Explore the vast range of titles available.

Foamed concrete (FC) is a high-quality building material with densities from 300 to 1850 kg/m3, which can have potential use in civil engineering, both as insulation from heat and sound, and for load-bearing structures. However, due to the nature of the cement material and its high porosity, FC is very weak in withstanding tensile loads; therefore, it often cracks in a plastic state, during shrinkage while drying, and also in a solid state. This paper is the first comprehensive review of the use of man-made and natural fibres to produce fibre-reinforced foamed concrete (FRFC). For this purpose, various foaming agents, fibres and other components that can serve as a basis for FRFC are reviewed and discussed in detail. Several factors have been found to affect the mechanical properties of FRFC, namely: fresh and hardened densities, particle size distribution, percentage of pozzolanic material used and volume of chemical foam agent. It was found that the rheological properties of the FRFC mix are influenced by the properties of both fibres and foam; therefore, it is necessary to apply an additional dosage of a foam agent to enhance the adhesion and cohesion between the foam agent and the cementitious filler in comparison with materials without fibres. Various types of fibres allow the reduction of by autogenous shrinkage a factor of 1.2–1.8 and drying shrinkage by a factor of 1.3–1.8. Incorporation of fibres leads to only a slight increase in the compressive strength of foamed concrete; however, it can significantly improve the flexural strength (up to 4 times), tensile strength (up to 3 times) and impact strength (up to 6 times). At the same time, the addition of fibres leads to practically no change in the heat and sound insulation characteristics of foamed concrete and this is basically depended on the type of fibres used such as Nylon and aramid fibres. Thus, FRFC having the presented set of properties has applications in various areas of construction, both in the construction of load-bearing and enclosing structures.

Development of sustainable concrete as an alternative to conventional concrete helps in reducing carbon dioxide footprint associated with the use of cement and disposal of waste materials in landfill. One way to achieve that is the use of fly ash (FA) as an alternative to ordinary Portland cement (OPC) because FA is a pozzolanic material and has a high amount of alumina and silica content. Because of its excellent mechanical properties, several studies have been conducted to investigate the use of alkali-activated FA-based concrete as an alternative to conventional concrete. FA, as an industrial by-product, occupies land, thereby causing environmental pollution and health problems. FA-based concrete has numerous advantages, such as it has early strength gaining, it uses low natural resources, and it can be configurated into different structural elements. This study initially presents a review of the classifications, sources, chemical composition, curing regimes and clean production of FA. Then, physical, fresh, and mechanical properties of FA-based concretes are studied. This review helps in better understanding of the behavior of FA-based concrete as a sustainable and eco-friendly material used in construction and building industries.

Self-sensing concrete is a smart material known for its cost-effectiveness in structural health-monitoring areas, which converts the external stimuli into a stress/strain sensing parameter. Self-sensing material has excellent mechanical and electrical properties that allow it to act as a multifunctional agent satisfying both the strength and structural health-monitoring parameters. The main objective of this review is to understand the theories and principles behind the self-sensing practices. Many review papers have focused on the different types of materials and practices that rely on self-sensing technology, and only a few articles have discussed the theories involved. Understanding the mechanism and the theories behind the conduction mechanism is necessary. This review paper provides an overview of self-sensing concrete, including the principles such as piezoresistivity and piezopermittivity; the tunnelling effect, percolation threshold, and electrical circuit theories; the materials used and methods adopted; and the sensing parameters. The paper concludes with an outline of the application of self-sensing concrete and future recommendations, thus providing a better understanding of implementing the self-sensing technique in construction.

This research examined the performance of functionally graded two-stage fibrous concrete (FTSFC) against modified repeated falling-mass impacts. This study led to the concept of creating improved multiphysics model of fibre composites with better impact resistance for potential protective constructions. FTSFC was developed based on the bio-inspiring strength of turtle shells. The excellent impact resistance of FTSFC was accomplished by including a larger quantity of steel and polypropylene fibres in the outer layers. At the same time, one- and two-layered concrete were cast and compared to evaluate the efficiency of three-layered FTSFC. To minimize the dispersed test results, a modified form of the 544 drop-mass impact test was recommended by the American Concrete Institute (ACI). The modification was a knife-edge notched specimen instead of a solid cylindrical specimen without a notch. This modification predefined a crack path and reduced the dispersion of results. Cracking and failure impact numbers, ductility index, and failure mode were the testing criteria. The suggested modification to the ACI impact test decreased the coefficient of variance, showing that the dispersion of test results was reduced significantly. This study led to the concept of creating improved, fibre composites with better impact resistance for potential protective constructions.

A material-tailored special concrete composite that uses a synthetic fiber to make the concrete ductile and imposes strain-hardening characteristics with eco-friendly ingredients is known as an “engineered geopolymer composite (EGC)”. Mix design of special concrete is always tedious, particularly without standards. Researchers used several artificial intelligence tools to analyze and design the special concrete. This paper attempts to design the material EGC through an artificial neural network with a cross-validation technique to achieve the desired compressive and tensile strength. A database was formulated with seven mix-design influencing factors collected from the literature. The five best artificial neural network (ANN) models were trained and analyzed. A gradient descent momentum and adaptive learning rate backpropagation (GDX)–based ANN was developed to cross-validate those five best models. Upon regression analysis, ANN [2:16:16:7] model performed best, with 74% accuracy, whereas ANN [2:16:25:7] performed best in cross-validation, with 80% accuracy. The best individual outputs were “tacked-together” from the best five ANN models and were also analyzed, achieving accuracy up to 88%. It is suggested that when these seven mix-design influencing factors are involved, then ANN [2:16:25:7] can be used to predict the mix which can be cross-verified with GDX-ANN [7:14:2] to ensure accuracy and, due to the few mix trials required, help design the SHGC with lower costs, less time, and fewer materials.

Noise is continuously treated as an annoyance to humans and indeed commotion contamination shows up within the environment, causing inconvenience. This is likewise interesting to the engineering tactic that inclines to develop this noise proliferation. The basics of the sound-retaining proliferation, sound-absorbing properties, and its variables were rarely considered by previous researchers. Thus, the acoustic performance and sound insulation of constructions have gained significance over the last five decades due to the trend for accommodating inner-city flat and multi-story residential building condominiums. Due to this dilemma, the proliferation of high-driven entertaining schemes has engaged extraordinary demands on building for its acoustic performance. Yet, construction industries worldwide have started to mainly use sound-absorbing concrete to reduce the frequency of sounds in opened-and-closed areas and increase sound insulation. As reported, the concrete acoustic properties generally rely on its density, exhibiting that the lighter ones, such as cellular concrete, will absorb more sound than high-density concretes. However, this paper has an objective to afford a wide-ranging review of sound-absorbing acoustic concretes, including the measurement techniques and insulation characteristics of building materials and the sound absorption properties of construction materials. It is also intended to extensively review to provide insights into the possible use of a typical sound-absorbing acoustic concrete in today’s building industry to enhance housing occupants’ efficiency, comfort, well-being, and safety.

This research tests energy optimised furnace (EOF) steel slag as substitution for natural coarse aggregate in concrete. Steel slag’s usefulness as a substitute for natural coarse aggregate in concrete is the primary goal of this research. According to IS:2386-1963, the characterization of EOF steel slag, as coarse, is done by examining the shape and size of a particle, mechanical properties, physical properties, soundness, and alkali-aggregate reactivity. Tests for detection of staining material in steel slag and hardness of inter-facial transition zone in hardened cement paste were also carried out. The chemical analysis of the steel slag reveals the stability of oxides present in the steel slag. Microstructural characterization by SEM (scanning electron microscope) analysis of steel slag aggregate was also employed to support the characterization and XRD analysis, and it was found that the EOF steel slag is crystalline. The digital image processing technique (DIP) is adopted to study the shape indices, circularity, sphericity, shape factor, and roundness of natural and EOF steel slag aggregate. According to the characterization and strength investigation, steel slag aggregate outperforms natural coarse aggregate.

The characteristics of a concrete mix are purely dependent on the hydration of cement that is carried forward by using the water quality used in the mix. Several researchers have focused on incorporating pozzolanic or nanomaterials to improve the hydration mechanisms and impart high strength to concrete. A new technology has been introduced to improve the properties of concrete by magnetic-field-treated water (MFTW). Due to magnetization, water particles become charged and the molecules inside the water cluster decrease from 13 to 5 or 6, which eventually decreases the hardness of water, thus improving the strength of concrete when compared to the use of normal water (NW). In advanced construction techniques and practices, the application of Magnetic Water (MW) plays an important role in boosting physicochemical properties. This research work focused on evaluating the standards of water quality through physiochemical analysis, such as Electrical Conductivity (EC), Viscosity, pH, and Total Dissolved Solids (TDS) with the MW at different exposure periods (60 min (MW60), 45 min (MW45), 30 min (MW30), 15 min (MW15), and instant exposure (MWI)). Experiments were carried out to evaluate the fresh, hardened, and microstructural behavior of concrete made with magnetic water (MW) using a permanent magnet of PERMAG (N407) under a field intensity of 0.9 Tesla. In addition, optical properties such as X-ray Diffraction (XRD) and Ultraviolet (UV) absorption were considered for the MW60 mix to ensure water magnetization. Characterization methods such as Fourier Transform Infrared Spectroscopy (FT-IR), Thermogravimetric Analysis (TGA), and Scanning Electron Microscopy (SEM) were employed for NWC and MWC to quantify the hydrated products. From the results, it was observed that the magnetic effect on water characteristics showed significant improvement in the concrete properties with the increase in exposure duration. There were increments of 25.6% and 24.1% in workability and compressive strength, respectively, for the MW60 mix compared to normal water concrete (NWC).

The present work investigates the mechanical and chemical characteristics and durability of high-strength geopolymer concrete (HSGPC) developed using high-volume copper slag and micro silica. The objective of the study was to explore the feasibility of deploying high-volume copper slag as a replacement for river sand in the fabrication of high-strength geopolymer concrete. In total, 11 different trials were cast by varying copper slag up to 100% as a potential alternative for the river sand. The mixture of alkaline activators for the preparation of the geopolymer concrete (GPC), such as sodium silicate (Na2SiO3) and sodium hydroxide (12 M NaOH), was used in the ratio 2.5:1. The optimum mix was selected from different copper slag dosages based on the characteristics of the HSGPC, such as mechanical strength and workability. For the selected optimized mix, micro silica was added up to 5% by volume of the binder (i.e., 1%, 2%, 3%, 4% and 5%) to improve the particle packing density of the developed HSGPC mix which in turn further enhances the strength and durability properties. Two different curing methods, including (a) ambient curing and (b) steam curing at 80 °C, were deployed for achieving the polymerization reaction (i.e., the formation of Na-Al-Si-H gel). Experimental outcomes reveal a maximum compressive strength of 79.0 MPa when 2% micro silica was added to the optimized GPC mix. In addition to the mechanical tests, the quality of the developed HSGPC was assessed using the ultrasonic pulse velocity (UPV) tests, water-absorption tests, sorptivity tests and microstructural analyses.

Recycled concrete aggregates (RCA) are used in existing green building composites to promote the environmental preservation of natural coarse aggregates (NCA). Besides, the use of RCA leads to potential solutions to the social and economic problems caused by concrete waste. It is found that insufficient information on the longevity and sustainability of RCA production is a serious issue that requires close attention due to its impact on changing aspects of the sector. However, more attention has been paid to explaining the effect of RCA on concrete durability, as well as the properties of fresh and hardened concrete. Therefore, this study aims to provide a critical review on the RCAs for the production of high-performances concrete structures. It begins by reviewing the source, originality, types, prediction of service life, features and properties of RCA, as well as the effect of RCA on concrete performance. In addition, this literature review summarizes the research findings to produce complete insights into the potential applications of RCA as raw, renewable, and sustainable building materials for producing greener concrete composite towards industrializing ecofriendly buildings today. Further, it has also highlighted the differences in the current state of knowledge between RCAs and NCAs, and offers several future research suggestions. Through this critical and analytical study, it can be said that RCA has the possible use in the production of high-performance structural concrete depending on the source and type of recycled aggregate while the RCA can be used widely and safely to produce traditional green concrete.