Explore the vast range of titles available.

Conjugated polymers and molecular semiconductors are emerging as a viable semiconductor technology in industries such as displays, electronics, renewable energy, sensing and healthcare. A key enabling factor has been significant scientific progress in improving their charge transport properties and carrier mobilities, which has been made possible by a better understanding of the molecular structure–property relationships and the underpinning charge transport physics. Here we aim to present a coherent review of how we understand charge transport in these high-mobility van der Waals bonded semiconductors. Specific questions of interest include estimates for intrinsic limits to the carrier mobilities that might ultimately be achievable; a discussion of the coupling between charge and structural dynamics; the importance of molecular conformations and mesoscale structural features; how the transport physics of conjugated polymers and small molecule semiconductors are related; and how the incorporation of counterions in doped films—as used, for example, in bioelectronics and thermoelectric devices—affects the electronic structure and charge transport properties. Organic semiconductors are making their way into applications ranging from display technology to flexible electronics and biomedical applications. This Review discusses current understanding of charge carrier transport in these materials and strategies to improve their performance.

Doping is one of the most important methods to control charge carrier concentration in semiconductors. Ideally, the introduction of dopants should not perturb the ordered microstructure of the semiconducting host. In some systems, such as modulation-doped inorganic semiconductors or molecular charge transfer crystals, this can be achieved by spatially separating the dopants from the charge transport pathways. However, in conducting polymers, dopants tend to be randomly distributed within the conjugated polymer, and as a result the transport properties are strongly affected by the resulting structural and electronic disorder. Here, we show that in the highly ordered lamellar microstructure of a regioregular thiophene-based conjugated polymer, a small-molecule p-type dopant can be incorporated by solid state diffusion into the layers of solubilizing side chains without disrupting the conjugated layers. In contrast to more disordered systems, this allows us to observe coherent, free-electron-like charge transport properties, including a nearly ideal Hall effect in a wide temperature range, a positive magnetoconductance due to weak localization and the Pauli paramagnetic spin susceptibility. Small molecules diffusing into a thin film of thiophene-based conjugated polymers act as p-type dopants without altering the ordered microstructure of the film. As a result, free-electron-like charge transport is also observed at high doping levels.

Due to their low-temperature processing properties and inherent mechanical flexibility, conjugated polymer field-effect transistors (FETs) are promising candidates for enabling flexible electronic circuits and displays. Much progress has been made on materials performance; however, there remain significant concerns about operational and environmental stability, particularly in the context of applications that require a very high level of threshold voltage stability, such as active-matrix addressing of organic light-emitting diode displays. Here, we investigate the physical mechanisms behind operational and environmental degradation of high-mobility, p-type polymer FETs and demonstrate an effective route to improve device stability. We show that water incorporated in nanometre-sized voids within the polymer microstructure is the key factor in charge trapping and device degradation. By inserting molecular additives that displace water from these voids, it is possible to increase the stability as well as uniformity to a high level sufficient for demanding industrial applications. Small molecular additives incorporated into films of conjugate polymers are shown to fill the voids present in the polymer network. As a result, the stability of organic transistors based on these materials is significantly improved.

Measurements and simulations of several high-mobility conjugated polymers show that their charge transport properties reflect an almost complete lack of disorder in the polymers, despite their amorphous microstructures, resulting from the resilience of the planar polymer backbone conformations to side-chain disorder. Bringing order to disorder So-called 'conjugated polymers' have attracted much interest in recent decades. They are organic macromolecules with covalent-bond-containing backbone structures that combine the flexibility and processibility of plastics with the useful electronic properties of semiconductors. Polymeric materials tend to be naturally disordered however, and such disorder ultimately limits their electronic performance. Deepak Venkateshvaran and colleagues now show that several of the better-performing conjugated polymers are actually behaving electronically as if they were free of disorder, despite their amorphous microstructure. With the aid of simulations, the authors identify the molecular origins of this surprising 'disorder-free' behaviour, and offer guidelines for how this might be engineered into other conjugated polymeric systems. Conjugated polymers enable the production of flexible semiconductor devices that can be processed from solution at low temperatures. Over the past 25 years, device performance has improved greatly as a wide variety of molecular structures have been studied 1 . However, one major limitation has not been overcome; transport properties in polymer films are still limited by pervasive conformational and energetic disorder 2 , 3 , 4 , 5 . This not only limits the rational design of materials with higher performance, but also prevents the study of physical phenomena associated with an extended π-electron delocalization along the polymer backbone. Here we report a comparative transport study of several high-mobility conjugated polymers by field-effect-modulated Seebeck, transistor and sub-bandgap optical absorption measurements. We show that in several of these polymers, most notably in a recently reported, indacenodithiophene-based donor–acceptor copolymer with a near-amorphous microstructure 6 , the charge transport properties approach intrinsic disorder-free limits at which all molecular sites are thermally accessible. Molecular dynamics simulations identify the origin of this long sought-after regime as a planar, torsion-free backbone conformation that is surprisingly resilient to side-chain disorder. Our results provide molecular-design guidelines for ‘disorder-free’ conjugated polymers.

Stretchable semiconducting polymers have been developed as a key component to enable skin-like wearable electronics, but their electrical performance must be improved to enable more advanced functionalities. Here, we report a solution processing approach that can achieve multi-scale ordering and alignment of conjugated polymers in stretchable semiconductors to substantially improve their charge carrier mobility. Using solution shearing with a patterned microtrench coating blade, macroscale alignment of conjugated-polymer nanostructures was achieved along the charge transport direction. In conjunction, the nanoscale spatial confinement aligns chain conformation and promotes short-range π–π ordering, substantially reducing the energetic barrier for charge carrier transport. As a result, the mobilities of stretchable conjugated-polymer films have been enhanced up to threefold and maintained under a strain up to 100%. This method may also serve as the basis for large-area manufacturing of stretchable semiconducting films, as demonstrated by the roll-to-roll coating of metre-scale films.Solution shearing of semiconducting polymers with a patterned blade induces improved alignment of the polymeric chains at the nano- and macroscale. This leads to increased charge transport in stretchable, roll-to-roll deposited organic transistors.

Charge transport in conjugated polymer semiconductors has traditionally been thought to be limited to a low-mobility regime by pronounced energetic disorder. Much progress has recently been made in advancing carrier mobilities in field-effect transistors through developing low-disorder conjugated polymers. However, in diodes these polymers have to date not shown much improved mobilities, presumably reflecting the fact that in diodes lower carrier concentrations are available to fill up residual tail states in the density of states. Here, we show that the bulk charge transport in low-disorder polymers is limited by water-induced trap states and that their concentration can be dramatically reduced through incorporating small molecular additives into the polymer film. Upon incorporation of the additives we achieve space-charge limited current characteristics that resemble molecular single crystals such as rubrene with high, trap-free SCLC mobilities up to 0.2 cm 2 /Vs and a width of the residual tail state distribution comparable to k B T . Charge transport in organic diodes based on conjugated polymers is severely limited by the high water-related trap concentration and energetic disorder. Here, the authors report high-mobility trap-free charge transport in low-disorder conjugated polymers by incorporating small molecular additives.

Thermal vibrations and the dynamic disorder they create can detrimentally affect the transport properties of van der Waals bonded molecular semiconductors. The low-energy nature of these vibrations makes it difficult to access them experimentally, which is why we still lack clear molecular design rules to control and reduce dynamic disorder. In this study we discuss the promising organic semiconductors rubrene, 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothio-phene and 2,9-di-decyl-dinaphtho-[2,3-b:20,30-f]-thieno-[3,2-b]-thiophene in terms of an exceptionally low degree of dynamic disorder. In particular, we analyse diffuse scattering in transmission electron microscopy, to show that small molecules that have their side chains attached along the long axis of their conjugated core are better encapsulated in their crystal structure, which helps reduce large-amplitude thermal motions. Our work provides a general strategy for the design of new classes of very high mobility organic semiconductors with a low degree of dynamic disorder. Thermal vibration is harmful to charge transport in molecular semiconductors, which hinders the use of these materials in flexible electronics. Here, Illig et al. show that the vibration is suppressed when molecular side chains are attached to the long axis of conjugated cores.

Conventional semiconducting polymer synthesis typically involves transition metal-mediated coupling reactions that link aromatic units with single bonds along the backbone. Rotation around these bonds contributes to conformational and energetic disorder and therefore potentially limits charge delocalisation, whereas the use of transition metals presents difficulties for sustainability and application in biological environments. Here we show that a simple aldol condensation reaction can prepare polymers where double bonds lock-in a rigid backbone conformation, thus eliminating free rotation along the conjugated backbone. This polymerisation route requires neither organometallic monomers nor transition metal catalysts and offers a reliable design strategy to facilitate delocalisation of frontier molecular orbitals, elimination of energetic disorder arising from rotational torsion and allowing closer interchain electronic coupling. These characteristics are desirable for high charge carrier mobilities. Our polymers with a high electron affinity display long wavelength NIR absorption with air stable electron transport in solution processed organic thin film transistors. Semiconducting polymers are usually prepared by transition metal mediated coupling reactions that cause problems for sustainability and biological applications. Here the authors synthesise fused electron deficient polymers that are air stable and have high electron affinities, via metal free aldol polymerisation reactions.

Efficient conjugated polymer optoelectronic devices benefit from concomitantly high luminescence and high charge carrier mobility. This is difficult to achieve, as interchain interactions, which are needed to ensure efficient charge transport, tend also to reduce radiative recombination and lead to solid-state quenching effects. Many studies detail strategies for reducing these interactions to increase luminescence, or modifying chain packing motifs to improve percolation charge transport; however achieving these properties together has proved elusive. Here, we show that properly designed amorphous donor- alt -acceptor conjugated polymers can circumvent this problem; combining a tuneable energy gap, fast radiative recombination rates and luminescence quantum efficiencies >15% with high carrier mobilities exceeding 2.4 cm 2 /Vs. We use photoluminescence from exciton states pinned to close-crossing points to study the interplay between mobility and luminescence. These materials show promise towards realising advanced optoelectronic devices based on conjugated polymers, including electrically-driven polymer lasers. Designing conjugated polymers with high charge carrier mobility and fluorescence quantum efficiency, though attractive for optoelectronics, remains challenging. Here, the authors report a strategy for designing donor-acceptor copolymers whose optoelectronic properties exceed the state-of-the-art.

Molecular semiconductors synergize a variety of uniquely advantageous properties such as excellent absorption and emission properties, soft and deformable mechanical properties, and mixed ionic and electrical conduction. Over the past two decades, this outstanding set of features has put molecular semiconductors in the spotlight for a variety of optoelectronics and sensing applications. When it comes to mass-market adaptation, however, a challenge in these soft and van der Waals-bonded materials remains their electrical as well as environmental stability and degradation. This Prospective will summarize some of our current understanding of why organic semiconductors degrade with a strong emphasis put on the quintessential role played by water in this process. Furthermore, it will be revisited by which mechanisms water-related stability shortcomings might be addressed in the future and how these lessons can be translated to relevant hybrid systems such as perovskites and carbon nanotubes. Throughout this discussion, some parallels and key differences between organic and hybrid materials will be highlighted, and it will be elaborated on how this affects the associated device stability.