Explore the vast range of titles available.

The discovery of slow earthquakes has revolutionized the field of earthquake seismology. Defining the locations of these events and the conditions that favor their occurrence provides important insights into the slip behavior of tectonic faults. We report on a family of recurring slow-slip events (SSEs) on the plate interface immediately seaward of repeated historical moment magnitude (M w) 8 earthquake rupture areas offshore of Japan. The SSEs continue for days to several weeks, include both spontaneous and triggered slip, recur every 8 to 15 months, and are accompanied by swarms of low-frequency tremors. We can explain the SSEs with 1 to 4 centimeters of slip along the megathrust, centered 25 to 35 kilometers (km) from the trench (4 to 10 km depth). The SSEs accommodate 30 to 55% of the plate motion, indicating frequent release of accumulated strain near the trench.

This study used numerical tests and in situ observations to characterize the relationship between ground motion and strain measured using a newly developed borehole fiber-optic strainmeter with a helically wound sensor. This strainmeter is designed for the broadband observations across geodetic and seismic ranges, featuring a sensor fiber helically wound to accommodate a long baseline within the confined space of a borehole, thereby enhancing the sensitivity to multiple components of strain tensors. Therefore, the sensitivity of the strain tensor and its relationship with ground velocity were analyzed through numerical tests and compared with in situ records. The sensitivities of specific components within the strain tensor were evaluated based on the geometrical configuration of the sensor, revealing that areal and normal strains in the horizontal plane were particularly sensitive in these borehole fiber-optic strainmeters. To validate these theoretical characteristics, in situ records from the borehole fiber-optic strainmeter were comparatively analyzed with data from existing linear strainmeters and seismometers. The borehole fiber-optic strainmeter was installed in a 20-m-deep borehole at the Kamioka Mine in central Japan in March 2023. The strain and velocity measurements were concurrently conducted using a collocated linear strainmeter and a broadband seismometer, utilizing the P- and S-phases of teleseismic and local earthquakes as comparative signals. This comparison confirmed the sensitivity to areal and normal strains detected by the linear strainmeter. Additionally, the sensitivity of the strainmeter to strain in various directions was assessed by comparison with a seismometer. These analyses also indicated that the contrast in elastic properties between the strainmeter sensor and the surrounding rocks affected the scaling of the strain amplitude in situ. Moreover, the inhomogeneity of the surrounding media induced variations in strain amplitudes, especially in the shear waves. Graphical Abstract

In this study, geodetic and seismic phenomena occurring in the subduction zone were observed with two tiltmeters that were installed in seafloor boreholes drilled in the Kumano Basin in the Nankai Trough, southwest Japan. We used one electrolytic-type tiltmeter and one pendulum-type tiltmeter installed 6 and 19 m below the seafloor, respectively. The two tiltmeters have been continuously operated since 2019 and 2021, respectively. The records of the two tiltmeters showed microseisms, seismic signals of normal earthquakes, and variations that correlated well with the M2 tide (tidal response). The noise environment relative to existing seafloor observatories was assessed by comparing the power spectral densities of the tiltmeters and broadband seismometers in the seismic frequency band. The two tiltmeters and the seismometers showed similar spectral peaks in the microseism band, and at lower frequencies below 10–2 Hz, the pendulum tiltmeter had a noise level that was up to 20 dB lower than that of the broadband seismometers. The tidal responses of the tiltmeters were analyzed to reveal corresponding mechanisms because a large amplitude of the tidal response makes it difficult to detect geodetic phenomena. Considerable azimuthal dependence was observed in the NW–SE direction for both tiltmeters. The principal direction was approximately the same as the down-slope direction of the local bathymetry. This tendency was thus interpreted to be caused by the differences in the thickness of the sedimentary layer along the direction of the slope. Furthermore, the validity of the tilt measurements for the two tiltmeters was demonstrated by in-situ loading experiments, where the theoretical response of an elastic half-space medium was computed and compared with the experimental results. The results of the loading experiments can be explained using theoretical values with a set of realistic elastic moduli.

An unusual combination of a laboratory experiment and in situ measurement of pressure fluctuations during an earthquake allows us to resolve some uncertainties in bottom pressure recorders (BPRs). In situ BPRs are usually contaminated by seismic waves during earthquakes; thus uncertainty still remains in the data obtained from BPRs. We examine in situ BPR data together with pressure variations produced by a dead weight (a pressure standard) in a laboratory experiment during an earthquake. The features recorded by the in situ BPRs are analysed as part of the overall experiment. We demonstrated that a 10-kg dead weight on a piston-cylinder across an area of 10 mm 2 is capable of reproducing pressure fluctuations at a depth of 1000 m in the water column. The experiment also indicates that the internal mechanics of BPRs are isolated from incident seismic waves, suggesting that BPRs measure true in situ pressures without instrumentally induced disturbances. This constitutes the first instance in which pressure fluctuations recorded by in situ BPRs during an earthquake were reproduced using a pressure standard in the laboratory.

The 2011 off the Pacific coast of Tohoku Earthquake occurred at the plate boundary between the Pacific plate and the landward plate on March 11, 2011, and had a magnitude of 9. Many aftershocks occurred following the mainshock. Obtaining a precise aftershock distribution is important for understanding the mechanism of earthquake generation. In order to study the aftershock activity of this event, we carried out extensive sea-floor aftershock observations using more than 100 ocean-bottom seismometers just after the mainshock. A precise aftershock distribution for approximately three months over the whole source area was obtained from the observations. The aftershocks form a plane dipping landward over the whole area, nevertheless the epicenter distribution is not uniform. Comparing seismic velocity structures, there is no aftershock along the plate boundary where a large slip during the mainshock is estimated. Activity of aftershocks in the landward plate in the source region was high and normal fault-type, and strike-slip-type, mechanisms are dominant. Within the subducting oceanic plate, most earthquakes have also a normal fault-type, or strike-slip-type, mechanism. The stress fields in and around the source region change as a result of the mainshock.

The Japanese islands are positioned near the subduction zones, and large earthquakes have repeatedly occurred in marine areas around Japan. However, the number of permanent earthquake observatories in the oceans is quite limited. It is important for understanding generation of large earthquakes to observe seismic activities on the seafloor just above these seismogenic zones. An ocean bottom cabled seismometer (OBCS) is the best solution because data can be collected in real-time. We have developed a new compact OBCS system. A developed system is controlled by a microprocessor, and signals from accelerometers are 24-bit digitized. Clock is delivered from the global positioning system receiver on a landing station using a simple dedicated line. Data collected at each cabled seismometer (CS) are transmitted using standard Internet Protocol to landing stations. The network configuration of the system adopts two dual methods. We installed the first practical OBCS system in the Japan Sea, where large earthquakes occurred in past. The first OBCS system has a total length of 25 km and 4 stations with 5 km interval. Installation was carried out in August 2010. The CSs and single armored optical submarine cable were buried 1 m below the seafloor to avoid a conflict with fishing activity. The data are stored on a landing station and sent to Earthquake Research Institute, University of Tokyo by using the Internet. After the installation, data are being collected continuously. According to burial of the CSs, seismic ambient noises are smaller than those observed on seafloor.

The Chuetsu-Oki Earthquake occurred on July 16, 2007. To understand the mechanism of earthquake generation, it is important to obtain a detailed seismic activity. Since the source region of the 2007 Chuetsu-oki Earthquake lies mainly offshore of Chuetsu region, a central part of Niigata Prefecture, it is difficult to estimate the geometry of faults using only the land seismic network data. A precise aftershock distribution is essential to determine the fault geometry of the mainshock. To obtain the detailed aftershock distribution of the 2007 Chuetsu-oki Earthquake, 32 Ocean Bottom Seismometers (OBSs) were deployed from July 25 to August 28 in and around the source region of the mainshock. In addition, a seismic survey using airguns and OBSs was carried out during the observation to obtain a seismic velocity structure below the observation area for precise hypocenter determination. Seven hundred and four aftershocks were recorded with high spatial resolution during the observation period using OBSs, temporally installed land seismic stations, and telemetered seismic land stations and were located using the double-difference method. Most of the aftershocks occurred in a depth range of 6–15 km, which corresponds to the 6-km/s layer. From the depth distribution of the hypocenters, the aftershocks occurred along a plane dipping to the southeast in the whole aftershock region. The dip angle of this plane is approximately 40°. This single plane with a dip to the southeast is considered to represent the fault plane of the mainshock. The regions where few aftershocks occurred are related to the asperities where large slip is estimated from the data of the mainshock. The OBS observation is indispensable to determine the precise depths of events which occur in offshore regions even close to a coast.

The 2011 off the Pacific coast of Tohoku Earthquake occurred offshore of northeast Japan region on March 11th, 2011. In order to study the aftershock activity of this event, we started deployment of seventy-two ocean bottom seismometers (OBSs) four days after the mainshock. In the south of the source region, thirty-four longterm OBSs (LT-OBSs) had been deployed before the occurrence of the mainshock, and we recovered three LT-OBSs to clarify the depth distribution of aftershocks. Using the data of OBSs, ninety-nine aftershocks were located. Most of the aftershocks were located in a depth range of 5–30 km and concentrate in the plate boundary region. In addition, aftershocks occurred within the subducting oceanic crust and the 6.2-km/s layer of the landward plate. No aftershocks were found in the mantle of the subducting plate. From the results of a previous seismic survey using OBSs and controlled sources, the subducting Philippine Sea plate is estimated to be in contact with the subducting Pacific plate. The southern end of the seismic activity region of the aftershocks corresponds to the contact region of two subducting plates. We infer that the rupture of the mainshock sequence was terminated at the oceanic plate contact region.