Explore the vast range of titles available.

Every year, 700 million twenty-foot (container) equivalent units pass through the container terminals of the harbours all over the world. Only a small percentage (34%) are scanned to inspect the presence of radioactive materials. The need for controls is hampered essentially by three factors: the amount of both time and personnel necessary to control each container and the use of scanning methods based on systems potentially harmful for the personnel itself. Muon tomography can become a strategy for fast and reliable inspection of containers without using ionizing radiation. This technology takes advantage of multiple Coulomb scattering of the muons (particle produced by cosmic rays) through media to understand the composition and the geometry of the scanned volume. The TECNOMUSE project has the purpose to realize a muon tomography scanner based on a novel geometry and, for the first time, using Resistive Plate Chambers detectors. In this work, the preliminary results from the TECNOMUSE scanner are evaluated via Monte Carlo simulations. Many different simulations have been made with the aim to assess the detection capabilities of the device, its spatial resolution and the time required to reconstruct and distinguish different materials.

A measurement of the double-differential cross-section for the production of charged pions in proton–tantalum collisions emitted at large angles from the incoming beam direction is presented. The data were taken in 2002 with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 GeV/c to 12 GeV/c hitting a tantalum target with a thickness of 5% of a nuclear interaction length. The angular and momentum range covered by the experiment (100 MeV/c ≤p< 800 MeV/c and 0.35 rad ≤θ< 2.15 rad) is of particular importance for the design of a neutrino factory. The produced particles were detected using a small-radius cylindrical time projection chamber (TPC) placed in a solenoidal magnet. Track recognition, momentum determination and particle identification were all performed based on the measurements made with the TPC. An elaborate system of detectors in the beam line ensured the identification of the incident particles. Results are shown for the double-differential cross-sections d2σ/dpdθ at four incident proton beam momenta (3 GeV/c, 5 GeV/c, 8 GeV/c and 12 GeV/c). In addition, the pion yields within the acceptance of typical neutrino factory designs are shown as a function of beam momentum. The measurement of these yields within a single experiment eliminates most systematic errors in the comparison between rates at different beam momenta and between positive and negative pion production.

Nuclear fragmentation processes are relevant in different fields of basic research and applied physics and are of particular interest for tumor therapy and for space radiation protection applications. The FIRST (Fragmentation of Ions Relevant for Space and Therapy) experiment at SIS accelerator of GSI laboratory in Darmstadt, has been designed for the measurement of different ions fragmentation cross sections at different energies between 100 and 1000 MeV/nucleon. The experiment is performed by an international collaboration made of institutions from Germany, France, Italy and Spain. The experimental apparatus is partly based on an already existing setup made of the ALADIN magnet, the MUSIC IV TPC, the LAND2 neutron detector and the TOFWALL scintillator TOF system, integrated with newly designed detectors in the interaction Region (IR) around the carbon removable target: a scintillator Start Counter, a Beam Monitor drift chamber, a silicon Vertex Detector and a Proton Tagger for detection of light fragments emitted at large angles (KENTROS). The scientific program of the FIRST experiment started on summer 2011 with the study of the 400 MeV/nucleon 12C beam fragmentation on thin (8mm) carbon target.

A measurement of the double-differential π ± production cross-section in proton–carbon, proton–copper and proton–tin collisions in the range of pion momentum 100 MeV/ c ≤p<800 MeV/ c and angle 0.35 rad≤θ<2.15 rad is presented. The data were taken with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 GeV/ c to 12 GeV/ c hitting a target with a thickness of 5% of a nuclear interaction length. The tracking and identification of the produced particles was done using a small-radius cylindrical time projection chamber (TPC) placed in a solenoidal magnet. An elaborate system of detectors in the beam line ensured the identification of the incident particles. Results are shown for the double-differential cross-sections d 2 σ/dpdθ at four incident proton beam momenta (3 GeV/ c , 5 GeV/ c , 8 GeV/ c and 12 GeV/ c ).

Measurements of the double-differential π ± production cross-section in the range of momentum 100 MeV/c≤p< 800 MeV/c and angle 0.35 rad ≤θ<  2.15 rad in proton–beryllium, proton–aluminium and proton–lead collisions are presented. The data were taken with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 GeV/c to 12.9 GeV/c hitting a target with a thickness of 5% of a nuclear interaction length. The tracking and identification of the produced particles was performed using a small-radius cylindrical time projection chamber (TPC) placed inside a solenoidal magnet. Incident particles were identified by an elaborate system of beam detectors. Results are obtained for the double-differential cross-sections d 2 σ/dpdθ at six incident proton beam momenta (3 GeV/c, 5 GeV/c, 8 GeV/c, 8.9 GeV/c (Be only), 12 GeV/c and 12.9 GeV/c (Al only)) and compared to previously available data.

Measurements of the double-differential π± production cross-section in the range of momentum 100 MeV/c≤p< 800 MeV/c and angle 0.35 rad ≤θ< 2.15 rad in proton-beryllium, proton-aluminium and proton-lead collisions are presented. The data were taken with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 GeV/c to 12.9 GeV/c hitting a target with a thickness of 5% of a nuclear interaction length. The tracking and identification of the produced particles was performed using a small-radius cylindrical time projection chamber (TPC) placed inside a solenoidal magnet. Incident particles were identified by an elaborate system of beam detectors. Results are obtained for the double-differential cross-sections d2σ/dpdθ at six incident proton beam momenta (3 GeV/c, 5 GeV/c, 8 GeV/c, 8.9 GeV/c (Be only), 12 GeV/c and 12.9 GeV/c (Al only)) and compared to previously available data.