Explore the vast range of titles available.

In order to ensure optimal and secure functionality of Micro Grid (MG), energy management system plays vital role in managing multiple electrical load and distributed energy technologies. With the evolution of Smart Grids (SG), energy generation system that includes renewable resources is introduced in MG. This work focuses on coordinated energy management of traditional and renewable resources. Users and MG with storage capacity is taken into account to perform energy management efficiently. First of all, two stage Stackelberg game is formulated. Every player in game theory tries to increase its payoff and also ensures user comfort and system reliability. In the next step, two forecasting techniques are proposed in order to forecast Photo Voltaic Cell (PVC) generation for announcing optimal prices. Furthermore, existence and uniqueness of Nash Equilibrium (NE) of energy management algorithm are also proved. In simulation, results clearly show that proposed game theoretic approach along with storage capacity optimization and forecasting techniques give benefit to both players, i.e., users and MG. The proposed technique Gray wolf optimized Auto Regressive Integrated Moving Average (GARIMA) gives 40% better result and Cuckoo Search Auto Regressive Integrated Moving Average (CARIMA) gives 30% better results as compared to existing techniques.

The smart grid (SG) has emerged as a key enabling technology facilitating the integration of variable energy resources with the objective of load management and reduced carbon-dioxide (CO 2 ) emissions. However, dynamic load consumption trends and inherent intermittent nature of renewable generations may cause uncertainty in active resource management. Eventually, these uncertainties pose serious challenges to the energy management system. To address these challenges, this work establishes an efficient load scheduling scheme by jointly considering an on-site photo-voltaic (PV) system and an energy storage system (ESS). An optimum PV-site matching technique was used to optimally select the highest capacity and lowest cost PV module. Furthermore, the best-fit of PV array in regard with load is anticipated using least square method (LSM). Initially, the mathematical models of PV energy generation, consumption and ESS are presented along with load categorization through Zero and Finite shift methods. Then, the final problem is formulated as a multiobjective optimization problem which is solved by using the proposed Dijkstra algorithm (DA). The proposed algorithm quantifies day-ahead electricity market consumption cost, used energy mixes, curtailed load, and grid imbalances. However, to further analyse and compare the performance of proposed model, the results of the proposed algorithm are compared with the genetic algorithm (GA), binary particle swarm optimization (BPSO), and optimal pattern recognition algorithm (OPRA), respectively. Simulation results show that DA achieved 51.72% cost reduction when grid and renewable sources are used. Similarly, DA outperforms other algorithms in terms of maximum peak to average ratio (PAR) reduction, which is 10.22%.

This paper presents real time information based energy management algorithms to reduce electricity cost and peak to average ratio (PAR) while preserving user comfort in a smart home. We categorize household appliances into thermostatically controlled (tc), user aware (ua), elastic (el), inelastic (iel) and regular (r) appliances/loads. An optimization problem is formulated to reduce electricity cost by determining the optimal use of household appliances. The operational schedules of these appliances are optimized in response to the electricity price signals and customer preferences to maximize electricity cost saving and user comfort while minimizing curtailed energy. Mathematical optimization models of tc appliances, i.e., air-conditioner and refrigerator, are proposed which are solved by using intelligent programmable communication thermostat ( iPCT). We add extra intelligence to conventional programmable communication thermostat (CPCT) by using genetic algorithm (GA) to control tc appliances under comfort constraints. The optimization models for ua, el, and iel appliances are solved subject to electricity cost minimization and PAR reduction. Considering user comfort, el appliances are considered where users can adjust appliance waiting time to increase or decrease their comfort level. Furthermore, energy demand of r appliances is fulfilled via local supply where the major objective is to reduce the fuel cost of various generators by proper scheduling. Simulation results show that the proposed algorithms efficiently schedule the energy demand of all types of appliances by considering identified constraints (i.e., PAR, variable prices, temperature, capacity limit and waiting time).

Smart grid (SG) vision has come to incorporate various communication technologies, which facilitate residential users to adopt different scheduling schemes in order to manage energy usage with reduced carbon emission. In this work, we have proposed a residential load management mechanism with the incorporation of energy resources (RESs) i.e., solar energy. For this purpose, a real-time electricity price (RTP), energy demand, user preferences and renewable energy parameters are taken as an inputs and genetic algorithm (GA) has been used to manage and schedule residential load with the objective of cost, user discomfort, and peak-to-average ratio (PAR) reduction. Initially, RTP is used to reduce the energy consumption cost. However, to minimize the cost along with reducing the peaks, a combined pricing model, i.e., RTP with inclining block rate (IBR) has been used which incorporates user preferences and RES to optimally schedule load demand. User comfort and cost reduction are contradictory objectives, and difficult to maximize, simultaneously. Considering this trade-off, a combined pricing scheme is modelled in such a way that users are given priority to achieve their objective as per their requirements. To validate and analyze the performance of the proposed algorithm, we first propose mathematical models of all utilized loads, and then multi-objective optimization problem has been formulated. Furthermore, analytical results regarding the objective function and the associated constraints have also been provided to validate simulation results. Simulation results demonstrate a significant reduction in the energy cost along with the achievement of both grid stability in terms of reduced peak and high comfort.

In this paper, we propose mathematical optimization models of household energy units to optimally control the major residential energy loads while preserving the user preferences. User comfort is modelled in a simple way, which considers appliance class, user preferences and weather conditions. The wind-driven optimization (WDO) algorithm with the objective function of comfort maximization along with minimum electricity cost is defined and implemented. On the other hand, for maximum electricity bill and peak reduction, min-max regret-based knapsack problem (K-WDO) algorithm is used. To validate the effectiveness of the proposed algorithms, extensive simulations are conducted for several scenarios. The simulations show that the proposed algorithms provide with the best optimal results with a fast convergence rate, as compared to the existing techniques.

This paper presents the integration of shunt capacitors in the radial distribution grids (RDG) with constant and time-varying load consideration for the reduction of power losses and total annual cost, which turns to enhance the voltage profile and annual net savings. To gather the stated goals, three objective functions are formulated with system constraints. To solve this identified problem, a novel optimization technique based on the modification of particle swarm optimization is proposed. The solution methodology is divided into two phases. In phase one, potential candidate buses are nominated using the loss sensitivity factor method and in phase two the proposed technique first selects the optimal buses for the capacitor placement among the potential buses then it decides the optimal sizing of the capacitors as well. To demonstrate the performance in terms of efficiency and strength, the proposed technique is tested on IEEE 15, 33, and 69 bus system for the optimal placement and sizing of capacitors (OPSC) problem. The results are achieved in terms of annual net savings for 15 bus (47.66%case−1, 32.76%case−2, 26.46%case−3), 33 bus (33.09% case−1, 27.06%case−2, 24.15%case−3), and 69 bus (34.51% case−1, 29.43%case−2, 25.83%case−3) which are comparable to other state of the art methods, and it also indicates the success of the proposed technique.

In most demand response (DR) based residential load management systems, shifting a considerable amount of load in low price intervals reduces end user cost, however, it may create rebound peaks and user dissatisfaction. To overcome these problems, this work presents a novel approach to optimizing load demand and storage management in response to dynamic pricing using machine learning and optimization algorithms. Unlike traditional load scheduling mechanisms, the proposed algorithm is based on finding suggested low tariff area using artificial neural network (ANN). Where the historical load demand individualized power consumption profiles of all users and real time pricing (RTP) signal are used as input parameters for a forecasting module for training and validating the network. In a response, the ANN module provides a suggested low tariff area to all users such that the electricity tariff below the low tariff area is market based. While the users are charged high prices on the basis of a proposed load based pricing policy (LBPP) if they violate low tariff area, which is based on RTP and inclining block rate (IBR). However, we first developed the mathematical models of load, pricing and energy storage systems (ESS), which are an integral part of the optimization problem. Then, based on suggested low tariff area, the problem is formulated as a linear programming (LP) optimization problem and is solved by using both deterministic and heuristic algorithms. The proposed mechanism is validated via extensive simulations and results show the effectiveness in terms of minimizing the electricity bill as well as intercepting the creation of minimal-price peaks. Therefore, the proposed energy management scheme is beneficial to both end user and utility company.

Floods can cause significant problems for humans and can damage the economy. Implementing a reliable flood monitoring warning system in risk areas can help to reduce the negative impacts of these natural disasters. Artificial intelligence algorithms and statistical approaches are employed by researchers to enhance flood forecasting. In this study, a dataset was created using unique features measured by sensors along the Hunza River in Pakistan over the past 31 years. The dataset was used for classification and regression problems. Two types of machine learning algorithms were tested for classification: classical algorithms (Random Forest, RF and Support Vector Classifier, SVC) and deep learning algorithms (Multi-Layer Perceptron, MLP). For the regression problem, the result of MLP and Support Vector Regression (SVR) algorithms were compared based on their mean square, root mean square and mean absolute errors. The results obtained show that the accuracy of the RF classifier is 0.99, while the accuracies of the SVC and MLP methods are 0.98; moreover, in the case of flood prediction, the SVR algorithm outperforms the MLP approach.

In this paper, we present an energy optimization technique to schedule three types of household appliances (user dependent, interactive schedulable and unschedulable) in response to the dynamic behaviours of customers, electricity prices and weather conditions. Our optimization technique schedules household appliances in real time to optimally control their energy consumption, such that the electricity bills of end users are reduced while not compromising on user comfort. More specifically, we use the binary multiple knapsack problem formulation technique to design an objective function, which is solved via the constraint optimization technique. Simulation results show that average aggregated energy savings with and without considering the human presence control system are 11.77% and 5.91%, respectively.

This paper is focused on the channel modeling techniques for implementation of narrowband power line communication (NB-PLC) over medium voltage (MV) network for the purpose of advanced metering infrastructure (AMI). Three different types of models, based on deterministic method, statistical method, and network parameters based method are investigated in detail. Transmission line (TL) theory model is used to express the MV network as a two-port network to examine characteristics of sending and receiving NB-PLC signals. Multipath signal propagation model is used to incorporate the effect of multipath signals to determine the NB-PLC transfer function. A Simulink model is proposed which considers the values of MV network to examine the characteristics of NB-PLC signals. Frequency selectivity is also introduced in the impedances to compare variations and characteristics with constant impedances based MV network. A state-of-the-art mechanism for the modeling of capacitive coupling device, and impedances of low voltage (LV) and MV networks is developed. Moreover, a comparative analysis of TL theory and multipath signal propagation models with the proposed Simulink model is presented to validate the performance and accuracy of proposed model. This research work will pave the way to improve the efficiency of next-generation NB-PLC technologies.