Explore the vast range of titles available.

Around the globe, innovation with integrating information and communication technologies (ICT) with physical infrastructure is a top priority for governments in pursuing smart, green living to improve energy efficiency, protect the environment, improve the quality of life, and bolster economy competitiveness. Cities today faces multifarious challenges, among which energy efficiency of homes and residential dwellings is a key requirement. Achieving it successfully with the help of intelligent sensors and contextual systems would help build smart cities of the future. In a Smart home environment Home Energy Management plays a critical role in finding a suitable and reliable solution to curtail the peak demand and achieve energy conservation. In this paper, a new method named as Home Energy Management as a Service (HEMaaS) is proposed which is based on neural network based Q-learning algorithm. Although several attempts have been made in the past to address similar problems, the models developed do not cater to maximize the user convenience and robustness of the system. In this paper, authors have proposed an advanced Neural Fitted Q-learning method which is self-learning and adaptive. The proposed method provides an agile, flexible and energy efficient decision making system for home energy management. A typical Canadian residential dwelling model has been used in this paper to test the proposed method. Based on analysis, it was found that the proposed method offers a fast and viable solution to reduce the demand and conserve energy during peak period. It also helps reducing the carbon footprint of residential dwellings. Once adopted, city blocks with significant residential dwellings can significantly reduce the total energy consumption by reducing or shifting their energy demand during peak period. This would definitely help local power distribution companies to optimize their resources and keep the tariff low due to curtailment of peak demand.

Mesoporous bioactive nanoparticles (MBNs) have been developed as promising additives to various types of bone or dentin regenerative material. However, biofunctionality of MBNs as dentin regenerative additive to dental materials have rarely been studied. We investigated the uptake efficiency of MBNs-NH2 with their endocytosis pathway and the role of MBNs-NH2 in odontogenic differentiation to clarify inherent biofunctionality. MBNs were fabricated by sol-gel synthesis, and 3% APTES was used to aminate these nanoparticles (MBNs-NH2) to reverse their charge from negative to positive. To characterize the MBNs-NH2, TEM, XRD, FTIR, zeta(ξ)-potential measurements, and Brunauer-Emmett-Teller analysis were performed. After primary cultured rat dental pulp stem cells (rDPSCs) were incubated with various concentrations of MBNs-NH2, stem cell viability (24 hours) with or without differentiated media, internalization of MBNs-NH2 in rDPSCs (~4 hours) via specific endocytosis pathway, intra or extracellular ion concentration and odontoblastic differentiation (~28 days) were investigated. Incubation with up to 50 μg/mL of MBNs-NH2 had no effect on rDPSCs viability with differentiated media (p>0.05). The internalization of MBNs-NH2 in rDPSCs was determined about 92% after 4 hours of incubation. Uptake was significantly decreased with ATP depletion and after 1 hour of pre-treatment with the inhibitor of macropinocytosis (p<0.05). There was significant increase of intracellular Ca and Si ion concentration in MBNs-NH2 treated cells compared to no-treated counterpart (p<0.05). The expression of odontogenic-related genes (BSP, COL1A, DMP-1, DSPP, and OCN) and the capacity for biomineralization (based on alkaline phosphatase activity and alizarin red staining) were significantly upregulated with MBNs-NH2. These results indicate that MBNs-NH2 induce odontogenic differentiation of rDPSCs and may serve as a potential dentin regenerative additive to dental material for promoting odontoblast differentiation.

Significant research and development in the field of biomedical implants has evoked the scope to treat a broad range of orthopedic ailments that include fracture fixation, total bone replacement, joint arthrodesis, dental screws, and others. Importantly, the success of a bioimplant depends not only upon its bulk properties, but also on its surface properties that influence its interaction with the host tissue. Various approaches of surface modification such as coating of nanomaterial have been employed to enhance antibacterial activities of a bioimplant. The modified surface facilitates directed modulation of the host cellular behavior and grafting of cell-binding peptides, extracellular matrix (ECM) proteins, and growth factors to further improve host acceptance of a bioimplant. These strategies showed promising results in orthopedics, e.g., improved bone repair and regeneration. However, the choice of materials, especially considering their degradation behavior and surface properties, plays a key role in long-term reliability and performance of bioimplants. Metallic biomaterials have evolved largely in terms of their bulk and surface properties including nano-structuring with nanomaterials to meet the requirements of new generation orthopedic bioimplants. In this review, we have discussed metals and metal alloys commonly used for manufacturing different orthopedic bioimplants and the biotic as well as abiotic factors affecting the failure and degradation of those bioimplants. The review also highlights the currently available nanomaterial-based surface modification technologies to augment the function and performance of these metallic bioimplants in a clinical setting.

Spinal cord injury (SCI) produces excess reactive oxygen species (ROS) that can exacerbate secondary injury and lead to permanent functional impairment. Hypothesizing that cerium oxide nanoparticles (CONPs) as an effective ROS scavenger may offset this damaging effect, it is first demonstrated in vitro that CONPs suppressed inducible nitric oxide synthase (iNOS) generation and enhanced cell viability of hydrogen peroxide (H2O2)‐insulted cortical neurons. Next, CONPs are administered at various does (50–4000 µg mL−1) to a contused spinal cord rat model and monitored the disease progression for up to eight weeks. At one day postinjury, the number of iNOS+ cells decreases in the treated groups compared with the control. At one week, the cavity size and inflammatory cells are substantially reduced, and the expression of proinflammatory and apoptotic molecules is downregulated with a concurrent upregulation of anti‐inflammatory cytokine. By eight weeks, the treated groups show significantly improved locomotor functions compared with the control. This study shows for the first time that injection of optimal‐dosed CONPs alone into contusion‐injured spinal cord of rats can reduce ROS level, attenuate inflammation and apoptosis, and consequently help locomotor functional recovery, adding a promising and complementary strategy to the other treatments of acute SCI. Cerium oxide nanoparticles directly injected to contused spinal cord of rats at optimal doses (250–1000 µg mL−1) significantly improve the functional recovery by downregulating inflammatory and apoptotic signals and the upregulation of neuronal regeneration.

Bone/cartilage interfacial tissue engineering needs to satisfy the differential properties and architectures of the osteochondral region. Therefore, biphasic or multiphasic scaffolds that aim to mimic the gradient hierarchy are widely used. Here, we find that two differently structured (topographically) three-dimensional scaffolds, namely, “dense” and “nanofibrous” surfaces, show differential stimulation in osteo- and chondro-responses of cells. While the nanofibrous scaffolds accelerate the osteogenesis of mesenchymal stem cells, the dense scaffolds are better in preserving the phenotypes of chondrocytes. Two types of porous scaffolds, generated by a salt-leaching method combined with a phase-separation process using the poly(lactic acid) composition, had a similar level of porosity (~90%) and pore size (~150 μm). The major difference in the surface nanostructure led to substantial changes in the surface area and water hydrophilicity (nanofibrous ≫ dense); as a result, the nanofibrous scaffolds increased the cell-to-matrix adhesion of mesenchymal stem cells significantly while decreasing the cell-to-cell contracts. Importantly, the chondrocytes, when cultured on nanofibrous scaffolds, were prone to lose their phenotype, including reduced chondrogenic expressions (SOX-9, collagen type II, and Aggrecan) and glycosaminoglycan content, which was ascribed to the enhanced cell–matrix adhesion with reduced cell–cell contacts. On the contrary, the osteogenesis of mesenchymal stem cells was significantly accelerated by the improved cell-to-matrix adhesion, as evidenced in the enhanced osteogenic expressions (RUNX2, bone sialoprotein, and osteopontin) and cellular mineralization. Based on these findings, we consider that the dense scaffold is preferentially used for the chondral-part, whereas the nanofibrous structure is suitable for osteo-part, to provide an optimal biphasic matrix environment for osteochondral tissue engineering.

Articular cartilage has limited regeneration capacity, thus significant challenge has been made to restore the functions. The development of hydrogels that can encapsulate and multiply cells, and then effectively maintain the chondrocyte phenotype is a meaningful strategy to this cartilage repair. In this study, we prepared alginate-hyaluronic acid based hydrogel with type I collagen being incorporated, namely Alg-HA-Col composite hydrogel. The incorporation of Col enhanced the chemical interaction of molecules, and the thermal stability and dynamic mechanical properties of the resultant hydrogels. The primary chondrocytes isolated from rat cartilage were cultured within the composite hydrogel and the cell viability recorded revealed active proliferation over a period of 21 days. The mRNA levels of chondrocyte phenotypes, including SOX9, collagen type II, and aggrecan, were significantly up-regulated when the cells were cultured within the Alg-HA-Col gel than those cultured within the Alg-HA. Furthermore, the secretion of sulphated glycosaminoglycan, a cartilage-specific matrix molecule, was recorded higher in the collagen-added composite hydrogel. Although more in-depth studies are required such as the in vivo functions, the currently-prepared Alg-HA-Col composite hydrogel is considered to provide favorable 3-dimensional matrix conditions for the cultivation of chondrocytes. Moreover, the cell-cultured constructs may be useful for the cartilage repair and tissue engineering.

IntroductionObstructive sleep apnea (OSA) represents a sleep-related impairment linked to upper airway function. The question of whether OSA drives obesity or if shared underlying factors contribute to both conditions remains unresolved. Hence, this present study aims to understand the interplay between obstructive sleep apnea syndrome (OSAS) and obesity through in-depth analysis of anthropometric data within control subjects and OSA patients.MethodologyA case-control study was conducted, which included 40 cases and 40 matched healthy controls. Study participants with reported symptoms of snoring, daytime drowsiness, or both were included in the study. All the study participants underwent comprehensive anthropometric assessments such as height, weight, body mass index (BMI), neck circumference, waist circumference, hip circumference, waist-to-hip ratio, skin-fold thickness, and thickness measurements of biceps, triceps, suprailiac, and subscapular muscles.ResultsWithin the OSA group, significant disparities emerged in mean age, waist circumference, waist-to-hip ratio, and diverse fat accumulations encompassing visceral, subcutaneous, trunk, and subcutaneous leg fat. Notably, skin-fold thickness at specific sites - biceps, triceps, subscapula, and suprailiac - demonstrated considerable augmentation relative to the control group. Furthermore, mean values associated with height, weight, BMI, neck circumference, fat percentage, subcutaneous arm fat, entire arm composition, and trunk skeletal muscle either equaled or exceeded those in the control group. However, statistical significance was not attained in these comparisons.ConclusionThis investigation underscored a pronounced correlation between numerous endpoints characterizing OSA patients and markers of obesity. Consequently, addressing altered levels of obesity-linked anthropometric variables through pharmacological interventions might hold promise as a pivotal strategy for improving symptoms associated with OSA.

Background: Several pathogenic conditions leading to morbidity, including cancer, aging, diabetes, reperfusion injury, cardiovascular disease, and neurological disorders, are known to be exacerbated by oxidative stress. Antioxidant therapy is effective in the treatment of such disorders and appears to be a potential therapeutic technique to reduce oxidative stress. The aim of our study is to investigate the antioxidant effects of L-ascorbic acid and nitric oxide (NO) modulators on rats suffering from oxidative stress induced by acute restraint stress (RSx1).Methodology: In this in vivo study, Wistar rats were subjected to one hour of restraint stress on day 21 to induce oxidative stress. Superoxide dismutase (SOD), total antioxidant capacity (TAC), catalase, glutathione (GSH), and malondialdehyde (MDA) were used to assess the antioxidant effects. IBM Corp. Released 2013. IBM SPSS Statistics for Windows, Version 22.0. Armonk, NY: IBM Corp. was used for data analysis.Results: Compared to vehicle groups, acute restraint stress (RSx1) dramatically increased MDA levels while decreasing GSH, SOD, total antioxidant capacity, and catalase. L-NAME, 7-NI, AG (50 mg/kg each), and L-ascorbic acid (200 mg/kg) reversed the changes in SOD, MDA, GSH, total antioxidant capacity, and catalase levels. The NO precursor L-arginine (1000 mg/kg) and NO synthase inhibitors followed the same trend.Conclusion: Our study findings highlight the complex role of antioxidants and NO modulators in the pathogenesis of diseases, as evidenced by the reversal of oxidative stress indicators. Antioxidant therapy, with its potential to mitigate oxidative stress, emerges as a viable treatment option for a range of pathological conditions associated with oxidative stress.

Aim:Lower respiratory tract infection (LRTI) is a serious illness especially in children under 5 years of age. Hyponatremia is the most common electrolyte abnormality seen in hospitalized children. This study aimed to evaluate the correlation between hyponatremia in children admitted to a paediatric ward, in the setting of acute LRTI in different age groups and to determine the association of hyponatremia with different types of acute LRTI in children.Materials and Methods:This study included 231 clinically diagnosed children (1 month to 12 years) with acute LRTI. General examinations and systemic examinations were performed. Laboratory investigations included serum electrolyte level (Na+) and radiological investigations included chest X-ray. The conditions observed in the children included bronchopneumonia (BPN), lobar pneumonia, wheeze-associated LRTI (WALRI), bronchiolitis, and empyema. Statistical analysis was carried out using SPSS 16.0 version. A p-value <0.05 was considered statistically significant.Results:Out of 231 cases, hyponatremia was present in 136 cases (58.9%). Mild, moderate, and severe hyponatremia were present in 83.8%, 13.2%, and 2.9% patients, respectively. Most of the patients with BPN had mild hyponatremia (89%). The prevalence of hyponatremia was significantly higher in children aged 6-10 years [odds ratio (OD)=4.29, 95% confidence interval (CI)=0.90-20.45, p<0.05], females (OR=0.56, 95% CI=0.32-0.96, p=0.03) and cases of empyema (OR=4.49, 95% CI=1.48-13.60, p=0.008).Conclusion:In conclusion, among children hospitalized with LRTI, an older age (6-10 years), being female, and the presence of empyema are significant risk factors for the development of hyponatremia. In such children, serum electrolytes should be regularly measured to prevent adverse clinical outcomes.

BackgroundObstructive sleep apnea (OSA) is characterized by a combination of structural issues in the upper airway and imbalances in the respiratory control system. While numerous studies have linked OSA with obesity, it remains uncertain whether leptin, a hormone associated with fat, plays a role in the functional and anatomical defects that lead to OSA. Therefore, the aim of this study was to investigate whether leptin levels could be used as a predictor of OSA syndrome (OSAS).MethodologyA case-control observational study was conducted, enrolling study participants who reported obesity (BMI > 30) within the range of >30 to <35 kg/m2, along with a short neck and a history of snoring, excessive daytime drowsiness, fatigue, or insomnia. Leptin levels and fasting blood sugar (FBS) were measured in all individuals. Additionally, the study evaluated the severity of OSAS using indicators such as the STOP BANG scores, apnea-hypopnea index, uvula grade score, and Epworth Sleepiness Scale scores.ResultsA total of 80 participants (40 cases and 40 controls) were included in the study. The mean leptin and FBS levels were significantly higher in cases compared to controls. Moreover, leptin levels exhibited a significant correlation with the severity indices of OSAS.ConclusionThe study findings indicate that individuals with higher leptin levels tend to exhibit more severe OSAS symptoms. Furthermore, these elevated leptin levels contribute to the worsening of various OSA symptoms. Larger controlled studies have suggested that pharmacologically restoring the altered leptin levels may serve as a beneficial adjunct to treatment for alleviating OSAS symptoms.