Explore the vast range of titles available.

Xylan has a main chain consisting of β-1,4-linked xylose residues with diverse substituents. Endoxylanases cleave the xylan chain at cleavage sites determined by the substitution pattern and thus give different oligosaccharide product patterns. Most known endoxylanases belong to glycoside hydrolase (GH) families 10 and 11. These enzymes work well on unsubstituted xylan but accept substituents in certain subsites. The GH11 enzymes are more restricted by substituents, but on the other hand, they are normally more active than the GH10 enzymes on insoluble substrates, because of their smaller size. GH5 endoxylanases accept arabinose substituents in several subsites and require it in the − 1 subsite. This specificity makes the GH5 endoxylanases very useful for degradation of highly arabinose-substituted xylans and for the selective production of arabinoxylooligosaccharides, without formation of unsubstituted xylooligosaccharides. The GH30 endoxylanases have a related type of specificity in that they require a uronic acid substituent in the − 2 subsite, which makes them very useful for the production of uronic acid substituted oligosaccharides. The ability of dietary xylooligosaccharides to function as prebiotics in humans is governed by their substitution patterns. Endoxylanases are thus excellent tools to tailor prebiotic oligosaccharides to stimulate various types of intestinal bacteria and to cause fermentation in different parts of the gastrointestinal tract. Continuously increasing knowledge on the function of the gut microbiota and discoveries of novel endoxylanases increase the possibilities to achieve health-promoting effects.

Diets rich in flavonoids have been related with low obesity rates, which could be related with their potential to inhibit pancreatic lipase, the main enzyme of fat assimilation. Some flavonoids can aggregate in aqueous medium suggesting that the inhibition mechanism could occur on both molecular and colloidal levels. This study investigates the interaction of two flavonoid aggregates, quercetin and epigallocatechin gallate (EGCG), with pancreatic lipase under simplified intestinal conditions. The stability and the morphology of these flavonoid aggregates were studied in four different solutions: Control (water), salt, low lipase concentration and high lipase concentration. Particles were found by optical microscopy in almost all the solutions tested, except EGCG-control. The results show that the precipitation rate decreases for quercetin and increases for EGCG in salt solution and that lipase stabilize quercetin aggregates. In addition, both flavonoids were shown to precipitate together with pancreatic lipase resulting in a sequestering of the enzyme.

Tara gum (TG) is a polysaccharide extracted from the seeds of a South American tree called Tara ( Caesalpinia spinosa ). TG is a galactomannan with many applications in the food industry, mainly as an emulsifier and stabilizer agent. In addition, it is also used in the paper and cosmetic industries. In the present study, we performed a molecular characterization based on chemical composition and physicochemical properties to understand the properties behind TG applications. TG was extracted and purified from Tara seeds distributed in different ecoregions of Bolivia. The monosaccharide composition analysis was determined by high-performance anion-exchange chromatography/pulsed amperometric detection (HPAEC-PAD). At the same time, their molecular characteristics, such as molar mass, root-mean-square radius, hydrodynamic radius, conformation, and densities, were studied by asymmetrical flow field-flow fractionation coupled to multi-angle light scattering refractive index (AF4-MALS-dRI), also the specific refractive index increment (dn/dc) was determined for the first time using AF4 for TG. The results revealed that the gum samples are galactomannans composed of mannose (Man) and galactose (Gal) in a ratio of 3.37 (Man/Gal), with an average molar mass range from 2.460 × 10 7 to 3.699 × 10 7  Da, distributed in a single population. The root-mean-square radius range from 260.4 to 281.6 nm, and dn/dc is 0.1454. The Kratky plots based on 14 scattering angles indicated that the conformation of all samples corresponds to random coil monodisperse, while their gyration radius/hydrodynamic radius ratio (ρ) is high. All these results suggest that the chains have a low branched density, consistent with the Gal/Man composition. To the best of our knowledge, we report for the first time an integrated physicochemical study of TG relevant to developing emulsifier and stabilizer formulations.

Sugarcane processing roughly generates 54 million tonnes sugarcane bagasse (SCB)/year, making SCB an important material for upgrading to value-added molecules. In this study, an integrated scheme was developed for separating xylan, lignin and cellulose, followed by production of xylo-oligosaccharides (XOS) from SCB. Xylan extraction conditions were screened in: (1) single extractions in NaOH (0.25, 0.5, or 1 M), 121 °C (1 bar), 30 and 60 min; (2) 3 × repeated extraction cycles in NaOH (1 or 2 M), 121 °C (1 bar), 30 and 60 min or (3) pressurized liquid extractions (PLE), 100 bar, at low alkalinity (0–0.1 M NaOH) in the time and temperature range 10–30 min and 50–150 °C. Higher concentration of alkali (2 M NaOH) increased the xylan yield and resulted in higher apparent molecular weight of the xylan polymer (212 kDa using 1 and 2 M NaOH, vs 47 kDa using 0.5 M NaOH), but decreased the substituent sugar content. Repeated extraction at 2 M NaOH, 121 °C, 60 min solubilized both xylan (85.6% of the SCB xylan), and lignin (84.1% of the lignin), and left cellulose of high purity (95.8%) in the residuals. Solubilized xylan was separated from lignin by precipitation, and a polymer with β-1,4-linked xylose backbone substituted by arabinose and glucuronic acids was confirmed by FT-IR and monosaccharide analysis. XOS yield in subsequent hydrolysis by endo-xylanases (from glycoside hydrolase family 10 or 11) was dependent on extraction conditions, and was highest using xylan extracted by 0.5 M NaOH, (42.3%, using Xyn10A from Bacillus halodurans), with xylobiose and xylotriose as main products. The present study shows successful separation of SCB xylan, lignin, and cellulose. High concentration of alkali, resulted in xylan with lower degree of substitution (especially reduced arabinosylation), while high pressure (using PLE), released more lignin than xylan. Enzymatic hydrolysis was more efficient using xylan extracted at lower alkaline strength and less efficient using xylan obtained by PLE and 2 M NaOH, which may be a consequence of polymer aggregation, via remaining lignin interactions.

Abstract This study assesses halophilic archaea’s phylogenetic diversity in southern Tunisia’s geothermal water. In the arid southern regions, limited surface freshwater resources make geothermal waters a vital source for oases and greenhouse irrigation. Three samples, including water, sediment, and halite soil crust, were collected downstream of two geothermal springs of the Ksar Ghilane (KGH) and Zaouet Al Aness (ZAN) oases, Tunisia. The samples were subjected to 16S rRNA gene sequencing using the Illumina Miseq sequencing approach. Several haloarchaea were identified in the geothermal springs. The average taxonomic composition revealed that 20 out of 33 genera were shared between the two geothermal sources, with uneven distribution, where the Halogranum genus was the most represented genus with an abundance of 18.9% and 11.58% for ZAW and KGH, respectively. Several unique site-specific genera were observed: Halonotius, Halopelagius, Natronorubrum, and Haloarcula in ZAN, and Haloprofundus, Halomarina, Halovivax, Haloplanus, Natrinema, Halobium, Natronoarchaeum, and Haloterrigena in the KGH pool. Most genus members are typically found in low-salinity ecosystems. These findings suggest that haloarchaea can disperse downstream from geothermal sources and may survive temperature and chemical fluctuations in the runoff. Metataxonomic analysis reveals diverse communities of halophilic archaea in two geothermal oases in the southern Tunisian Sahara, highlighting their resilience to extreme environmental conditions.

The importance of the gut microbiota in human health has led to an increased interest to study probiotic bacteria. Fermented food is a source of already established probiotics, but it also offers an opportunity to discover new taxa. Four strains of Weissella sp. isolated from Indian fermented food have been genome sequenced and classified into the species W. cibaria based on whole-genome phylogeny. The genome of W. cibaria strain 92, known to utilise xylooligosaccharides and produce lactate and acetate, was analysed to identify genes for oligosaccharide utilisation. Clusters including genes involved in transportation, hydrolysis and metabolism of xylooligosaccharides, arabinooligosaccharides and β-glucosides were identified. Growth on arabinobiose and laminaribiose was detected. A 6-phospho-β-glucosidase clustered with a phosphotransferase system was found upregulated during growth on laminaribiose, indicating a mechanism for laminaribiose utilisation. The genome of W. cibaria strain 92 harbours genes for utilising the phosphoketolase pathway for the production of both acetate and lactate from pentose and hexose sugars but lacks two genes necessary for utilising the pentose phosphate pathway. The ability of W. cibaria strain 92 to utilise several types of oligosaccharides derived from dietary fibres, and produce lactate and acetate makes it interesting as a probiotic candidate for further evaluation.

One of the indispensable applications of lipases in modification of oils and fats is the possibility to tailor the fatty acid content of triacylglycerols (TAGs), to meet specific requirements from various applications in food, nutrition, and cosmetic industries. Oleic acid (C18:1) and stearic acid (C18:0) are two common long fatty acids in the side chain of triglycerides in plant fats and oils that have similar chemical composition and structures, except for an unsaturated bond between C9 and C10 in oleic acid. Two lipases from Rhizomucor miehei (RML) and Rhizopus oryzae (ROL), show activity in reactions involving oleate and stearate, and share high sequence and structural identity. In this research, the preference for one of these two similar fatty acid side chains was investigated for the two lipases and was related to the respective enzyme structure. From transesterification reactions with 1:1 (molar ratio) mixed ethyl stearate (ES) and ethyl oleate (EO), both RML and ROL showed a higher activity towards EO than ES, but RML showed around 10% higher preference for ES compared with ROL. In silico results showed that stearate has a less stable interaction with the substrate binding crevice in both RML and ROL and higher tendency to freely move out of the substrate binding region, compared with oleate whose structure is more rigid due to the existence of the double bond. However, Trp88 from RML which is an Ala at the identical position in ROL shows a significant stabilization effect in the substrate interaction in RML, especially with stearate as a ligand.

In this work, asymmetrical flow field-flow fractionation (AF4) coupled with UV/Vis, multi-angle light scattering (MALS), and differential refractive index (dRI) detectors (AF4-UV-MALS-dRI) was employed for analysis of glutamate decarboxylase (LbGadB) from Lactobacillus brevis (L. brevis). AF4 provided molecular weight (MW) (or size)-based separation of dimer, hexamer, and aggregates of LbGadB. The effect of pH on oligomerization of LbGadB was investigated, and then AF4 results were compared to those from molecular modeling. The MWs measured by AF4-UV-MALS-dRI for dimeric and hexameric forms of LbGadB were 110 and 350 kDa, respectively, which are in good agreements with those theoretically calculated (110 and 330 kDa). The molecular sizes determined by AF4-UV-MALS-dRI were also in good agreement with those obtained from molecular modeling (6 and 10 nm, respectively, for dimeric and hexameric from AF4-UV-MALS-dRI and 6.4 × 7.6 and 7.6 × 13.1 nm from molecular modeling). The effects of temperature, salt type, and salt concentration on oligomerization of LbGadB were also investigated using dynamic light scattering (DLS). It was found that the hexameric form of LbGadB was most stable at pH 6 and in presence of NaCl or KCl. The results indicate that AF4, in combination of various online detectors mentioned above, provides an effective tool for monitoring of oligomerization of LbGadB under different conditions, such as temperature, pH, type of salts, and salt concentrations.

The genome of Rhodothermus marinus DSM 4253 encodes six glycoside hydrolases (GH) classified under GH family 3 (GH3): Rm Bgl3A, Rm Bgl3B, Rm Bgl3C, Rm Xyl3A, Rm Xyl3B and Rm Nag3. The biochemical function, modelled 3D-structure, gene cluster and evolutionary relationships of each of these enzymes were studied. The six enzymes were clustered into three major evolutionary lineages of GH3: β- N -acetyl-glucosaminidases, β-1,4-glucosidases/β-xylosidases and macrolide β-glucosidases. The Rm Nag3 with additional β-lactamase domain clustered with the deepest rooted GH3-lineage of β- N -acetyl-glucosaminidases and was active on acetyl-chitooligosaccharides. Rm Bgl3B displayed β-1,4-glucosidase activity and was the only representative of the lineage clustered with macrolide β-glucosidases from Actinomycetes. The β-xylosidases, Rm Xyl3A and Rm Xyl3B, and the β-glucosidases Rm Bgl3A and Rm Bgl3C clustered within the major β-glucosidases/β-xylosidases evolutionary lineage. Rm Xyl3A and Rm Xyl3B showed β-xylosidase activity with different specificities for para -nitrophenyl ( p NP)-linked substrates and xylooligosaccharides. Rm Bgl3A displayed β-1,4-glucosidase/β-xylosidase activity while Rm Bgl3C was active on p NP-β-Glc and β-1,3-1,4-linked glucosyl disaccharides. Putative polysaccharide utilization gene clusters were also investigated for both R. marinus DSM 4253 and DSM 4252 T (homolog strain). The analysis showed that in the homolog strain DSM 4252 T Rmar_1080 ( Rm Xyl3A) and Rmar_1081 ( Rm Xyl3B) are parts of a putative polysaccharide utilization locus (PUL) for xylan utilization.

Halophilic archaea are polyextremophiles with the ability to withstand fluctuations in salinity, high levels of ultraviolet radiation, and oxidative stress, allowing them to survive in a wide range of environments and making them an excellent model for astrobiological research. Natrinema altunense 4.1R is a halophilic archaeon isolated from the endorheic saline lake systems, Sebkhas, located in arid and semi-arid regions of Tunisia. It is an ecosystem characterized by periodic flooding from subsurface groundwater and fluctuating salinities. Here, we assess the physiological responses and genomic characterization of N. altunense 4.1R to UV-C radiation, as well as osmotic and oxidative stresses. Results showed that the 4.1R strain is able to survive up to 36% of salinity, up to 180 J/m2 to UV-C radiation, and at 50 mM of H2O2, a resistance profile similar to Halobacterium salinarum, a strain often used as UV-C resistant model. In order to understand the genetic determinants of N. altunense 4.1R survival strategy, we sequenced and analyzed its genome. Results showed multiple gene copies of osmotic stress, oxidative stress, and DNA repair response mechanisms supporting its survivability at extreme salinities and radiations. Indeed, the 3D molecular structures of seven proteins related to responses to UV-C radiation (excinucleases UvrA, UvrB, and UvrC, and photolyase), saline stress (trehalose-6-phosphate synthase OtsA and trehalose-phosphatase OtsB), and oxidative stress (superoxide dismutase SOD) were constructed by homology modeling. This study extends the abiotic stress range for the species N. altunense and adds to the repertoire of UV and oxidative stress resistance genes generally known from haloarchaeon.