Explore the vast range of titles available.

The Late Pleistocene Campanian Ignimbrite (CI) super-eruption (Southern Italy) is the largest known volcanic event in the Mediterranean area. The CI tephra is widely dispersed through western Eurasia and occurs in close stratigraphic association with significant palaeoclimatic and Palaeolithic cultural events. Here we present new high-precision 14 C (34.29 ± 0.09 14 C kyr BP, 1σ) and 40 Ar/ 39 Ar (39.85 ± 0.14 ka, 95% confidence level) dating results for the age of the CI eruption, which substantially improve upon or augment previous age determinations and permit fuller exploitation of the chronological potential of the CI tephra marker. These results provide a robust pair of 14 C and 40 Ar/ 39 Ar ages for refining both the radiocarbon calibration curve and the Late Pleistocene time-scale at ca. 40 ka. In addition, these new age constraints provide compelling chronological evidence for the significance of the combined influence of the CI eruption and Heinrich Event 4 on European climate and potentially evolutionary processes of the Early Upper Palaeolithic.

Magmatism’s role in continental rupture and ocean formation remains a critical question in Earth Sciences. The Red Sea, where Arabia is rifting from Nubia, offers an ideal setting to explore this process. This study analyses geochemical and isotopic data from gabbros and basaltic dikes in the Tihama Asir complex, formed during early Red Sea rifting (Late Oligocene). The results show that asthenospheric melts assimilated ancient lower crust before rising into shallow magma chambers with minimal upper crustal contamination. Rising asthenosphere driven by the Afar plume and by extensional stresses thermally weakened the lower crust, allowing it to decouple from the mantle, causing depth-dependent deformation. The generated asthenospheric melts underplated and intruded the thinning continental crust protracting continental rifting by re-thickening of the crust and accommodating extension. This study provides the evidence of tholeiitic underplating beneath thick continental crust during early rifting, substantially postponing the onset of seafloor spreading. Underplating and magmatic additions to thinning continental crust by Afar plume–driven asthenospheric melts delayed the onset of seafloor spreading during early Red Sea rifting.

The use of bone as raw material for implements is documented since the Early Pleistocene. Throughout the Early and Middle Pleistocene bone tool shaping was done by percussion flaking, the same technique used for knapping stone artifacts, although bone shaping was rare compared to stone tool flaking. Until recently the generally accepted idea was that early bone technology was essentially immediate and expedient, based on single-stage operations, using available bone fragments of large to medium size animals. Only Upper Paleolithic bone tools would involve several stages of manufacture with clear evidence of primary flaking or breaking of bone to produce the kind of fragments required for different kinds of tools. Our technological and taphonomic analysis of the bone assemblage of Castel di Guido, a Middle Pleistocene site in Italy, now dated by 40 Ar/ 39 Ar to about 400 ka, shows that this general idea is inexact. In spite of the fact that the number of bone bifaces at the site had been largely overestimated in previous publications, the number of verified, human-made bone tools is 98. This is the highest number of flaked bone tools made by pre-modern hominids published so far. Moreover the Castel di Guido bone assemblage is characterized by systematic production of standardized blanks (elephant diaphysis fragments) and clear diversity of tool types. Bone smoothers and intermediate pieces prove that some features of Aurignacian technology have roots that go beyond the late Mousterian, back to the Middle Pleistocene. Clearly the Castel di Guido hominids had done the first step in the process of increasing complexity of bone technology. We discuss the reasons why this innovation was not developed. The analysis of the lithic industry is done for comparison with the bone industry.

Super-eruptions disperse volcanic ash over vast areas, impacting the environment and human health. Fine ash, particularly its respirable fraction (< 4 µm), poses a significant health hazard by inhalation due to its high dispersal potential. Understanding the aerodynamic properties but also composition of ash particles is fundamental to constrain dispersal and deposition mechanisms in both proximal and distal environments. Current atmospheric dispersal models rely on empirical drag equations calibrated with geometric shape descriptors. However, these models often overlook the effects of the actual particle density, as a uniform componentry is typically assumed. In addition, particles have variable shapes but such data from super-eruptions remains limited and no standardized measurement methods exist. Here, we determine the terminal fall velocity ( v t ) of fine ash from the Campanian Ignimbrite super-eruption (~ 40 ka, Campi Flegrei), by evaluating the components and particle shapes from proximal to ultra-distal locations. To verify the attribution of the proximal sample to the CI eruption, a 40 Ar/ 39 Ar dating was performed, allowing its correlation with the ultra-distal deposits. Results show that, due to the influence of shape and density, glass particles exhibit lower v t compared to mineral phases ( v t , feldspar / v t , glass  = 1.05 ± 0.03, v t , SiO2 / v t , glass  = 1.09 ± 0.02), enabling greater travel distances. Drag equations accounting for measured particle shapes differ significantly from spherical approximations. The spherical model overestimation of v t highlights the necessity of shape-specific models to produce more accurate dispersal predictions. Extremely low v t (< 0.1 cm/s) for respirable ash fraction, which indicates prolonged atmospheric suspension and long-time resuspension potential, along with the presence of cristobalite, lead to important implications for health hazards. These findings further enhance our understanding of volcanic ash aerodynamic behaviour and the far-reaching impact of super-eruptions .

For the past decade, debates on the earliest evidence of bifacial shaping in Western Europe have focused on several key issues, such as its origin (i.e., local or introduced), or on what should define the Acheulean culture. Whatever hypotheses are proposed for its origin, the onset and technological strategies for making Large Cutting Tools (LCTs), including biface production, are key issues and are often associated with other behavioural changes, such as increased core technology complexity. Current archaeological patterns do not support the existence of transitional industries. Rather, the scant evidence suggests that biface production associated with the management of bifacial volume was widespread around 700 ka. Among the earliest sites, the site of Notarchirico in Southern Italy stands out as one of the most significant examples. 40Ar/39Ar ages and ESR dates recently provided a revised chronology for the whole sedimentary sequence and constrained the archaeological levels between ca. 610 and 670 ka. Five archaeosurfaces (A, A1, B, D and F) yielded LCTs, including bifaces, during Marcello Piperno's excavations from 1980 to 1995. In light of this new chronological framework, which is much shorter than previously thought, we propose in this contribution a revision of the bifaces by applying the \"chaine opératoire\" method for the first time (analysis of reduction processes). Our goals are to assess biface production in this early Western European locality and to characterize the strategies applied at the site throughout the sequence. A corpus of 32 tools was selected from the A-A1, B, D and F archaeosurfaces. The technological analysis shows that hominins had the capacity to manage bifacial volumes, when raw material quality was adequate. Clear differences do not emerge between the different levels in terms of shaping modes or final forms. However, we demonstrate that the oldest level (level F), with the richest corpus, lacks flint and displays a higher diversity of bifaces. This ability to manage bifacial and bilateral equilibrium, as well as the diversity of the morphological results, is observed in a few penecontemporaneous sites (700-600 ka), both in the north-western and southern parts of Western Europe. These patterns suggest that hominins mastered well-controlled and diversified biface production, combining intense shaping and minimal shaping, and shared a common technological background regardless of the geographical area, and applied this technology regardless of the available raw materials. The degree of skill complexity of hominins in Western Europe between 700 and 600 ka, the current lack of evidence suggesting \"gradual industries\" between core-and-flake series and Acheulean techno-complexes, raise numerous questions on the origin of new behaviours in Western Europe, their mode of diffusion, and their association with Homo heidelbergensis or other Middle Pleistocene populations.

We present here the results of a technological and typological analysis of the Acheulian and early Middle Paleolithic assemblages from Torre in Pietra (Latium, Italy) together with comparisons with the Acheulian small tools of Castel di Guido. The assemblages were never chronometrically dated before. We have now 40Ar/39Ar dates and ESR-U-series dates, within a geomorphological framework, which support correlations to marine isotope stages. The Acheulian (previously correlated to MIS 9) is now dated to MIS 10 while the Middle Paleolithic is dated to MIS 7. Lithic analyses are preceded by taphonomic evaluations. The Levallois method of the Middle Paleolithic assemblage is an innovation characterized by the production of thin flake blanks without cortex. In contrast, the small tool blanks of the Acheulian were either pebbles or thick flakes with some cortex. They provided a relatively easy manual prehension. The choice of Levallois thin flake blanks in the Middle Paleolithic assemblage suggest that the new technology is most likely related to the emergence of hafting. Accordingly, the oldest direct evidence of hafting technology is from the site of Campitello Quarry in Tuscany (Central Italy) where birch-bark tar, found on the proximal part of two flint flakes, is dated to the end of MIS 7. Nevertheless, a peculiar feature of the Middle Paleolithic at Torre in Pietra is the continuous presence of small tool blanks on pebbles and cores and on thick flake albeit at a much lower frequency than in the older Acheulian industries. The adoption of the new technology is thus characterized by innovation combined with a degree of stability. The persistence of these habits in spite of the introduction of an innovative technique underlies the importance of cultural transmission and conformity in the behavior of Neandertals.

We present the study of a composite, yet continuous sedimentary succession covering the time interval spanning 2.6–0.36 Ma in the intramontane basin of Anagni (central Italy) through a dedicated borecore, field surveys, and the review of previous data at the three palaeontological and archaeological sites of Colle Marino, Coste San Giacomo and Fontana Ranuccio. By combining the magneto- and chronostratigraphic data with sedimentologic and biostratigraphic analysis, we describe the palaeogeographic and tectonic evolution of this region during this entire interval. In this time frame, starting from 0.8 Ma, the progressive shallowing and temporary emersion of the large lacustrine basins and alluvial plains created favorable conditions for early hominin occupation of the area, as attested by abundant tool industry occurrences and fossils. This study provides new constraints to better interpret the hominin migratory dynamics and the factors that influenced the location and spatial distribution during the early occupation of this region.

Detailed analyses of mineral composition and whole-rock geochemical data helped to unravel the volcanic plumbing system beneath the rhyolitic Šumovit Greben lava dome, the westernmost member of the Kožuf-Voras volcanic system (N. Macedonia). It is characterized by high SiO2 content (> 70 wt%) coupled with low MgO (< 1 wt%) and Sr (< 500 ppm) suggesting fractionation of clinopyroxene and plagioclase at depth forming a crystal mush and a crystal-poor rhyolitic lens by fractional crystallization and melt extraction on top of it. The crystal mush is composed of mainly clinopyroxene, biotite and plagioclase, whereas sanidine and plagioclase are the most abundant phenocrysts of the rhyolitic lens. The main dome forming event occurred at ca. 2.9 Ma, which sampled the crystal-poor rhyolitic lens. After a short quiescence time, an explosive eruption occurred depositing a massive lapilli tuff layer northwest of the lava dome, and an extrusion of a small-volume lava flow on the northern side of the lava dome at ca. 2.8 Ma. This latter sampled also the crystal mush, as it contains abundant glomeroporphyritic clots of clinopyroxene ± plagioclase ± biotite. The clinopyroxene phenocrysts are chemically homogeneous, their crystallization temperature is ca. 900 °C representing the crystal mush, whereas the plagioclase and the sanidine crystallized at a lower temperature (ca. 790 °C) representing the rhyolitic lens. Noble gas isotopic composition of the clinopyroxene indicate no mantle-derived fluids (< 0.5%) having an R/Ra of ca. 0.04 Ra. The rejuvenation of the system probably occurred due to implementation of mafic magma at depth leading to a heat transfer and partial melting of the cumulate. This led to crystallization of Ba-rich rims of the sanidine and An- and Sr-rich rims of the plagioclase. The crystal mush zone beneath Šumovit Greben might be connected to the nearby, more mafic volcanic centers, and the eruption of Šumovit Greben could have been the start of the last cycle in the lifetime of the Kožuf-Voras volcanic system.

In the Basilicata region, located in southern Italy and known for hosting among the first occurrences of the Acheulean culture in southwestern Europe, the Lower Paleolithic site of Loreto at Venosa is located less than a kilometer from the emblematic site of Notarchirico and less than 25 km from Cimitero di Atella. The Loreto site has not been studied as thoroughly as the two other sites and, although geological investigations have been carried out in the Venosa basin, no direct numerical dating has ever been published for the three archaeological levels brought to light during the excavation campaigns. We present a multi-method geochronological approach combining ESR/U-series, ESR, and 40Ar/39Ar permitting to refine the age of the most ancient archaeological level (A) of the Loreto site. These data allow us to propose an MIS 13 age for this level, in accordance with previous hypotheses based on geological and paleontological data. We also propose a technical review of the lithic tools preserved in the collection of the National Archaeological Museum of Venosa to integrate Loreto in the evolution scheme of the European Acheulean techno-complex emergence and diffusion.

We propose a probabilistic approach to gauge the plausibility of a genetic link between a distal ejecta and a known impact structure, considering the only possible alternative that the distal ejecta could originate from an unknown impact site. We exemplify this approach in the case of three tektite strewn fields related to three known impact structures—the belizites, related to Pantasma (Nicaragua), the ivorites, related to Bosumtwi (Ghana), the moldavites, related to Ries (Germany), as well as on Manson crater ejecta. The computed probability for the unknown meteoritic impact is about 1% or less for these four cases studies.