Explore the vast range of titles available.

In this paper, a highly sensitive graphene-based multiple-layer (BK7/Au/PtSe2/Graphene) coated surface plasmon resonance (SPR) biosensor is proposed for the rapid detection of the novel Coronavirus (COVID-19). The proposed sensor was modeled on the basis of the total internal reflection (TIR) technique for real-time detection of ligand-analyte immobilization in the sensing region. The refractive index (RI) of the sensing region is changed due to the interaction of different concentrations of the ligand-analyte, thus impacting surface plasmon polaritons (SPPs) excitation of the multi-layer sensor interface. The performance of the proposed sensor was numerically investigated by using the transfer matrix method (TMM) and the finite-difference time-domain (FDTD) method. The proposed SPR biosensor provides fast and accurate early-stage diagnosis of the COVID-19 virus, which is crucial in limiting the spread of the pandemic. In addition, the performance of the proposed sensor was investigated numerically with different ligand-analytes: (i) the monoclonal antibodies (mAbs) as ligand and the COVID-19 virus spike receptor-binding domain (RBD) as analyte, (ii) the virus spike RBD as ligand and the virus anti-spike protein (IgM, IgG) as analyte and (iii) the specific probe as ligand and the COVID-19 virus single-standard ribonucleic acid (RNA) as analyte. After the investigation, the sensitivity of the proposed sensor was found to provide 183.33°/refractive index unit (RIU) in SPR angle (θSPR) and 833.33THz/RIU in SPR frequency (SPRF) for detection of the COVID-19 virus spike RBD; the sensitivity obtained 153.85°/RIU in SPR angle and 726.50THz/RIU in SPRF for detection of the anti-spike protein, and finally, the sensitivity obtained 140.35°/RIU in SPR angle and 500THz/RIU in SPRF for detection of viral RNA. It was observed that whole virus spike RBD detection sensitivity is higher than that of the other two detection processes. Highly sensitive two-dimensional (2D) materials were used to achieve significant enhancement in the Goos-Hänchen (GH) shift detection sensitivity and plasmonic properties of the conventional SPR sensor. The proposed sensor successfully senses the COVID-19 virus and offers additional (1 + 0.55) × L times sensitivity owing to the added graphene layers. Besides, the performance of the proposed sensor was analyzed based on detection accuracy (DA), the figure of merit (FOM), signal-noise ratio (SNR), and quality factor (QF). Based on its performance analysis, it is expected that the proposed sensor may reduce lengthy procedures, false positive results, and clinical costs, compared to traditional sensors. The performance of the proposed sensor model was checked using the TMM algorithm and validated by the FDTD technique.

RF power is broadly available in both urban and semi-urban areas and thus exhibits as a promising candidate for ambient energy scavenging sources. In this research, a high-efficiency quad-band rectenna is designed for ambient RF wireless energy scavenging over the frequency range from 0.8 to 2.5 GHz. Firstly, the detailed characteristics (i.e., available frequency bands and associated power density levels) of the ambient RF power are studied and analyzed. The data (i.e., RF survey results) are then applied to aid the design of a new quad-band RF harvester. A newly designed impedance matching network (IMN) with an additional L-network in a third-branch of dual-port rectifier circuit is familiarized to increase the performance and RF-to-DC conversion efficiency of the harvester with comparatively very low input RF power density levels. A dual-polarized multi-frequency bow-tie antenna is designed, which has a wide bandwidth (BW) and is miniature in size. The dual cross planer structure internal triangular shape and co-axial feeding are used to decrease the size and enhance the antenna performance. Consequently, the suggested RF harvester is designed to cover all available frequency bands, including part of most mobile phone and wireless local area network (WLAN) bands in Malaysia, while the optimum resistance value for maximum dc rectification efficiency (up to 48%) is from 1 to 10 kΩ. The measurement result in the ambient environment (i.e., both indoor and outdoor) depicts that the new harvester is able to harvest dc voltage of 124.3 and 191.0 mV, respectively, which can be used for low power sensors and wireless applications.

The smart grid (SG) is a contemporary electrical network that enhances the network’s performance, reliability, stability, and energy efficiency. The integration of cloud and fog computing with SG can increase its efficiency. The combination of SG with cloud computing enhances resource allocation. To minimise the burden on the Cloud and optimise resource allocation, the concept of fog computing integration with cloud computing is presented. Fog has three essential functionalities: location awareness, low latency, and mobility. We offer a cloud and fog-based architecture for information management in this study. By allocating virtual machines using a load-balancing mechanism, fog computing makes the system more efficient (VMs). We proposed a novel approach based on binary particle swarm optimisation with inertia weight adjusted using simulated annealing. The technique is named BPSOSA. Inertia weight is an important factor in BPSOSA which adjusts the size of the search space for finding the optimal solution. The BPSOSA technique is compared against the round robin, odds algorithm, and ant colony optimisation. In terms of response time, BPSOSA outperforms round robin, odds algorithm, and ant colony optimisation by 53.99 ms, 82.08 ms, and 81.58 ms, respectively. In terms of processing time, BPSOSA outperforms round robin, odds algorithm, and ant colony optimisation by 52.94 ms, 81.20 ms, and 80.56 ms, respectively. Compared to BPSOSA, ant colony optimisation has slightly better cost efficiency, however, the difference is insignificant.

Wearable devices have revolutionized real-time health monitoring, yet challenges persist in enhancing their flexibility, weight, and accuracy. This paper presents the development of a wearable device employing a conductive polyacrylamide–lithium chloride–MXene (PLM) hydrogel sensor, an electronic circuit, and artificial intelligence (AI) for gait monitoring. The PLM sensor includes tribo-negative polydimethylsiloxane (PDMS) and tribo-positive polyurethane (PU) layers, exhibiting extraordinary stretchability (317% strain) and durability (1000 cycles) while consistently delivering stable electrical signals. The wearable device weighs just 23 g and is strategically affixed to a knee brace, harnessing mechanical energy generated during knee motion which is converted into electrical signals. These signals are digitized and then analyzed using a one-dimensional (1D) convolutional neural network (CNN), achieving an impressive accuracy of 100% for the classification of four distinct gait patterns: standing, walking, jogging, and running. The wearable device demonstrates the potential for lightweight and energy-efficient sensing combined with AI analysis for advanced biomechanical monitoring in sports and healthcare applications.

For low input radio frequency (RF) power from −35 to 5 dBm, a novel quad-band RF energy harvester (RFEH) with an improved impedance matching network (IMN) is proposed to overcome the poor conversion efficiency and limited RF power range of the ambient environment. In this research, an RF spectral survey was performed in the semi-urban region of Malaysia, and using these results, a multi-frequency highly sensitive RF energy harvester was designed to harvest energy from available frequency bands within the 0.8 GHz to 2.6 GHz frequency range. Firstly, a new IMN is implemented to improve the rectifying circuit’s efficiency in ambient conditions. Secondly, a self-complementary log-periodic higher bandwidth antenna is proposed. Finally, the design and manufacture of the proposed RF harvester’s prototype are carried out and tested to realize its output in the desired frequency bands. For an accumulative −15 dBm input RF power that is uniformly universal across the four radio frequency bands, the harvester’s calculated dc rectification efficiency is about 35 percent and reaches 52 percent at −20 dBm. Measurement in an ambient RF setting shows that the proposed harvester is able to harvest dc energy at −20 dBm up to 0.678 V.

Load forecasting plays a crucial role in the world of smart grids. It governs many aspects of the smart grid and smart meter, such as demand response, asset management, investment, and future direction. This paper proposes time-series forecasting for short-term load prediction to unveil the load forecast benefits through different statistical and mathematical models, such as artificial neural networks, auto-regression, and ARIMA. It targets the problem of excessive computational load when dealing with time-series data. It also presents a business case that is used to analyze different clusters to find underlying factors of load consumption and predict the behavior of customers based on different parameters. On evaluating the accuracy of the prediction models, it is observed that ARIMA models with the (P, D, Q) values as (1, 1, 1) were most accurate compared to other values.

Current camera traps use passive infrared triggers; therefore, they only capture images when animals have a substantially different surface body temperature than the background. Endothermic animals, such as mammals and birds, provide adequate temperature contrast to trigger cameras, while ectothermic animals, such as amphibians, reptiles, and invertebrates, do not. Therefore, a camera trap that is capable of monitoring ectotherms can expand the capacity of ecological research on ectothermic animals. This study presents the design, development, and evaluation of a solar-powered and artificial-intelligence-assisted camera trap system with the ability to monitor both endothermic and ectothermic animals. The system is developed using a central processing unit, integrated graphics processing unit, camera, infrared light, flash drive, printed circuit board, solar panel, battery, microphone, GPS receiver, temperature/humidity sensor, light sensor, and other customized circuitry. It continuously monitors image frames using a motion detection algorithm and commences recording when a moving animal is detected during the day or night. Field trials demonstrate that this system successfully recorded a high number of animals. Lab testing using artificially generated motion demonstrated that the system successfully recorded within video frames at a high accuracy of 0.99, providing an optimized peak power consumption of 5.208 W. No water or dust entered the cases during field trials. A total of 27 cameras saved 85,870 video segments during field trials, of which 423 video segments successfully recorded ectothermic animals (reptiles, amphibians, and arthropods). This newly developed camera trap will benefit wildlife biologists, as it successfully monitors both endothermic and ectothermic animals.

Pneumonia is a virulent disease that causes the death of millions of people around the world. Every year it kills more children than malaria, AIDS, and measles combined and it accounts for approximately one in five child-deaths worldwide. The invention of antibiotics and vaccines in the past century has notably increased the survival rate of Pneumonia patients. Currently, the primary challenge is to detect the disease at an early stage and determine its type to initiate the appropriate treatment. Usually, a trained physician or a radiologist undertakes the task of diagnosing Pneumonia by examining the patient’s chest X-ray. However, the number of such trained individuals is nominal when compared to the 450 million people who get affected by Pneumonia every year. Fortunately, this challenge can be met by introducing modern computers and improved Machine Learning techniques in Pneumonia diagnosis. Researchers have been trying to develop a method to automatically detect Pneumonia using machines by analyzing and the symptoms of the disease and chest radiographic images of the patients for the past two decades. However, with the development of cogent Deep Learning algorithms, the formation of such an automatic system is very much within the realms of possibility. In this paper, a novel diagnostic method has been proposed while using Image Processing and Deep Learning techniques that are based on chest X-ray images to detect Pneumonia. The method has been tested on a widely used chest radiography dataset, and the obtained results indicate that the model is very much potent to be employed in an automatic Pneumonia diagnosis scheme.

With the rapid increase of renewable energy generation worldwide, real‐time information has become essential to manage such assets, especially for systems installed offshore and in remote areas. To date, there is no cost‐effective condition monitoring technique that can assess the state of renewable energy sources in real‐time and provide suitable asset management decisions to optimize the utilization of such valuable assets and avoid any full or partial blackout due to unexpected faults. Based on the Internet of Things scheme, this paper represents a new application for the Supervisory Control and Data Acquisition (SCADA) system to monitor a hybrid system comprising photovoltaic, wind, and battery energy storage systems. Electrical parameters such as voltage, current, and power are monitored in real‐time via the ThingSpeak website. Network operators can control components of the hybrid power system remotely by the proposed SCADA system. The SCADA system is interfaced with the Matlab/Simulink software tool through KEPServerEX client. For cost‐effective design, low‐cost electronic components and Arduino Integrated Development Environment ATMega2560 remote terminal unit are employed to develop a hardware prototype for experimental analysis. Simulation and experimental results attest to the feasibility of the proposed system. Compared with other existing techniques, the developed system features advantages in terms of reliability and cost‐effectiveness. 1. Based on the Internet of Things scheme, this paper represents a new application for the Supervisory Control and Data Acquisition (SCADA) system to monitor a hybrid system comprising photovoltaic, wind, and battery energy storage systems. 2. Electrical parameters such as voltage, current, and power are monitored in real‐time via the ThingSpeak website. Network operators can control components of the hybrid power system remotely by the proposed SCADA system. 3. The SCADA system is interfaced with the Matlab/Simulink software tool through KEPServerEX client. 4. For cost‐effective design, low‐cost electronic components and Arduino integrated development environment ATMega2560 remote terminal unit are employed to develop a hardware prototype for experimental analysis.

Heart disease, one of the main reasons behind the high mortality rate around the world, requires a sophisticated and expensive diagnosis process. In the recent past, much literature has demonstrated machine learning approaches as an opportunity to efficiently diagnose heart disease patients. However, challenges associated with datasets such as missing data, inconsistent data, and mixed data (containing inconsistent missing data both as numerical and categorical) are often obstacles in medical diagnosis. This inconsistency led to a higher probability of misprediction and a misled result. Data preprocessing steps like feature reduction, data conversion, and data scaling are employed to form a standard dataset—such measures play a crucial role in reducing inaccuracy in final prediction. This paper aims to evaluate eleven machine learning (ML) algorithms—Logistic Regression (LR), Linear Discriminant Analysis (LDA), K-Nearest Neighbors (KNN), Classification and Regression Trees (CART), Naive Bayes (NB), Support Vector Machine (SVM), XGBoost (XGB), Random Forest Classifier (RF), Gradient Boost (GB), AdaBoost (AB), Extra Tree Classifier (ET)—and six different data scaling methods—Normalization (NR), Standscale (SS), MinMax (MM), MaxAbs (MA), Robust Scaler (RS), and Quantile Transformer (QT) on a dataset comprising of information of patients with heart disease. The result shows that CART, along with RS or QT, outperforms all other ML algorithms with 100% accuracy, 100% precision, 99% recall, and 100% F1 score. The study outcomes demonstrate that the model’s performance varies depending on the data scaling method.