Explore the vast range of titles available.

Potential applications of muon tomography, or muography, as non-invasive scanning method have increased in the last years together with the performance of the particle detectors used for muon detection, known as muon telescopes. A new concept muon telescope is presented, which could enlarge even more the range of application of this technique. It is based on a compact TPC equipped with a 2D pixelized Micromegas detector with multiplexed readout. This detector will overcome some of the constraints of the instruments currently used, as they limited acceptance, while keeping other features required for muography as stability, robustness or portability. Moreover, it will be capable to reconstruct the 3D direction of the incident muons with a single instrument. With its design and features, this kind of detectors can be fitted at boreholes from where they can scan the surroundings, being an interesting technique for mining exploration, geotechnics or monitoring of dykes or bridges which has arouse the interest of industry. In a further phase it is expected to develop a network of these detectors which will allow the 3D reconstruction of the studied object by the combination of the images registered by each of the telescopes. Main features and first tests and results of this new instrument will be presented together with some studies, performed by Monte Carlo simulations, of the capabilities of this muon telescope and the analysis principle.

The pseudorapidity distribution of charged hadrons produced in Au+Au collisions at a center-of-mass energy of $\\sqrt{{\\textrm{s}}_{\\textrm{NN}}}$ = 200 GeV is measured using data collected by the sPHENIX detector. Charged hadron yields are extracted by counting cluster pairs in the inner and outer layers of the Intermediate Silicon Tracker, with corrections applied for detector acceptance, reconstruction efficiency, combinatorial pairs, and contributions from secondary decays. The measured distributions cover |η| < 1.1 across various centralities, and the average pseudorapidity density of charged hadrons at mid-rapidity is compared to predictions from Monte Carlo heavy-ion event generators. This result, featuring full azimuthal coverage at mid-rapidity, is consistent with previous experimental measurements at the Relativistic Heavy Ion Collider, thereby supporting the broader sPHENIX physics program.

The pseudorapidity distribution of charged hadrons produced in Au+Au collisions at a center-of-mass energy of $$ \\sqrt{{\\textrm{s}}_{\\textrm{NN}}} $$ s NN = 200 GeV is measured using data collected by the sPHENIX detector. Charged hadron yields are extracted by counting cluster pairs in the inner and outer layers of the Intermediate Silicon Tracker, with corrections applied for detector acceptance, reconstruction efficiency, combinatorial pairs, and contributions from secondary decays. The measured distributions cover | η | < 1 . 1 across various centralities, and the average pseudorapidity density of charged hadrons at mid-rapidity is compared to predictions from Monte Carlo heavy-ion event generators. This result, featuring full azimuthal coverage at mid-rapidity, is consistent with previous experimental measurements at the Relativistic Heavy Ion Collider, thereby supporting the broader sPHENIX physics program.

Muon tomography, or muography, stands out as a non-invasive technique for the scanning of big objects' internal structure. It relies on the measurement of the direction changes or absorption of atmospheric muons when crossing the studied object. Proposed several decades ago, the performance achieved in particle detectors in the last years, specially in terms of stability, robustness and precision, has enlarged the possible applications of this technique. Bulk Micromegas represent a well-known technology suitable for the construction of muon telescopes based on these detectors. Thus autonomous and portable instruments have been conceived and constructed at Commissariat à l'Énergie Atomique et aux Énergies Alternatives (CEA), being able to perform muography measurements in-situ, next to the studied objects. At present, a new muon telescope concept is being developed at CEA, combining a Time Projection Chamber (TPC) readout by a 2D multiplexed bulk Micromegas. This new generation of detectors will enlarge the possible application fields of muography, being specially interesting for geotechnics.

A new radial time projection chamber based on Gas Electron Multiplier amplification layers was developed for the BONuS12 experiment in Hall B at Jefferson Lab. This device represents a significant evolutionary development over similar devices constructed for previous experiments, including cylindrical amplification layers constructed from single continuous GEM foils with less than 1\\% dead area. Particular attention had been paid to producing excellent geometric uniformity of all electrodes, including the very thin metalized polyester film of the cylindrical cathode. This manuscript describes the design, construction, and performance of this new detector.

The sPHENIX Time Projection Chamber Outer Tracker (TPOT) is a Micromegas based detector. It is a part of the sPHENIX experiment that aims to facilitate the calibration of the Time Projection Chamber, in particular the correction of the time-averaged and beam-induced distortions of the electron drift. This paper describes the detector mission, setup, construction, installation, commissioning and performance during the first year of sPHENIX data taking.

To fulfill needs in oncological research a new Micromegas detector has been developed to follow radiolabelled drugs in living organisms at the single cell level. This article describes the proof-of-concept of such a detector and compares its ability to detect and assess sub-becquerel \\tritium~activities with a commercial \\(\\beta\\)-imager

Due to their simplicity and versatility of design, straight strip or rectangular pad anode structures are frequently employed with micro-pattern gas detectors to reconstruct high precision space points for various tracking applications. The particle impact point is typically determined by interpolating the charge collected by several neighboring pads. However, to effectively extract the inherent positional information, the lateral spacing of the straight pads must be significantly smaller than the extent of the charge cloud. In contrast, highly interleaved anode patterns, such as zigzags, can adequately sample the charge with a pitch comparable to the size of the charge cloud or even larger. This has the considerable advantage of providing the same performance while requiring far fewer instrumented channels. Additionally, the geometric parameters defining such zigzag structures may be tuned to provide a uniform detector response without the need for so-called pad response functions, while simultaneously maintaining excellent position resolution. We have measured the position resolution of a variety of zigzag shaped anode patterns optimized for various MPGDs, including GEM, Micromegas, and micro-RWELL and compared this performance to the same detectors equipped with straight pads of varying pitch. We report on the performance results of each readout structure, evaluated under identical conditions in a test beam.

The steadily increasing luminosity of the LHC requires an upgrade with high-rate and high-resolution detector technology for the inner end cap of the ATLAS muon spectrometer: the New Small Wheels (NSW). In order to achieve the goal of precision tracking at a hit rate of about 15 kHz/cm\\(^2\\) at the inner radius of the NSW, large area Micromegas quadruplets with 100\\,\\microns spatial resolution per plane have been produced. % IRFU, from the CEA research center of Saclay, is responsible for the production and validation of LM1 Micromegas modules. The construction, production, qualification and validation of the largest Micromegas detectors ever built are reported here. Performance results under cosmic muon characterisation will also be discussed.

Khufu’s Pyramid is one of the largest archaeological monument all over the world, which still holds many mysteries. In 2016 and 2017, the ScanPyramids team reported on several discoveries of previously unknown voids by cosmic-ray muon radiography that is a non-destructive technique ideal for the investigation of large-scale structures. Among these discoveries, a corridor-shaped structure has been observed behind the so-called Chevron zone on the North face, with a length of at least 5 meters. A dedicated study of this structure was thus necessary to better understand its function in relation with the enigmatic architectural role of this Chevron. Here we report on new measurements of excellent sensitivity obtained with nuclear emulsion films from Nagoya University and gaseous detectors from CEA, revealing a structure of about 9 m length with a transverse section of about 2.0 m by 2.0 m. Khufu’s Pyramid is one of the largest archaeological monuments in the world, and still contains unexplored voids. Here, the authors use cosmic-ray muon radiography in multiple positions to precisely characterize one of these inner structures called the North Face Corridor.