Explore the vast range of titles available.

Background: Many advances have been made in hip labral repair and reconstruction and in the restoration of the suction seal. Purpose/Hypothesis: The purpose of this study was to evaluate the biomechanical effects of segmental labral reconstruction with a synthetic polyurethane scaffold (PS) in comparison with segmental labrectomy. Our hypothesis was that reconstruction with a icroporous polyurethane implant would normalize joint kinetics of the hip and restore the suction seal. Study Design: Controlled laboratory study. Methods: We used 10 hips from 5 fresh-frozen pelvises with an intact acetabular labrum without osteoarthritis. Using an intra-articular pressure measurement system, the contact area, contact pressure, and peak force were assessed for the following conditions: intact labrum, partial anterosuperior labrectomy, and PS reconstruction. For each condition, all specimens were analyzed in 4 positions (90° of flexion, 90° of flexion and internal rotation, 90° of flexion and external rotation, and 20° of extension) and underwent a labral seal test. The relative change from the intact condition was determined for all conditions and positions. Results: Compared with the intact labrum, labrectomy resulted in a significant decrease in the contact area (P < .001) and a significant increase in the peak force (P < .001) and contact pressure (P < .001) across all positions. Compared with labrectomy, PS reconstruction resulted in a significant increase in the contact area (P < .001) and a significant decrease in the contact pressure (P ≤ .02) and peak force (P < .001) across all positions. Compared with the intact labrum, PS reconstruction restored the contact area and peak force to normal values in all positions (P > .05), whereas the contact pressure was significantly decreased compared with labrectomy (P < .05) but did not return to normal values. The labral seal was lost in all specimens after labrectomy but was restored in 80% of the specimens after PS reconstruction. Conclusion: Femoroacetabular contact biomechanics significantly worsened after partial labrectomy; reconstruction using a PS restored the contact area and peak force to the intact state and improved the contact pressure increases seen after partial labrectomy. The contact area and peak force were normalized, and the labral seal was re-established in most cases. Clinical Relevance: This study provides biomechanical evidence for the use of a scaffold for labral reconstruction.

Background: Shortened femoral stems aim to mimic the biomechanical performance of traditional stems while preserving more bone and minimizing soft tissue damage. Our objective is to assess the outcomes of patients treated with a shortened stem (Furlong Evolution, JRI Orthopaedics, Sheffield, UK) to analyze the implant’s efficacy and survivorship. Methods: This retrospective observational study included all patients aged 18 to 70 undergoing uncemented shortened stem total hip replacement at Hospital del Mar between 2010 and 2018. Hip function and pain were assessed with the Merle d’Aubigné–Postel scale and visual analog scale, respectively. A radiographic analysis measured stem and cup orientation, leg length discrepancy, stem subsidence, and radiolucencies around the cup. Perioperative complications, prosthetic failures, and reoperations were documented. Results: A total of 109 patients (74 male, 35 female) of a mean age of 51.8 ± 8.8 years were included. The average follow-up was 91 ± 17.4 months. Radiographically, 71 (65.1%) of the stems had been inserted at the appropriate angulation (±3°), and 102 (93.6%) of the cups had been placed in the Lewinnek safety zone. Leg length discrepancy was observed in 19 (17.4%) cases. The mean Merle d’Aubigné–Postel score improved from 13.1 ± 1.39 preoperatively to 17.8 ± 0.49 at 6 months postoperatively (p < 0.001). Merle d’Aubigné–Postel subscales also reflected a statistically significant improvement (p < 0.001). The mean pain score 12 months postoperatively was 0.52 ± 1.22, with 95.4% of patients declaring themselves satisfied or highly satisfied. The expected 13-year survival according to a Kaplan–Meier analysis was 100% in the absence of infection and 91.3% if revision for any cause is taken as a survival endpoint. Conclusions: The shortened stem under analysis provides excellent functional results and long-term survival rates.

Background: The integrity of the acetabular labrum is critical in providing normal function and minimizing hip degeneration and is considered key for success in today’s hip preservation algorithm. Many advances have been made in labral repair and reconstruction to restore the suction seal. Purpose/Hypothesis: To compare the biomechanical effects of segmental labral reconstruction between the synthetic polyurethane scaffold (PS) and fascia lata autograft (FLA). Our hypothesis was that reconstruction with a macroporous polyurethane implant and autograft reconstruction of fascia lata would normalize hip joint kinetics and restore the suction seal. Study Design: Controlled laboratory study. Methods: Ten cadaveric hips from 5 fresh-frozen pelvises underwent biomechanical testing with a dynamic intra-articular pressure measurement system under 3 conditions: (1) intact labrum, (2) reconstruction with PS after a 3-cm segmental labrectomy, then (3) reconstruction with FLA. Contact area, contact pressure, and peak force were evaluated in 4 positions: 90º of flexion in neutral, 90º of flexion plus internal rotation, 90º of flexion plus external rotation, and 20º of extension. A labral seal test was performed for both reconstruction techniques. The relative change from the intact condition (value = 1) was determined for all conditions and positions. Results: PS restored contact area to at least 96% of intact (≥0.96; range, 0.96-0.98) in all 4 positions, and FLA restored contact area to at least 97% (≥0.97; range, 0.97-1.19). Contact pressure was restored to ≥1.08 (range, 1.08-1.11) with the PS and ≥1.08 (range, 1.08-1.10) with the FLA technique. Peak force returned to ≥1.02 (range, 1.02-1.05) with PS and ≥1.02 (range, 1.02-1.07) with FLA. No significant differences were found between the reconstruction techniques in contact area in any position (P > .06), with the exception that FLA presented greater contact area in flexion plus internal rotation as compared with PS (P = .003). Suction seal was confirmed in 80% of PSs and 70% of FLAs (P = .62). Conclusion: Segmental hip labral reconstruction using PS and FLA reapproximated femoroacetabular contact biomechanics close to the intact state. Clinical Relevance: These findings provide preclinical evidence supporting the use of a synthetic scaffold as an alternative to FLA and therefore avoiding donor site morbidity.

Background and Objectives: Previous studies demonstrated a huge variability among surgeons when it comes to reproducing the position of an acetabular cup in total hip arthroplasty. Our main objective is to determine if orthopedic surgeons can replicate a given orientation on a pelvic model better than untrained individuals. Our secondary objective is to determine if experience has any influence on their ability for this task. Materials and Methods: A group of specialist orthopedic hip surgeons and a group of volunteers with no medical training were asked to reproduce three given (randomly generated) acetabular cup orientations (inclination and anteversion) on a pelvic model. Error was measured by means of a hip navigation system and comparisons between groups were made using the appropriate statistical methods. Results: The study included 107 individuals, 36 orthopedic surgeons and 71 untrained volunteers. The mean error among surgeons was slightly greater as regards both inclination (7.84 ± 5.53 vs. 6.70 ± 4.03) and anteversion (5.85 ± 4.52 vs. 5.48 ± 3.44), although statistical significance was not reached (p = 0.226 and p = 0.639, respectively). Similarly, although surgeons with more than 100 procedures a year obtained better results than those with less surgical experience (8.01 vs. 7.67 degrees of error in inclination and 5.83 vs. 5.87 in anteversion), this difference was not statistically significant, either (p = 0.852 and p = 0.981). Conclusions: No differences were found in the average error made by orthopedic surgeons and untrained individuals. Furthermore, the surgeons’ cup orientation accuracy was not seen to improve significantly with experience.

Purpose Intraoperative acetabular fracture (IAF) is a non-common complication of primary total hip arthroplasty (THA). Despite the prevalence of intraoperative periprosthetic fractures are increasing, little has been written about this type of fracture. The main objective is to analyze possible risk factors, treatment options and functional outcomes associated with IAF. Methods Between 2006 and 2020, 4 senior arthroplasty surgeons performed 5540 uncemented primary THA. We reviewed our Total Joint Registry and found 18 cases with an IAF. We analyzed demographic factors, medical history, preoperative diagnose, acetabular cups designs, anatomic location of the fracture, treatment, associated complications and functional outcomes. The minimum duration of follow-up was 12 months. Results The prevalence of an IAF was 0,3%. All the acetabular cups were hemispherical modular. The most frequent acetabular cup associated with an IAF was the CSF Plus (JRI). In two cases the acetabular components were judged to be stable and no additional treatment was done. In the other sixteen patients, various surgical procedures were carried out. Almost 30% of patients that sustained an IAF had some complication during their follow up. Moreover, poor functionality outcomes were obtained (12.1 ± 4.1). in the final follow up accordance to Postel Merle d’Aubingé score. Conclusion Although IAF is a rare complication of THA, maintaining a high index of suspicion is important as they can be difficult to identify. Still with an adequate early treatment they have poor functionality and high risk of associated complications.

Background Periprosthetic femoral fractures following hip arthroplasty (FH-PPF) represent a severe complication, especially in elderly patients with compromised health. Traditionally, revision arthroplasty is recommended for B2–B3 FH-PPF, yet internal fixation has emerged as a debated alternative in select patients. The hypothesis was that fixation, in selected patients with B2–B3 FH-PPF, decreases mortality and surgical complication rates with the same functional outcomes as revision arthroplasty. Materials and methods PIPPAS is a multicenter prospective observational study. This cohort substudy includes 485 patients across 57 hospitals with B2–B3 FH-PPF between January 2021 and May 2023. Management strategy, revision or fixation, was at the attending surgeon’s discretion. Propensity score matching, controlled for age, age-adjusted Charlson Comorbidity Index (a-CCI), prefracture mobility, Pfeiffer scale, and ASA score, was done. Mortality risk factors were assessed using univariate and multivariate analysis. Results Out of 485 patients, 164 received fixation, and 321 underwent revision. Fixation patients were older (88 versus 82 years, p  < 0.001) and frailer. Fixation was associated with shorter hospital stay (13 versus 15 days, p  = 0.003) but higher 1-year mortality (25% versus 14.3%, p  = 0.04). There were no differences in medical or surgical complications ( p  = 0.83 and p  = 0.36) at any time, but dislocation rate was higher in the revision group ( p  = 0.001). The 1-year mortality rate in patients with no weight-bearing restrictions was higher for the revision group ( p  = 0.01). The propensity score matching showed higher 1-year mortality rate in the fixation group but no differences in functional outcomes, complications, or up to 6-months mortality. In the multivariate analysis a-CCI, cognitive impairment, B3 fractures, and prefracture independent walking impairment were independent mortality risk factors. Conclusions Revision arthroplasty showed less 1-year mortality rate and weight-bearing restrictions than fixation. However, frail patients with B2–B3 FH-PPF managed with fixation allowing full weight-bearing showed a lower 1-year mortality rate. Fixation in B2–B3 FH-PPF is a treatment option in frail patients, while aiming for stable constructions allowing full weight-bearing. Level of Evidence II: prospective cohort study. Trial registration: ClinicalTrials.gov (NCT04663893) Graphical Abstract

BackgroundThe incidence of all periprosthetic fractures (PPF), which require complex surgical treatment associated with high morbidity and mortality, is predicted to increase. The evolving surgical management has created a knowledge gap regarding its impact on immediate outcomes. This study aimed to describe current management strategies for PPF and their repercussions for in-hospital outcomes as well as to evaluate their implications for the community.MethodsPIPPAS (Peri-Implant PeriProsthetic Survival Analysis) was a prospective multicentre observational study of 1387 PPF performed during 2021. Descriptive statistics summarized the epidemiology, fracture characteristics, management, and immediate outcomes. A mixed-effects logistic regression model was employed to evaluate potential predictors of in-hospital mortality, complications, discharge status, and weight-bearing restrictions.ResultsThe study encompassed 32 (2.3%) shoulder, 4 (0.3%) elbow, 751 (54.1%) hip, 590 (42.5%) knee, and 10 (0.7%) ankle PPF. Patients were older (median 84 years, IQR 77–89), frail [median clinical frailty scale (CFS) 5, IQR 3–6], presented at least one comorbidity [median Charlson comorbidity index (CCI) 5, IQR 4–7], were community dwelling (81.8%), and had outdoor ambulation ability (65.6%). Femoral knee PPF were most frequently associated with uncemented femoral components, while femoral hip PPF occurred equally in cemented and uncemented stems. Patients were managed surgically (82%), with co-management (73.9%), through open approaches (85.9%) after almost 4 days (IQR, 51.9–153.6 h), with prosthesis revision performed in 33.8% of femoral hip PPF and 6.5% of femoral knee PPF. For half of the patients, the discharge instructions mandated weight-bearing restrictions. In-hospital mortality rates were 5.2% for all PPF and 6.2% for femoral hip PPF. Frailty, age > 84 years, mild cognitive impairment, CFS > 3, CCI > 3, and non-geriatric involvement were candidate predictors for in-hospital mortality, medical complications, and discharge to a nursing care facility. Management involving revision arthroplasty by experienced surgeons favoured full weight-bearing, while an open surgical approach favoured weight-bearing restrictions.ConclusionsCurrent arthroplasty fixation check and revision rates deviate from established guidelines, yet full weight-bearing is favoured. A surgical delay of over 100 h and a lack of geriatric co-management were related to in-hospital mortality and medical complications. This study recommends judicious hypoaggressive approaches. Addressing complications and individualizing the surgical strategy can lead to enhanced functional outcomes, alleviating the economic and social burdens upon hospital discharge.Level of Evidence Level IV case series.Trial registration: registered at ClinicalTrials.gov (NCT04663893), protocol ID: PI 20-2041.

Preliminary results concerning the first asymmetric synthesis of highly functionalized 1-benzamido-1,4-dihydropyridine derivatives via the reaction of hydrazones with alkylidenemalononitriles in the presence of β-isocupreidine catalyst are reported. The moderate, but promising, enantioselectivity observed (40–54% ee), opens the door to a new area of research for the asymmetric construction of new chiral 1,4-dihydropyridine derivatives, whose enantioselective catalytic preparation are still very limited. Moreover, the use of hydrazones for the enantioselective construction of chiral 1,4-dihydropyridines has been overlooked in the literature so far. Therefore, our research represents a pivotal example in this field which remains still unexplored.

Herein, we report our preliminary results concerning the first promising asymmetric synthesis of highly functionalized 2-oxospiro-[indole-3,4′-(1′,4′-dihydropyridine)] via the reaction of an enamine with isatylidene malononitrile derivatives in the presence of a chiral base organocatalyst. The moderate, but promising, enantioselectivity observed (30%–58% ee (enantiomeric excess)) opens the door to a new area of research for the asymmetric construction of these appealing spirooxindole skeletons, whose enantioselective syntheses are still very limited.

A simple approach to synthesize new highly substituted 4 H -pyran derivatives is described. Efficient Et 3 N acts as a readily accessible catalyst of this process performed in pure water and with only a 20 mol% of catalyst loading. The extremely simple operational methodology, short reaction times, clean procedure and excellent product yields render this new approach extremely appealing for the synthesis of 4 H -pyrans, as potentially biological scaffolds. Additionally, DNA interaction analysis reveals that 4 H -pyran derivatives behave preferably as minor groove binders over major groove or intercalators. Therefore, this is one of the scarce examples where pyrans have resulted to be interesting DNA binders with high binding constants ( K b ranges from 1.53 × 10 4  M −1 to 2.05 × 10 6  M −1 ).