Explore the vast range of titles available.

Bone tissue regeneration is a rapidly evolving field aimed at the development of biocompatible materials and devices, such as scaffolds, to treat diseased and damaged osseous tissue. Functional scaffolds maintain structural integrity and provide mechanical support at the defect site during the healing process, while simultaneously enabling or improving regeneration through amplified cellular cues between the scaffold and native tissues. Ample research on functionalization has been conducted to improve scaffold–host tissue interaction, including fabrication techniques, biomaterial selection, scaffold surface modifications, integration of bioactive molecular additives, and post-processing modifications. Each of these methods plays a crucial role in enabling scaffolds to not only support but actively participate in the healing and regeneration process in bone and joint surgery. This review provides a state-of-the-art, comprehensive overview of the functionalization of scaffold-based strategies used in tissue engineering, specifically for bone regeneration. Critical issues and obstacles are highlighted, applications and advances are described, and future directions are identified.

Since three-dimensional (3D) bioprinting has emerged, it has continuously to evolved as a revolutionary technology in surgery, offering new paradigms for reconstructive and regenerative medical applications. This review highlights the integration of 3D printing, specifically bioprinting, across several surgical disciplines over the last five years. The methods employed encompass a review of recent literature focusing on innovations and applications of 3D-bioprinted tissues and/or organs. The findings reveal significant advances in the creation of complex, customized, multi-tissue constructs that mimic natural tissue characteristics, which are crucial for surgical interventions and patient-specific treatments. Despite the technological advances, the paper introduces and discusses several challenges that remain, such as the vascularization of bioprinted tissues, integration with the host tissue, and the long-term viability of bioprinted organs. The review concludes that while 3D bioprinting holds substantial promise for transforming surgical practices and enhancing patient outcomes, ongoing research, development, and a clear regulatory framework are essential to fully realize potential future clinical applications.

Large osseous defects resulting from trauma, tumor resection, or fracture render the inherent ability of the body to repair inadequate and necessitate the use of bone grafts to facilitate the recovery of both form and function of the bony defect sites. In the United States alone, a large number of bone graft procedures are performed yearly, making it an essential area of investigation and research. Synthetic grafts represent a potential alterative to autografts due to their patient-specific customizability, but currently lack widespread acceptance in the clinical space. Early in their development, non-autologous bone grafts composed of metals such as stainless steel and titanium alloys were favorable due to their biocompatibility, resistance to corrosion, mechanical strength, and durability. However, since their inception, bioceramics have also evolved as viable alternatives. This review aims to present an overview of the fundamental prerequisites for tissue engineering devices using bioceramics as well as to provide a comprehensive account of their historical usage and significant advancements over time. This review includes a summary of commonly used manufacturing techniques and an evaluation of their use as drug carriers and bioactive coatings—for therapeutic ion/drug release, and potential avenues to further enhance hard tissue regeneration.

Tricalcium phosphate (TCP) bioceramics, available as α- and β-polymorphs, are frequently employed in the production of three-dimensionally (3D) printed bone scaffolds. Although hydrothermal immersion processing (HP) and sintering (S) are commonly adopted as post-printing techniques for bioceramics, a comprehensive comparative analysis of their effects on the osteogenic performance of α- and β-polymorphs in vivo remains inadequately investigated. In this study, α-TCP and β-TCP scaffolds were fabricated via direct ink writing and subjected to hydrothermal immersion processing (α-TCP/HP) and sintering (β-TCP/S) prior to implantation in n = 12 skeletally mature sheep (n = 1 scaffold per group per animal), and the outcome variables were evaluated at 3 and 12 weeks postoperatively (n = 6 sheep per time point). The quantitative results showed no significant differences in bone deposition or scaffold resorption at 3 weeks postoperatively (p = 0.618 and p = 0.898, respectively). However, at 12 weeks, there was a significant increase in osteogenesis and scaffold resorption in the β-TCP/S cohort relative to the α-TCP/HP counterparts (p < 0.001 and p = 0.004, respectively). β-TCP scaffolds subjected to post-print sintering exhibited superior osteoconductive and resorptive profiles compared to hydrothermal immersion-processed α-TCP scaffolds over the 12-week healing period.

Alveolar ridge preservation by guided bone regeneration (GBR) is a surgical procedure that can be performed prior to implant placement to increase the likelihood of survival. Autogenic, allogenic, or xenogeneic derived bone (particulate graft) are frequently placed in conjunction with a barrier membrane for GBR; however, advancements in tissue engineering have led to the development of promising synthetic alternatives. Fiber-based scaffolds exhibit high surface-to-volume ratio and thereby improve cellular adhesion, reduce the likelihood of dehiscence and poor bone regeneration often associated with poorly immobilized particulate graft. This study aimed to evaluate the performance of a novel electrospun composite scaffold coated in a recombinant variant of human bone morphogenetic protein-2 (OsteoAdapt) relative to a porcine-derived xenograft. Further, it sought to determine if OsteoAdapt would remain within the defect without a membrane in place, as this is not feasible with the particulate xenograft currently used in clinical practice. Four-walled mandibular defects were created in each adult beagle dog (n = 4 defects per dog; n = 4 dogs for a total of 16 defects). Each defect received one of three experimental (test) groups: (i) OsteoAdapt without membrane (OA), (ii) OsteoAdapt with porcine membrane (OA/ZM), (iii) OsteoAdapt mixed with porcine particulate xenograft (Zcore™) with porcine membrane (OA/P/ZM) and compared to a positive control - Zcore™ with porcine membrane (CTRL). After 4-weeks , bone regeneration was assessed through qualitative volumetric reconstruction, qualitative and quantitative histological analyses. Histomorphometric measurement of bone regeneration (% bone) within the region of interest revealed no significant differences between OA, OA/ZM, or OA/P/ZM in comparison to the CTRL at 4-weeks ( = 0.086, = 0.218, and = 0.806, respectively). Similarly, evaluation of soft tissue presence (% soft tissue) indicated no significant differences between experimental groups OA, OA/ZM, or OA/P/ZM relative to the CTRL ( = 0.341, = 0.679, = 0.982, respectively). However, qualitative analysis of the histological micrographs demonstrated advanced bone healing characterized by an abundance of nucleation sites for regeneration to occur in defects treated with OA relative to the CTRL. Bone overgrowth beyond the limits of defect borders was observed in groups treated OA/ZM and OA/P/ZM. In contrast to the treatment groups, minimal woven bone was visualized in the CTRL group. Compared to defects treated with porcine-derived particulate and barrier membrane (CTRL), defects filled with OA exhibited bone regeneration throughout the defect, with bone overgrowth when covered by a barrier membrane at 4-weeks . This suggests that the novel combination of AMP-2 and a bioceramic/synthetic polymer-based electrospun scaffold is a suitable candidate for GBR procedures, without a barrier membrane to secure its place within a defect.

The energy state of endosteal implants is dependent on the material, manufacturing technique, cleaning procedure, sterilization method, and surgical manipulation. An implant surface carrying a positive charge renders hydrophilic properties, thereby facilitating the absorption of vital plasma proteins crucial for osteogenic interactions. Techniques to control the surface charge involve processes like oxidation, chemical and topographical adjustments as well as the application of nonthermal plasma (NTP) treatment. NTP at atmospheric pressure and at room temperature can induce chemical and/or physical reactions that enhance wettability through surface energy changes. NTP has thus been used to modify the oxide layer of endosteal implants that interface with adjacent tissue cells and proteins. Results have indicated that if applied prior to implantation, NTP strengthens the interaction with surrounding hard tissue structures during the critical phases of early healing, thereby promoting rapid bone formation. Also, during this time period, NTP has been found to result in enhanced biomechanical fixation. As such, the application of NTP may serve as a practical and reliable method to improve healing outcomes. This review aims to provide an in-depth exploration of the parameters to be considered in the application of NTP on endosteal implants. In addition, the short- and long-term effects of NTP on osseointegration are addressed, as well as recent advances in the utilization of NTP in the treatment of periodontal disease.

Biomimetics is the science of imitating nature’s designs and processes to create innovative solutions for various fields, including dentistry and craniofacial reconstruction. In these areas, biomimetics involves drawing inspiration from living organisms/systems to develop new materials, techniques, and devices that closely resemble natural tissue structures and enhance functionality. This field has successfully demonstrated its potential to revolutionize craniofacial procedures, significantly improving patient outcomes. In dentistry, biomimetics offers exciting possibilities for the advancement of new dental materials, restorative techniques, and regenerative potential. By analyzing the structure/composition of natural teeth and the surrounding tissues, researchers have developed restorative materials that mimic the properties of teeth, as well as regenerative techniques that might assist in repairing enamel, dentin, pulp, cementum, periodontal ligament, and bone. In craniofacial reconstruction, biomimetics plays a vital role in developing innovative solutions for facial trauma, congenital defects, and various conditions affecting the maxillofacial region. By studying the intricate composition and mechanical properties of the skull and facial bones, clinicians and engineers have been able to replicate natural structures leveraging computer-aided design and manufacturing (CAD/CAM) and 3D printing. This has allowed for the creation of patient-specific scaffolds, implants, and prostheses that accurately fit a patient’s anatomy. This review highlights the current evidence on the application of biomimetics in the fields of dentistry and craniofacial reconstruction.

Osseodensification enhances the stability of endosteal implants. However, pre-clinical studies utilizing osseodensification instrumentation do not account for the limited presence of trabeculae seen clinically. This study aimed to evaluate the effect of osseodensification instrumentation on osteotomy healing in scenarios with and without the presence of trabecular bone. A ~10 cm incision was made over the hip of twelve sheep. Trabecular bone was surgically removed from twelve sites (one site/animal; negative control (Neg. Ctrl)) and left intact at twelve sites (one site/animal; experimental group (Exp.)). All osteotomies were created using the osseodensification drilling protocol. Each osteotomy received an endosteal implant and was evaluated after 3 or 12 weeks of healing (n = 6 animals/time). Histology revealed increased woven and lamellar bone surrounding the implants in the Exp. group relative to the Neg. Ctrl group. The Exp. group demonstrated the presence of bone fragments, which acted as nucleating sites, thereby enhancing the bone formation and remodeling processes. Bone-to-implant contact (%BIC) and bone area fractional occupancy (%BAFO) were significantly higher in the Exp. group relative to the Neg. Ctrl group both at 3 weeks (p = 0.009 and p = 0.043) and 12 weeks (p = 0.010 and p = 0.008). Osseodensification instrumentation in the presence of trabecular bone significantly improved osseointegration. However, no negative influences such as necrosis, inflammation, microfractures, or dehiscence were observed in the absence/limited presence of trabeculae.

Bone regeneration remains a significant clinical challenge, often necessitating surgical approaches when healing bone defects and fracture nonunions. Within this context, the modulation of adenosine signaling pathways has emerged as a promising therapeutic option, encouraging osteoblast activation and tempering osteoclast differentiation. A literature review of the PubMed database with relevant keywords was conducted. The search criteria involved in vitro or in vivo models, with clear methodological descriptions. Only studies that included the use of indirect adenosine agonists, looking at the effects of bone regeneration, were considered relevant according to the eligibility criteria. A total of 29 articles were identified which met the inclusion and exclusion criteria, and they were reviewed to highlight the preclinical translation of adenosine agonists. While preclinical studies demonstrate the therapeutic potential of adenosine signaling in bone regeneration, its clinical application remains unrealized, underscoring the need for further clinical trials. To date, only large, preclinical animal models using indirect adenosine agonists have been successful in stimulating bone regeneration. The adenosine receptors (A1, A2A, A2B, and A3) stimulate various pathways, inducing different cellular responses. Specifically, indirect adenosine agonists act to increase the extracellular concentration of adenosine, subsequently agonizing the respective adenosine receptors. The agonism of each receptor is dependent on its expression on the cell surface, the extracellular concentration of adenosine, and its affinity for adenosine. This comprehensive review analyzed the multitude of indirect agonists currently being studied preclinically for bone regeneration, discussing the mechanisms of each agonist, their cellular responses in vitro, and their effects on bone formation in vivo.

Response criteria for paediatric intracranial ependymoma vary historically and across different international cooperative groups. The Response Assessment in the Pediatric Neuro-Oncology (RAPNO) working group, consisting of an international panel of paediatric and adult neuro-oncologists, neuro-radiologists, radiation oncologists, and neurosurgeons, was established to address both the issues and the unique challenges in assessing the response in children with CNS tumours. We established a subcommittee to develop response assessment criteria for paediatric ependymoma. Current practice and literature were reviewed to identify major challenges in assessing the response of paediatric ependymoma to clinical trial therapy. For areas in which data were scarce or unavailable, consensus was reached through an iterative process. RAPNO response assessment recommendations include assessing disease response on the basis of changes in tumour volume, and using event-free survival as a study endpoint for patients entering clinical trials without bulky disease. Our recommendations for response assessment include the use of brain and spine MRI, cerebral spinal fluid cytology, neurological examination, and steroid use. Baseline postoperative imaging to assess for residual tumour should be obtained 24–48 h after surgery. Our consensus recommendations and response definitions should be prospectively validated in clinical trials.