 5 days) was studied through a domestic use simulation performed in five households under two scenarios simulating real opening and storage conditions. The quality of pesto after opening was assessed through microbiological and sensory analyses, determination of instrumental colour parameters, pH and volatiles profiling. For both pesto sauces tested, a SSL ≥ 20 days was proven. Irrespective of the intensity of use (scenarios 1 and 2), the pesto was microbiologically stable: the maximum count for total aerobic mesophilic bacteria (TMB) observed during 20 days of storage was 9.64 ± 1.7 × 102 CFU/g, starting from a commercially stable product. Colour parameters L* and ΔE did not change significantly during storage (p > 0.05), while the a* and BI values significantly changed (p < 0.05) during the first 5 days, and then stabilized during the rest of the household storage. Nevertheless, the slight colour modifications were not perceived by the sensory panel. Moreover, sensory assessors were not able to discern pesto samples stored for up to 20 days after first opening, from a just-opened reference sample, proving that the sensory appreciation of pesto was not influenced by the time after opening. The results of this study suggest the possibility to significantly extend or even omit the SSL indications for industrial pesto sauces. The objective assessment of SSL could have impressive practical outcomes both for the industry and the end user. The elongation of the SSL on the food label might increase food sustainability, thanks to the potential reduction of food wastes, thus giving added value to the commercial products. In addition, the end user could benefit the increase of the useful period for the food consumption after first opening, with significant domestic food waste reduction, reduced household stock turnover and consequent cost savings.

The recovery of yeasts and lactic acid bacteria (LAB) involved in sourdough fermentation is the first step in the selection of starters with suitable technological aptitude and capable of producing desired aromas and/or aromatic precursors. In this work, two sourdoughs samples (MA and MB) and the derived doughs (samples A and B) were collected from a bakery during artisanal Panettone manufacture. Yeasts and bacteria were isolated at different fermentation steps on selective agar media. A total of 77 isolates were obtained and characterized. Representative strains of yeasts and LAB were identified by sequencing the D1/D2 domain of the 26S rRNA and the 16S rRNA genes, respectively. Moreover, the volatile organic compounds (VOCs) produced in the collected samples were detected and correlated to the species found in the same samples. The results highlighted the occurrence of Kazachstania humilis in both samples A and B, while Saccharomyces cerevisiae strains were detected only in samples B. Among LAB, Fructilactobacillus sanfranciscensis was the main species detected in both sourdoughs. Furthermore, strains belonging to the species Lactiplantibacillus plantarum, Furfurilactobacillus rossiae, Lactobacillus parabuchneri, Leuconostoc citreum, and Leuconostoc mesenteroides were assessed in the dough samples.

The influence of light exposure, bottle color and storage temperature on the quality parameters of Malvasia delle Lipari (MdL) sweet wine were investigated. Wine samples bottled in clear-colored (colorless, green and amber) glass were stored under different artificial lighting conditions, in order to simulate the retail environment (one cool-white, fluorescent lamp) and to perform an accelerated test (four and six cool-white, fluorescent lamps). The storage temperature was kept constant (25 °C) for the first 90 days of the experiment and then samples were monitored for up to 180 days at higher temperatures (30, 35 and 40 °C). The principal enological parameters, total phenols, color, 5-hydroxymethylfurfural (HMF) and 2-furaldehyde (2F) contents were studied. The shelf-life test pointed out minimum variations of the basic chemical parameters, while the quality attributes most affected by lighting were color, together with HMF and 2F levels which, hence, can be considered as indicators of the severity of storage conditions.

The aim of the present study is to assess the use of polylactic acid (PLA) bottles as an alternative to polyethylene terephthalate (PET) ones for high-pressure processing (HPP) of apple juice. The treatment of PLA bottles at 600 MPa for 3 min did not cause alterations in the packaging shape and content, confirming the suitability of PLA bottles to withstand HPP conditions as well as PET bottles. Quantification of total mesophilic bacterial and fungal load suggested HPP treatment can be effectively applied as an alternative to pasteurization for apple juice packed in PLA bottles since it guarantees microbial stability during at least 28 days of refrigerated storage. The headspace gas level did not change significantly during 28 days of refrigerated storage, irrespective of the bottle material. Color parameters (L*, a*, and b*) of the HPP-treated juice were similar to those of the fresh juice. Irrespective of the packaging type, the total color variation significantly changed during storage, showing an exponential increase in the first 14 days, followed by a steady state until the end of observations. Overall, PLA bottles proved to offer comparable performances to PET both in terms of mechanical resistance and quality maintenance.

In the original publication [...]

The aim of the study was to assess, through a comparative shelf-life test, the suitability of two packaging materials, namely macro-perforated polypropylene (PP MA) and micro-perforated coextruded polypropylene (PP C), for the quality preservation of green asparagus (Asparagus officinalis L. ‘Vegalim’). Quality of spears was evaluated during 30 days at refrigerated storage by monitoring chemical, physical, and enzymatic parameters as well as sensory descriptors. PP C kept headspace composition close to suggested values for fresh green asparagus. Total color difference increased during the storage and it was highly correlated with chlorophyll-a and carotenoids, however, sensory color perception did not change significantly until 22 days of storage. PP C maintained ascorbic acid concentrations close to the initial levels, limited total phenolic compound loss to 24% (45% in PP MA), determined an increase of 72% in fiber content and small changes in lignin value; enzymatic changes were significantly inhibited. Significant sensorial differences were detected after 22 days of storage, with PP C performing better than PP MA. PP C film was confirmed as the best choice, limiting weight loss and maintaining a fresh-like appearance during 30 days of storage, thus allowing an extension in postharvest life.