Explore the vast range of titles available.

Abstract BACKGROUND Minimally invasive transforaminal lumbar interbody fusion (MIS-TLIF) is an increasingly popular procedure with several potential advantages over traditional open TLIF. OBJECTIVE The current study aimed to compare fusion rates of different graft materials used in MIS-TLIF, via meta-analysis of the published literature. METHODS A Medline search was performed and a database was created including patient's type of graft, clinical outcome, fusion rate, fusion assessment modality, and duration of follow-up. Meta-analysis of the fusion rate was performed using StatsDirect software (StatsDirect Ltd, Cheshire, United Kingdom). RESULTS A total of 1533 patients from 40 series were included. Fusion rates were high, ranging from 91.8% to 99%. The imaging modalities used to assess fusion were computed tomography scans (30%) and X-rays (70%). Comparison of all recombinant human bone morphogenetic protein (rhBMP) series with all non-rhBMP series showed fusion rates of 96.6% and 92.5%, respectively. The lowest fusion rate was seen with isolated use of autologous local bone (91.8%). The highest fusion rate was observed with combination of autologous local bone with bone extender and rhBMP (99.1%). The highest fusion rate without the use of BMP was seen with autologous local bone + bone extender (93.1%). The reported complication rate ranged from 0% to 35.71%. Clinical improvement was observed in all studies. CONCLUSION Fusion rates are generally high with MIS-TLIF regardless of the graft material used. Given the potential complications of iliac bone harvesting and rhBMP, use of other bone graft options for MIS-TLIF is reasonable. The highest fusion rate without the use of rhBMP was seen with autologous local bone plus bone extender (93.1%).

In the physiochemical sciences, plasma is used to describe an ionized gas. Previous studies have implicated plasma surface treatment in the enhancement of hydrophilicity of implanted musculoskeletal reconstructive materials. Hydroxyapatite (HA) ceramics, widely used in bone tissue regeneration, have made great advancements to skeletal surgery. In the present study, we investigate the impact of low-pressure plasma on the interconnected porous calcium hydroxyapatite (IP-CHA) both in vitro and in vivo. Our results indicate that dielectric barrier discharge (DBD) plasma, when used with oxygen, can augment the hydrophilicity of non-porous HA surfaces and the osteoconductivity of the IP-CHA disc via increased water penetration of inner porous structures, as demonstrated through microfocus computed tomography (μCT) assay. In vivo implantation of plasma-treated IP-CHA displayed superior bone ingrowth than untreated IP-CHA. Though plasma-treated IP-CHA did not alter osteoblast cell proliferation, it accelerated osteogenic differentiation of seeded marrow mesenchymal stem cells. In vitro X-ray photoelectron spectroscopy (XPS) revealed that this plasma treatment increases levels of oxygen, rather than nitrogen, on the plasma-treated IP-CHA surface. These findings suggest that plasma treatment, an easy and simple processing, can significantly improve the osteoconductive potential of commonly used artificial bones such as IP-CHA. Further optimization of plasma treatment and longer-term follow-up of in vivo application are required toward its clinical application.

The most common reason that adults in the United States see their physician is lower back or neck pain secondary to degenerative disc disease. To date, approaches to treat degenerative disc disease are confined to purely mechanical devices designed to either eliminate or enable flexibility of the diseased motion segment. Tissue engineered intervertebral discs (TE-IVDs) have been proposed as an alternative approach and have shown promise in replacing native IVD in the rodent tail spine. Here we demonstrate the efficacy of our TE-IVDs in the canine cervical spine. TE-IVD components were constructed using adult canine annulus fibrosis and nucleus pulposus cells seeded into collagen and alginate hydrogels, respectively. Seeded gels were formed into a single disc unit using molds designed from the geometry of the canine spine. Skeletally mature beagles underwent discectomy with whole IVD resection at levels between C3/4 and C6/7, and were then divided into two groups that received only discectomy or discectomy followed by implantation of TE-IVD. Stably implanted TE-IVDs demonstrated significant retention of disc height and physiological hydration compared to discectomy control. Both 4-week and 16-week histological assessments demonstrated chondrocytic cells surrounded by proteoglycan-rich matrices in the NP and by fibrocartilaginous matrices in the AF portions of implanted TE-IVDs. Integration into host tissue was confirmed over 16 weeks without any signs of immune reaction. Despite the significant biomechanical demands of the beagle cervical spine, our stably implanted TE-IVDs maintained their position, structure and hydration as well as disc height over 16 weeks in vivo.

Introduction. A new generation of iCT scanner, Airo®, has been introduced. The purpose of this study is to describe how Airo facilitates minimally invasive transforaminal lumbar interbody fusion (MIS-TLIF). Method. We used the latest generation of portable iCT in all cases without the assistance of K-wires. We recorded the operation time, number of scans, and pedicle screw accuracy. Results. From January 2015 to December 2015, 33 consecutive patients consisting of 17 men and 16 women underwent single-level or two-level MIS-TLIF operations in our institution. The ages ranged from 23 years to 86 years (mean, 66.6 years). We treated all the cases in MIS fashion. In four cases, a tubular laminectomy at L1/2 was performed at the same time. The average operation time was 192.8 minutes and average time of placement per screw was 2.6 minutes. No additional fluoroscopy was used. Our screw accuracy rate was 98.6%. No complications were encountered. Conclusions. Airo iCT MIS-TLIF can be used for initial planning of the skin incision, precise screw, and cage placement, without the need for fluoroscopy. “Total navigation” (complete intraoperative 3D navigation without fluoroscopy) can be achieved by combining Airo navigation with navigated guide tubes for screw placement.

Mesenchymal stem cells (MSCs) derived from induced pluripotent stem cells (iPSCs) are a promising cell source for the repair of skeletal disorders. Recently, neural crest cells (NCCs) were reported to be effective for inducing mesenchymal progenitors, which have potential to differentiate into osteochondral lineages. Our aim was to investigate the feasibility of MSC-like cells originated from iPSCs via NCCs for osteochondral repair. Initially, MSC-like cells derived from iPSC-NCCs (iNCCs) were generated and characterized in vitro. These iNCC-derived MSC-like cells (iNCMSCs) exhibited a homogenous population and potential for osteochondral differentiation. No upregulation of pluripotent markers was detected during culture. Second, we implanted iNCMSC-derived tissue-engineered constructs into rat osteochondral defects without any preinduction for specific differentiation lineages. The implanted cells remained alive at the implanted site, whereas they failed to repair the defects, with only scarce development of osteochondral tissue in vivo. With regard to tumorigenesis, the implanted cells gradually disappeared and no malignant cells were detected throughout the 2-month follow-up. While this study did not show that iNCMSCs have efficacy for repair of osteochondral defects when implanted under undifferentiated conditions, iNCMSCs exhibited good chondrogenic potential in vitro under appropriate conditions. With further optimization, iNCMSCs may be a new source for tissue engineering of cartilage.

For an ideal osteochondral repair, it is important to facilitate zonal restoration of the subchondral bone and the cartilage, layer by layer. Specifically, restoration of the osteochondral junction and secure integration with adjacent cartilage could be considered key factors. The purpose of the present study was to investigate the feasibility of a combined material comprising a scaffold-free tissue-engineered construct (TEC) derived from synovial mesenchymal stem cells (MSCs) and a hydroxyapatite (HA) artificial bone using a rabbit osteochondral defect model. Osteochondral defects were created on the femoral groove of skeletally mature rabbits. The TEC and HA artificial bone were hybridized to develop a combined implant just before use, which was then implanted into defects (N=23). In the control group, HA alone was implanted (N=18). Histological evaluation and micro-indentation testing was performed for the evaluation of repair tissue. Normal knees were used as an additional control group for biomechanical testing (N=5). At hybridization, the TEC rapidly attached onto the surface of HA artificial bone block, which was implantable to osteochondral defects. Osteochondral defects treated with the combined implants exhibited more rapid subchondral bone repair coupled with the development of cartilaginous tissue with good tissue integration to the adjacent host cartilage when assessed at 6 months post implantation. Conversely, the control group exhibited delayed subchondral bone repair. In addition, the repair cartilaginous tissue in this group had poor integration to adjacent cartilage and contained clustered chondrocytes, suggesting an early osteoarthritis (OA)-like degenerative change at 6 months post implantation. Biomechanically, the osteochondral repair tissue treated with the combined implants at 6 months restored tissue stiffness, similar to normal osteochondral tissue. The combined implants significantly accelerated and improved osteochondral repair. Specifically, earlier restoration of subchondral bone, as well as good tissue integration of repair cartilage to adjacent host tissue could be clinically relevant in terms of the acceleration of postoperative rehabilitation and longer-term durability of repaired articular surface in patients with osteochondral lesions, including those with OA. In addition, the combined implant could be considered a promising MSC-based bio-implant with regard to safety and cost-effectiveness, considering that the TEC is a scaffold-free implant and HA artificial bone has been widely used in clinical practice.

The purpose of the present study was to investigate the zone-specific integration properties of articular cartilage defects treated in vivo with scaffold-free three-dimensional tissue-engineered constructs (TECs) derived from allogenic synovial mesenchymal stem cells (MSCs) in a porcine model. The TEC derived from the synovial MSCs was implanted into chondral defects in the medial femoral condyle of the knee. The integration boundary of repair tissue with the adjacent host cartilage was morphologically and biomechanically evaluated at 6 months post-implantation. Histological assessments showed that the repair tissue in each zone was well integrated with the adjacent host cartilage, with an apparent secure continuity of the extracellular matrix. There were no significant differences in histological scores between the integration boundary and the center of the repair tissue at every zone. Nonetheless, in all the specimens subjected to mechanical testing, failure occurred at the integration boundary. The average tensile strength of the integration boundary vs normal cartilage was 0.6 vs 4.9, 3.0 vs 12.6, and 5.5 vs 12.8MPa at the superficial, middle, and deep layers, respectively. Thus, these results indicate the most fragile point in the repair tissue remained at the integration boundary in spite of the apparent secure tissue continuity and equivalent histological quality with the center of the repair tissue. Such tissue vulnerability at the surface integration boundary could affect the long-term durability of the tissue repair, and thus, special consideration will be needed in the post-operative rehabilitation programming to enhance the longevity of such repair tissues in response to normal knee loading.

Locomotive Syndrome (LS) is defined by decreased walking and standing abilities due to musculoskeletal issues. Early diagnosis is vital as LS can be reversed with appropriate intervention. Although diagnosing LS using standardized charts is straightforward, the labor-intensive and time-consuming nature of the process limits its widespread implementation. To address this, we introduced a Deep Learning (DL)-based computer vision model that employs OpenPose for pose estimation and MS-G3D for spatial-temporal graph analysis. This model objectively assesses gait patterns through single-camera video captures, offering a novel and efficient method for LS prediction and analysis. Our model was trained and validated using a dataset of 186 walking videos, plus 65 additional videos for external validation. The model achieved an average sensitivity of 0.86, demonstrating high effectiveness in identifying individuals with LS. The model’s positive predictive value was 0.85, affirming its reliable LS detection, and it reached an overall accuracy rate of 0.77. External validation using an independent dataset confirmed strong generalizability with an Area Under the Curve of 0.75. Although the model accurately diagnosed LS cases, it was less precise in identifying non-LS cases. This study pioneers in diagnosing LS using computer vision technology for pose estimation. Our accessible, non-invasive model serves as a tool that can accurately diagnose the labor-intensive LS tests using only visual assessments, streamlining LS detection and expediting treatment initiation. This significantly improves patient outcomes and marks a crucial advancement in digital health, addressing key challenges in management and care of LS.

Background Discectomies are a common surgical treatment for disc herniations in the canine spine. However, the effect of these procedures on intervertebral disc tissue is not fully understood. The objective of this study was to assess degenerative changes of cervical spinal segments undergoing discectomy procedures, in vivo. Results Discectomies led to a 60% drop in disc height and 24% drop in foraminal height. Segments did not fuse but showed osteophyte formation as well as endplate sclerosis. MR imaging revealed terminal degenerative changes with collapse of the disc space and loss of T2 signal intensity. The endplates showed degenerative type II Modic changes. Quantitative MR imaging revealed that over 95% of Nucleus Pulposus tissue was extracted and that the nuclear as well as overall disc hydration significantly decreased. Histology confirmed terminal degenerative changes with loss of NP tissue, loss of Annulus Fibrosus organization and loss of cartilage endplate tissue. The bony endplate displayed sclerotic changes. Conclusion Discectomies lead to terminal degenerative changes. Therefore, these procedures should be indicated with caution specifically when performed for prophylactic purposes.

The management of osteoarthritis (OA) remains challenging and controversial. Although several clinical options exist for the treatment of OA, regeneration of the damaged articular cartilage has proved difficult due to the limited healing capacity. With the advancements in tissue engineering and cell-based technologies over the past decade, new therapeutic options for patients with osteochondral lesions potentially exist. This review will focus on the feasibility of tissue-engineered biphasic scaffolds, which can mimic the native osteochondral complex, for osteochondral repair and highlight the recent development of these techniques toward tissue regeneration. Moreover, basic anatomy, strategy for osteochondral repair, the design and fabrication methods of scaffolds, as well as the choice of cells, growth factor, and materials will be discussed. Specifically, we focus on the latest preclinical animal studies using large animals and clinical trials with high clinical relevance. In turn, this will facilitate an understanding of the latest trends in osteochondral repair and contribute to the future application of such clinical therapies in patients with OA.