Explore the vast range of titles available.

Converting the lignin into value-added chemicals and fuels represents a promising way to upgrade lignin. Here, we present an effective electrocatalytic approach that simultaneously modulates the depolymerization and hydrogenation pathways of lignin model compounds within a single reaction system. By fine-tuning the pH of the electrolyte, we achieve a remarkable shift in product selectivity, from acetophenone (with selectivity >99%) to 1-phenylethanol (with selectivity >99%), while effectively preventing over-hydrogenation. The robust metallic glass (MG) catalyst, endowed with an amorphous structure, demonstrates high stability, activity, and full recyclability across over 100 consecutive cycles in ionic liquid electrolytes. The relatively strong affinity of the MG catalyst for the substrate during the initial reaction stage, in conjunction with its weaker binding to the phenolic product, as the reaction progresses, creates a delicate balance that optimizes substrate adsorption and product desorption, which is pivotal in driving the cascade hydrogenation process of acetophenone. This work opens versatile pathways for lignin upgrading through integrated tandem reactions and expands the scope of catalyst design with amorphous structures. Lignin valorization has long been hindered by the challenge of precisely controlling product selectivity. Here, the authors construct a robust electrocatalytic system that enables pH-driven switching between depolymerization and hydrogenation pathways with high selectivity.

With the frequent occurrence of oil spill accidents and the continuous discharge of oily water during oil production and transportation, effective oil removal from environmental water by adsorption still faces severe challenges. Here, a novel absorbent hydroxofluorographene-coated melamine foam, namely G(OH)F@MF, with high affinity to oils was fabricated via stepwise assembly. The G(OH)F@MF absorbent achieved effective removal of various oils within 1 min with relatively high adsorption capacities for petrol (89.34 g/g), lubricating oil (89.60 g/g), and peanut oil (104.79 g/g). Furthermore, it could be regenerated by simply squeezing and reused for more than 10 times with an adsorption capacity exceeding 37.12 g/g. In addition, the results indicated that the G(OH)F@MF absorbent was suitable for oil cleanup at a wide range of pH values (4–12) and temperatures (5–45 °C). The adsorption performance of the material was stable in the presence of natural organic matter and even in different water environments. This study can provide a novel sorbent and method for the green, rapid, recyclable, and stable removal of oils from environmental water.

Heavy metal contamination in the water body is a distinctly important issue for the water security of the reservoir. 114 sediment samples of Changzhao Reservoir were collected to investigate the spatial (horizontal and vertical) distribution characteristics, risk assessment, and source identification of heavy metals. The concentrations of heavy metals at the surface layer of sediment were slightly higher compared with that at the middle and bottom layer sediment in the most sampling sites. The concentration of Zn and Cd was significantly different in the different depths of sediment ( P ≤ 0.01, Tukey HSD test). pH and Cd were identified as the key factors for TOC in the sediment by the Boruta algorithm. The proportion of “uncontaminated to moderately contaminated” for Cd, Zn, and As in the surface layer was 84.21%, 47.37%, and 34.21%, which indicated that the quality of sediment was mostly impacted by Cd, Zn, and As. The agricultural non-point source pollution is dominant according to the source identification method of APCS-MLR. Overall, this paper presents the distribution and conversion trends of heavy metals and provides the insights of the reservoir protection in the future work.

Electrocatalytic depolymerization of lignin into value-added chemicals offers a promising technique to make biorefining sustainable. Herein, we report a robust trimetallic PdNiBi electrocatalyst for reductive C-O bond cleavage of different lignin model dimers and oxidized lignin under mild conditions. The reduction reaction proceeds with complete substrate conversion and excellent yields toward monomers of phenols (80%–99%) and acetophenones (75%–96%) in the presence of an ionic liquid electrolyte with operational stability. Systematic experimental investigations together with density functional theory (DFT) calculations reveal that the outstanding performance of the catalyst results from the synergistic effect of the metal elements, which facilitates the easier formation of a key C α radical intermediate and the facile desorption of the as-formed products at the electrode. The results open up new opportunities for lignin valorization through the green electrocatalytic approach.

Background Metastasis is the leading cause of mortality in human cancers, including esophageal squamous cell carcinoma (ESCC). As a pro-inflammatory cytokine, IL-32 was reported to be a poor prognostic factor in many cancers. However, the role of IL-32 in ESCC metastasis remains unknown. Methods ESCC cells with ectopic expression or knockdown of IL-32 were established and their effects on cell motility were detected. Ultracentrifugation, Transmission electron microscopy and Western blot were used to verify the existence of extracellular vesicle IL-32 (EV-IL-32). Coculture assay, immunofluorescence, flow cytometry, and in vivo lung metastasis model were performed to identify how EV-IL-32 regulated the crosstalk between ESCC cells and macrophages. Results Here, we found that IL-32 was overexpressed and positively correlated to lymph node metastasis of ESCC. IL-32 was significantly higher in the tumor nest compared with the non-cancerous tissue. We found that IL-32β was the main isoform and loaded in EV derived from ESCC cells. The shuttling of EV-IL-32 derived from ESCC cells into macrophages could promote the polarization of M2 macrophages via FAK-STAT3 pathway. IL-32 overexpression facilitated lung metastasis and was positively correlated with the proportion of M2 macrophages in tumor microenvironment. Conclusions Taken together, our results indicated that EV-IL-32 derived from ESCC cell line could be internalized by macrophages and lead to M2 macrophage polarization via FAK-STAT3 pathway, thus promoting the metastasis of ESCC. These findings indicated that IL-32 could serve as a potential therapeutic target in patients with ESCC.

Aspergillus flavus and Aflatoxins in grain crops give rise to a serious threat to food security and cause huge economic losses. In particular, aflatoxin B1 has been identified as a Class I carcinogen to humans by the International Agency for Research on Cancer (IARC). Compared with conventional methods, Surface-Enhanced Raman Scattering (SERS) has paved the way for the detection of Aspergillus flavus and Aflatoxins in grain crops as it is a rapid, nondestructive, and sensitive analytical method. In this work, the rapid detection of Aspergillus flavus and quantification of Aflatoxin B1 in grain crops were performed by using a portable Raman spectrometer combined with colloidal Au nanoparticles (AuNPs). With the increase of the concentration of Aspergillus flavus spore suspension in the range of 102–108 CFU/mL, the better the combination of Aspergillus flavus spores and AuNPs, the better the enhancement effect of AuNPs solution on the Aspergillus flavus. A series of different concentrations of aflatoxin B1 methanol solution combined with AuNPs were determined based on SERS and their spectra were similar to that of solid powder. Moreover, the characteristic peak increased gradually with the increase of concentration in the range of 0.0005–0.01 mg/L and the determination limit was 0.0005 mg/L, which was verified by HPLC in ppM concentration. This rapid detection method can greatly shorten the detection time from several hours or even tens of hours to a few minutes, which can help to take effective measures to avoid causing large economic losses.

Immunotherapy has revolutionized the oncology treatment paradigm, and CAR-T cell therapy in particular represents a significant milestone in treating hematological malignancies. Nevertheless, tumor resistance due to target heterogeneity or mutation remains a Gordian knot for immunotherapy. This review elucidates molecular mechanisms and therapeutic potential of next-generation immunotherapeutic tools spanning genetically engineered immune cells, multi-specific antibodies, and cell engagers, emphasizing multi-targeting strategies to enhance personalized immunotherapy efficacy. Development of logic gate modulation-based circuits, adapter-mediated CARs, multi-specific antibodies, and cell engagers could minimize adverse effects while recognizing tumor signals. Ultimately, we highlight gene delivery, gene editing, and other technologies facilitating tailored immunotherapy, and discuss the promising prospects of artificial intelligence in gene-edited immune cells.

2D transition metal borides (MBenes) with abundant surface terminals hold great promise in molecular sensing applications. However, MBenes from etching with fluorine‐containing reagents present inert ‐fluorine groups on the surface, which hinders their sensing capability. Herein, the multilayer fluorine‐free MoBTx MBene (where Tx represents O, OH, and Cl) with hydrophilic structure is prepared by a hydrothermal‐assisted hydrochloric acid etching strategy based on guidance from the first‐principle calculations. Significantly, the fluorine‐free MoBTx‐based humidity sensor is fabricated and demonstrates low resistance and excellent humidity performance, achieving a response of 90% to 98%RH and a high resolution of 1%RH at room temperature. By combining the experimental results with the first‐principles calculations, the interactions between MoBTx and H2O, including the adsorption and intercalation of H2O, are understood first in depth. Finally, the portable humidity early warning system for real‐time monitoring and early warning of infant enuresis and back sweating illustrates its potential for humidity sensing applications. This work not only provides guidance for preparation of fluorine‐free MBenes, but also contributes to advancing their exploration in sensing applications. A simpler and safer hydrothermal‐assisted HCl etching strategy is utilized to successfully prepare multilayer fluorine‐free hydrophilic MoBTx MBene. The multilayer hydrophilic structure with oxygen functional terminals is verified by first‐principles calculations and experimental characterization. It is demonstrated that surface physical adsorption and physical intercalation of water molecules are the main mechanisms of MoBTx‐based humidity sensors.

Background Mastering the spatial distribution and planting area of paddy can provide a scientific basis for monitoring rice production, and planning grain production layout. Previous remote sensing studies on paddy concentrated in the plain areas with large-sized fields, ignored the fact that rice is also widely planted in vast hilly regions. In addition, the land cover types here are diverse, rice fields are characterized by a scattered and fragmented distribution with small- or medium-sized, which pose difficulties for high-precision rice recognition. Methods In the paper, we proposed a solution based on Sentinel-1 SAR, Sentinel-2 MSI, DEM, and rice calendar data to focus on the rice fields identification in hilly areas. This solution mainly included the construction of rice feature dataset at four crucial phenological periods, the generation of rice standard spectral curve, and the proposal of spectral similarity algorithm for rice identification. Results The solution, integrating topographical and rice phenological characteristics, manifested its effectiveness with overall accuracy exceeding 0.85. Comparing the results with UAV, it presented that rice fields with an area exceeding 400 m 2 (equivalent to 4 pixels) exhibited a recognition success rate of over 79%, which reached to 89% for fields exceeding 800 m 2 . Conclusions The study illustrated that the proposed solution, integrating topographical and rice phenological characteristics, has the capability for charting various rice field sizes with fragmented and dispersed distribution. It also revealed that the synergy of Sentinel-1 SAR and Sentinel-2 MSI data significantly enhanced the recognition ability of rice paddy fields ranging from 400 m 2 to 2000 m 2 .

In 2022, new guidelines for the diagnosis and treatment of pulmonary hypertension (PH) revised the hemodynamic definition, reducing the mean pulmonary artery pressure threshold from ≥ 25 to > 20 mmHg. The optimal threshold of transthoracic echocardiography (TTE) parameters and the predictive capability require further validation. This study aims to investigate the diagnostic value of TTE parameters under the new hemodynamic criteria. Retrospective analysis of PH patients who underwent right heart catheterization and TTE examination between 2017 and 2022 in a single center. Logistic regression was employed to ascertain the predictive capacity of parameters across various conditions. Receiver operating characteristic curves were used to determine the optimal cutoff values based on the new criteria. In a cohort of 213 patients, the optimal cutoff values identified were a tricuspid annular plane systolic excursion (TAPSE) to systolic pulmonary arterial pressure (sPAP) ratio of < 0.50 mm/mmHg, a right ventricular outflow tract acceleration time (RVOT-AT) of < 93 ms, and a right atrial area (RAA) > of 14.5 cm . Regardless of the inclusion of tricuspid regurgitation velocity (TRV) and related parameters, RVOT-AT < 93 ms manifested as an effective predictive parameter. A combination of RVOT-AT < 93 ms, main pulmonary artery diameter > 25 mm and RAA > 14.5 cm exhibited better specificity. The threshold values for TAPSE/sPAP, RVOT-AT, and RAA should be adjusted to improve the predictive capacity of PH based on revised criteria in this single-center dataset. RVOT-AT was a promising indirect parameter, and the utilization of combined indirect indicators may enhance diagnostic accuracy, particularly in instances where satisfactory TRV measurements are unavailable.