Explore the vast range of titles available.

Microwave photonic technologies, which upshift the carrier into the optical domain, have facilitated the generation and processing of ultra-wideband electronic signals at vastly reduced fractional bandwidths. For microwave photonic applications such as radars, optical communications and low-noise microwave generation, optical frequency combs are useful building blocks. By virtue of soliton microcombs, frequency combs can now be built using CMOS-compatible photonic integrated circuits. Yet, currently developed integrated soliton microcombs all operate with repetition rates significantly beyond those that conventional electronics can detect, preventing their use in microwave photonics. Access to this regime is challenging due to the required ultra-low waveguide loss and large dimensions of the nanophotonic resonators. Here, we demonstrate soliton microcombs operating in two widely employed microwave bands, the X-band (~10 GHz, for radar) and the K-band (~20 GHz, for 5G). Driven by a low-noise fibre laser, these devices produce more than 300 frequency lines within the 3 dB bandwidth, and generate microwave signals featuring phase noise levels comparable to modern electronic microwave oscillators. Our results establish integrated microcombs as viable low-noise microwave generators. Furthermore, the low soliton repetition rates are critical for future dense wavelength-division multiplexing channel generation schemes and could significantly reduce the system complexity of soliton-based integrated frequency synthesizers and atomic clocks.Nanophotonic microwave synthesizers in the X-band (10 GHz, for radar) and K-band (20 GHz, for 5G), based on integrated soliton microcombs driven by a low-noise fibre laser, link the fields of microwave photonics and integrated microcombs.

Intracranial aneurysms (IA) are local dilatations in cerebral arteries that predominantly affect the circle of Willis. Occurring in approximately 2–5% of adults, these weakened areas are susceptible to rupture, leading to subarachnoid hemorrhage (SAH), a type of hemorrhagic stroke. Due to its early age of onset and poor prognosis, SAH accounts for > 25% of years lost for all stroke victims under the age of 65. In this review, we describe the cerebrovascular pathology associated with intracranial aneurysms. To understand IA genetics, we summarize syndromes with elevated incidence, genome-wide association studies (GWAS), whole exome studies on IA-affected families, and recent research that established definitive roles for Thsd1 (Thrombospondin Type 1 Domain Containing Protein 1) and Sox17 (SRY-box 17) in IA using genetically engineered mouse models. Lastly, we discuss the underlying molecular mechanisms of IA, including defects in vascular endothelial and smooth muscle cells caused by dysfunction in mechanotransduction, Thsd1/FAK (Focal Adhesion Kinase) signaling, and the Transforming Growth Factor β (TGF-β) pathway. As illustrated by THSD1 research, cell adhesion may play a significant role in IA.

Enhancing the intrinsic activity and space time yield of Cu based heterogeneous methanol synthesis catalysts through CO 2 hydrogenation is one of the major topics in CO 2 conversion into value-added liquid fuels and chemicals. Here we report inverse ZrO 2 /Cu catalysts with a tunable Zr/Cu ratio have been prepared via an oxalate co-precipitation method, showing excellent performance for CO 2 hydrogenation to methanol. Under optimal condition, the catalyst composed by 10% of ZrO 2 supported over 90% of Cu exhibits the highest mass-specific methanol formation rate of 524 g MeOH kg cat −1 h −1 at 220 °C, 3.3 times higher than the activity of traditional Cu/ZrO 2 catalysts (159 g MeOH kg cat −1 h −1 ). In situ XRD-PDF, XAFS and AP-XPS structural studies reveal that the inverse ZrO 2 /Cu catalysts are composed of islands of partially reduced 1–2 nm amorphous ZrO 2 supported over metallic Cu particles. The ZrO 2 islands are highly active for the CO 2 activation. Meanwhile, an intermediate of formate adsorbed on the Cu at 1350 cm −1 is discovered by the in situ DRIFTS. This formate intermediate exhibits fast hydrogenation conversion to methoxy. The activation of CO 2 and hydrogenation of all the surface oxygenate intermediates are significantly accelerated over the inverse ZrO 2 /Cu configuration, accounting for the excellent methanol formation activity observed. Enhancing the intrinsic activity and space time yield of Cu based heterogeneous methanol synthesis catalysts is one of the major topics in CO 2 hydrogenation. Here the authors develop a highly active inverse catalyst composed of fine ZrO 2 islands dispersed on metallic Cu nanoparticles.

Reversing the thermal induced sintering phenomenon and forming high temperature stable fine dispersed metallic centers with unique structural and electronic properties is one of the ever-lasting targets of heterogeneous catalysis. Here we report that the dispersion of metallic Ni particles into under-coordinated two-dimensional Ni clusters over γ-Mo 2 N is a thermodynamically favorable process based on the AIMD simulation. A Ni-4nm/γ-Mo 2 N model catalyst is synthesized and used to further study the reverse sintering effect by the combination of multiple in-situ characterization methods, including in-situ quick XANES and EXAFS, ambient pressure XPS and environmental SE/STEM etc. The under-coordinated two-dimensional layered Ni clusters on molybdenum nitride support generated from the Ni-4nm/γ-Mo 2 N has been demonstrated to be a thermally stable catalyst in 50 h stability test in CO 2 hydrogenation, and exhibits a remarkable catalytic selectivity reverse compared with traditional Ni particles-based catalyst, leading to a chemo-specific CO 2 hydrogenation to CO. Reversing the thermal induced sintering phenomenon and forming high temperature stable fine dispersed metallic centers is one of the ever-lasting targets in heterogeneous catalysis. Here the authors report the dispersion of metallic Ni particles into under-coordinated two-dimensional Ni clusters over γ-Mo 2 N.

Low-loss photonic integrated circuits and microresonators have enabled a wide range of applications, such as narrow-linewidth lasers and chip-scale frequency combs. To translate these into a widespread technology, attaining ultralow optical losses with established foundry manufacturing is critical. Recent advances in integrated Si 3 N 4 photonics have shown that ultralow-loss, dispersion-engineered microresonators with quality factors Q  > 10 × 10 6 can be attained at die-level throughput. Yet, current fabrication techniques do not have sufficiently high yield and performance for existing and emerging applications, such as integrated travelling-wave parametric amplifiers that require meter-long photonic circuits. Here we demonstrate a fabrication technology that meets all requirements on wafer-level yield, performance and length scale. Photonic microresonators with a mean Q factor exceeding 30 × 10 6 , corresponding to 1.0 dB m −1 optical loss, are obtained over full 4-inch wafers, as determined from a statistical analysis of tens of thousands of optical resonances, and confirmed via cavity ringdown with 19 ns photon storage time. The process operates over large areas with high yield, enabling 1-meter-long spiral waveguides with 2.4 dB m −1 loss in dies of only 5 × 5 mm 2 size. Using a response measurement self-calibrated via the Kerr nonlinearity, we reveal that the intrinsic absorption-limited Q factor of our Si 3 N 4 microresonators can exceed 2 × 10 8 . This absorption loss is sufficiently low such that the Kerr nonlinearity dominates the microresonator’s response even in the audio frequency band. Transferring this Si 3 N 4 technology to commercial foundries can significantly improve the performance and capabilities of integrated photonics. For widespread technological application of nonlinear photonic integrated circuits, ultralow optical losses and high fabrication throughput are required. Here, the authors present a CMOS fabrication technique that realizes integrate photonic microresonators on waver-level with mean quality factors exceeding 30 million and 1 dB/m optical losses.

Optical frequency combs have a wide range of applications in science and technology 1 . An important development for miniature and integrated comb systems is the formation of dissipative Kerr solitons in coherently pumped high-quality-factor optical microresonators 2 – 9 . Such soliton microcombs 10 have been applied to spectroscopy 11 – 13 , the search for exoplanets 14 , 15 , optical frequency synthesis 16 , time keeping 17 and other areas 10 . In addition, the recent integration of microresonators with lasers has revealed the viability of fully chip-based soliton microcombs 18 , 19 . However, the operation of microcombs requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components, and microcombs operating at rates that are compatible with electronic circuits—as is required in nearly all comb systems—have not yet been integrated with pump lasers because of their high power requirements. Here we experimentally demonstrate and theoretically describe a turnkey operation regime for soliton microcombs co-integrated with a pump laser. We show the appearance of an operating point at which solitons are immediately generated by turning the pump laser on, thereby eliminating the need for photonic and electronic control circuitry. These features are combined with high-quality-factor Si 3 N 4 resonators to provide microcombs with repetition frequencies as low as 15 gigahertz that are fully integrated into an industry standard (butterfly) package, thereby offering compelling advantages for high-volume production. A turnkey regime for soliton microcombs is demonstrated, in which solitons are generated by switching on a co-integrated pump laser, eliminating the need for photonic and electronic control circuitry.

Photonic integrated circuits have the potential to pervade into multiple applications traditionally limited to bulk optics. Of particular interest for new applications are ferroelectrics such as Lithium Niobate, which exhibit a large Pockels effect, but are difficult to process via dry etching. Here we demonstrate that diamond-like carbon (DLC) is a superior material for the manufacturing of photonic integrated circuits based on ferroelectrics, specifically LiNbO 3 . Using DLC as a hard mask, we demonstrate the fabrication of deeply etched, tightly confining, low loss waveguides with losses as low as 4 dB/m. In contrast to widely employed ridge waveguides, this approach benefits from a more than one order of magnitude higher area integration density while maintaining efficient electro-optical modulation, low loss, and offering a route for efficient optical fiber interfaces. As a proof of concept, we demonstrate a III-V/LiNbO 3 based laser with sub-kHz intrinsic linewidth and tuning rate of 0.7 PHz/s with excellent linearity and CMOS-compatible driving voltage. We also demonstrated a MZM modulator with a 1.73 cm length and a halfwave voltage of 1.94 V. Lithium niobate (LN) is difficult to process via dry etching. Here, authors demonstrate the fabrication of deeply etched, tightly confining, low loss LN photonic integrated circuits with losses 4 dB/m using diamond like carbon as a hard mask.

Frequency modulated continuous wave laser ranging (FMCW LiDAR) enables distance mapping with simultaneous position and velocity information, is immune to stray light, can achieve long range, operate in the eye-safe region of 1550 nm and achieve high sensitivity. Despite its advantages, it is compounded by the simultaneous requirement of both narrow linewidth low noise lasers that can be precisely chirped. While integrated silicon-based lasers, compatible with wafer scale manufacturing in large volumes at low cost, have experienced major advances and are now employed on a commercial scale in data centers, and impressive progress has led to integrated lasers with (ultra) narrow sub-100 Hz-level intrinsic linewidth based on optical feedback from photonic circuits, these lasers presently lack fast nonthermal tuning, i.e. frequency agility as required for coherent ranging. Here, we demonstrate a hybrid photonic integrated laser that exhibits very narrow intrinsic linewidth of 25 Hz while offering linear, hysteresis-free, and mode-hop-free-tuning beyond 1 GHz with up to megahertz actuation bandwidth constituting 1.6 × 10 15 Hz/s tuning speed. Our approach uses foundry-based technologies - ultralow-loss (1 dB/m) Si 3 N 4 photonic microresonators, combined with aluminium nitride (AlN) or lead zirconium titanate (PZT) microelectromechanical systems (MEMS) based stress-optic actuation. Electrically driven low-phase-noise lasing is attained by self-injection locking of an Indium Phosphide (InP) laser chip and only limited by fundamental thermo-refractive noise at mid-range offsets. By utilizing difference-drive and apodization of the photonic chip to suppress mechanical vibrations of the chip, a flat actuation response up to 10 MHz is achieved. We leverage this capability to demonstrate a compact coherent LiDAR engine that can generate up to 800 kHz FMCW triangular optical chirp signals, requiring neither any active linearization nor predistortion compensation, and perform a 10 m optical ranging experiment, with a resolution of 12.5 cm. Our results constitute a photonic integrated laser system for scenarios where high compactness, fast frequency actuation, and high spectral purity are required. Stable and tunable integrated lasers are fundamental building blocks for applications from spectroscopy to imaging and communication. Here the authors present a narrow linewidth hybrid photonic integrated laser with low frequency noise and fast linear wavelength tuning. They then provide an efficient FMCW LIDAR demonstration.

Wastewater treatment plants (WWTPs) play a vital role in public health because it can emit a large quantity of bioaerosols. Exposure to bioaerosols from WWTPs is a potential health risk to WWTP workers and surrounding residents. In this study, the seasonal fluctuation of aerosolization ratios of several bioaerosols and quantitative health risks of the WWTP workers and the surrounding residents exposed to total coliform, fecal coliform, and enterococcal bioaerosols were analyzed. Results showed that the aerosolization ratio of airborne bacteria was higher in the cold seasons and lower in the warm seasons, whereas the aerosolization ratio of airborne fungi was the highest in summer. The aerosolization ratio of airborne fungi was evidently higher than that of other bioaerosols. Moreover, the aerosolization ratio under the inverted umbrella aerator mode was generally higher than that under the microporous aerator mode. For each exposure scenario, the health risks of males were generally 7.2–26.7% higher than those of females. The health risks of the exposure population exposed to total coliform and enterococcal bioaerosols were generally higher in warm seasons, whereas those of the population exposed to fecal coliform bioaerosol were the highest in winter. Additionally, the health risks of exposure population without masks under the imprudent/conservative estimate all exceeded the benchmarks. However, when equipped with masks, all the exposure populations’ health risks decreased 1–2 orders of magnitude and approached acceptable levels. This research methodically provides new scientific data on the aerosolization ratio of microorganism bioaerosols in a WWTP and promotes the comprehension of their quantitative health risks under imprudent/conservative estimates.

Electrochemical two-electron water oxidation reaction (2e-WOR) has drawn significant attention as a promising process to achieve the continuous on-site production of hydrogen peroxide (H 2 O 2 ). However, compared to the cathodic H 2 O 2 generation, the anodic 2e-WOR is more challenging to establish catalysts due to the severe oxidizing environment. In this study, we combine density functional theory (DFT) calculations with experiments to discover a stable and efficient perovskite catalyst for the anodic 2e-WOR. Our theoretical screening efforts identify LaAlO 3 perovskite as a stable, active, and selective candidate for catalyzing 2e-WOR. Our experimental results verify that LaAlO 3 achieves an overpotential of 510 mV at 10 mA cm −2 in 4 M K 2 CO 3 /KHCO 3 , lower than those of many reported metal oxide catalysts. In addition, LaAlO 3 maintains a stable H 2 O 2 Faradaic efficiency with only a 3% decrease after 3 h at 2.7 V vs. RHE. This computation-experiment synergistic approach introduces another effective direction to discover promising catalysts for the harsh anodic 2e-WOR towards H 2 O 2 . Hydrogen peroxide production from water electrochemical oxidation is a challenging process. Here the authors report discovery of LaAlO3 after screening a series of perovskites as active, stable, and selective catalyst for electrochemical H2O2 production from water oxidation.