Explore the vast range of titles available.

Missing persons cases are some of the hardest investigations to solve. The lack of forensic evidence impedes an investigation and critical time can be lost attempting to find the person or body. Recently, researchers have attempted to develop new approaches to help police in these types of investigations. The current paper continues research into Winthropping as a means of assisting police investigations when searching for clandestine, hidden graves and missing persons. A novel approach, using geocachers, to help inform Winthropping processes is outlined, and support gained through a survey of geocachers. The findings are then applied to a series of real-world homicides, including several serial killers. Analyses of gravesite locations in serial killer cases matched many of the features and properties outlined by geocachers. The results also indicate the potential of using Keatley and colleagues’ Winthropping as a psychological profiling as well as geographical profiling technique. Support was provided through the case of a murdered child who was later dumped. Recommendations for further research and application are provided.

The process of disarming, demobilizing and reintegrating ex-soldiers at conflict's end is as old as war itself. The results of these efforts are far from even. Even so, disarmament, demobilization and reintegration (DDR) has assumed a central place in the imagination of the peace, security and development communities. It is frequently advanced as a key pillar of multilateral and bilateral stabilization and reconstruction efforts at war's end. Yet, the contexts in which DDR is conducted are also changing. As the United Nations and others grapple with the new geographies of organized violence, it is hardly surprising that they are also adapting their approaches. Organizations operating in war zones (and also outside of them) are struggling to identify ways of 'disengaging' Al Shabaab in Somalia or northern Kenya, Jihadi fighters in Syria and Iraq, Taliban remnants in Afghanistan and Pakistan, and Boko Haram militia in Nigeria. There are increasingly complex legal and operational challenges for those involved in DDR about when, how and with whom to engage. In order to effectively engage with these dilemmas, this article considers the evolving form and character of DDR programs. In the process, it considers a host of opportunities and obstacles confronting scholars and practitioners in the twenty first century, offering insights on future trajectories.

Syringomyelia is a rare phenomenon that is typically associated with Chiari malformations. However, they can occur in the setting of post-traumatic spinal injury. Potential diversion treatments include syringopleural (SPS), syringoperitoneal and syringosubarachnoid shunts. Short-term complications have been reported in the literature, however, long term complications are not well documented. This case report is of a 43-year-old woman found deceased in bed. She had a history of a traumatic spinal injury following a motor vehicle accident 15 years prior to death. This was complicated by a syringomyelia/syrinx requiring a SPS insertion. Post-mortem imaging and autopsy findings demonstrated a large right tension hydrothorax with dense fibrosis of the pleural surfaces, contralateral diffuse alveolar damage lung changes histologically and a patent SPS. Her cause of death was registered as “Right tension hydrothorax and diffuse alveolar damage complicating right syringopleural shunt and thoracic syrinx”.

Forensic pathologists need to have comprehensive knowledge of a large variety of causes of sudden natural death. We describe a case of sudden and unexpected death in woman in her sixties due to rupture of a large paraesophageal hematoma. The post-mortem examination and differential diagnosis are discussed. The combined findings of whole-body post-mortem CT imaging (PMCT), targeted PMCT angiography, autopsy, and histology are most in keeping with ‘esophageal apoplexy’; a rare cause of hemorrhage in the esophageal wall. A review of the literature indicates that most cases of esophageal apoplexy are self-limiting and that fatal complications are exceedingly rare. Our case demonstrates that esophageal apoplexy can present as sudden unexpected death.

Hanging is a common type of death, and the role of the medical investigation of such deaths by a forensic pathologist not only requires the determination of the cause of death but providing information to assist in the determination of the manner of death. The forensic pathologist should be well versed in the spectrum of injuries known to be associated with neck compression, to document injuries known to be associated with hanging, but also to identify those that are inconsistent with self-inflicted hanging or that may suggest the involvement of a third party in the death. Comprehensive identification and correct interpretation of external and internal injury are crucial for the appropriate degree of police and coroner/medical examiner investigation. We present two cases of deaths believed to be caused by self-inflicted hanging that were observed to have unexpected unilateral dislocation of the temporomandibular joint identified on routine post-mortem computed tomography, without any evidence of involvement of a third party. This injury was unexplained and had not been previously observed at our Forensic Institute nor was it identified after a review of the published biomedical research literature. Issues regarding the cause of this abnormality, possible mechanisms, and the medicolegal significance of this finding will be discussed.

Deaths in those with a history of injecting drug use commonly come to the attention of forensic pathologists, and therefore, one must have knowledge of possible findings and hazards of performing autopsies in these cases. This case demonstrates the finding of extensive retained broken needles in the subcutis of the arms and femoral region in a man with a long history of injecting drug use. While few or single broken needles are not uncommonly encountered, the multiplicity of needles in this case is noteworthy. We have demonstrated the findings both radiologically with PMCT and by conventional autopsy.

Climate change will have a considerable impact upon the processes that moderate weed invasion, in particular to that of parthenium weed ( Parthenium hysterophorus L.). This study evaluated the performance of two Australian biotypes of parthenium weed under a range of environmental conditions including soil moisture (100 and 50% of field capacity), atmospheric carbon dioxide (CO 2 ) concentration (390 and 550 ppm), and temperature (35/20 and 30/15 °C/day/night). Measurements were taken upon growth, reproductive output, seed biology (fill, viability and dormancy) and soil seed longevity. Parthenium weed growth and seed output were significantly increased under the elevated CO 2 concentration (550 ppm) and in the cooler (30/15 °C) and wetter (field capacity) conditions. However, elevated CO 2 concentration could not promote growth or seed output when the plants were grown under the warmer (35/20 °C) and wetter conditions. Warm temperatures accelerated the growth of parthenium weed, producing plants with greater height biomass but with a shorter life span. Warm temperatures also affected the reproductive output by promoting both seed production and fill, and promoting seed longevity. Dryer soil conditions (50% of field capacity) also promoted the reproductive output, but did not retain high seed fill or promote seed longevity. Therefore, the rising temperatures, the increased atmospheric CO 2 concentration and the longer periods of drought predicted under climate change scenarios are likely to substantially enhance the growth and reproductive output of these two Australian parthenium weed biotypes. This may facilitate the further invasion of this noxious weed in tropical and sub-tropical natural and agro-ecosystems.

Parthenium weed is a highly invasive alien species in more than 40 countries around the world. Along with severe negative effects on human and animal health and crop production, it also causes harm to ecosystem functioning by reducing the native plant species biodiversity. However, its impacts on native plant species, especially in pasture communities, are less known. Given parthenium weed causes substantial losses to Australian pastures’ productivity, it is crucial to estimate its impact on pasture communities. This study evaluates the impact of parthenium weed upon species diversity in a pasture community at Kilcoy, south east Queensland, Australia. Sub-sites containing three levels of parthenium weed density (i.e. high, low and zero) were chosen to quantify the above- and below-ground plant community structure. Species richness, diversity and evenness were all found to be significantly reduced as the density of parthenium weed increased; an effect was evident even when parthenium weed was present at relatively low densities (i.e. two plants m −2 ). This trend was observed in the summer season as well as in winter season when this annual weed was absent from the above-ground plant community. This demonstrates the strong impact that parthenium weed has upon the community composition and functioning throughout the year. It also shows the long-term impact of parthenium weed on the soil seed bank where it had displaced several native species. So, management options used for parthenium weed should also consider the reduction of parthenium weed seed bank along with controlling its above-ground populations.

The majority of geographical profiling research focuses on the relationship between offender and location, which works particularly well when a burial site is known. In real-world investigations, however, burial or dump sites are often not known. The aim of the current paper is to outline a relatively under-used method of geographic profiling: Winthropping. While the method has been around for several decades, few studies have provided any research findings using it. There are two likely reasons for Winthropping being under-used: first, it has not been clearly, theoretically explained; second, given its relative novelty, it may not be immediately clear how to use it in research and real-world scenarios. The current paper outlines several key psychological (e.g., satisficing and affordances) and criminological (e.g., rational choice theory and crime geometry) theories that may explain why Winthropping works. Case studies are provided, and a methodological approach (matrix forecasting) is then provided to show how it could work in research practice and real-world applications. Overall, Winthropping is deemed to be highly useful, and it is hoped that experts in the field will begin developing this tool for wider, applied use.

Droplet characteristics are identified as essential factors in agricultural spray application. The aims of this study were to analyse the influence of spray parameters on droplet characteristics and to determine possible candidate sprays that would produce the same droplet size categorizations as the American Society of Agricultural and Biological Engineers (ASABE) standard S-572.1 for air induction nozzles (AINs). Six different orifice sizes of the Billericay Farm Services (BFS) air induction (AI) flat fan hydraulic nozzles (the air bubblejet) were examined at different spray pressures (200 kPa, 300 kPa, 400 kPa, 500 kPa, 600 kPa and 700 kPa) and concurrent air velocities (2 m/s, 3 m/s, 4 m/s and 5 m/s). The influences of spray parameters on the droplet characteristics were analysed using analysis of covariance (ANCOVA) and analysis of variance (ANOVA). Results showed that: (1) The values of droplet characteristics and the results of ANOVA were significantly different before and after eliminate the influence of dynamic surface tension (DST) on droplet characteristics by ANCOVA; (2) (a) the reduction rates of the droplet diameter sizes decreased with increasing spray pressure; (b) air velocities of 2 m/s and 5 m/s resulted in smaller droplets reports, and air velocities of 3 m/s and 4 m/s are more suitable for agricultural spray applications; (c) a larger nozzle orifice size not always result in a larger droplet size and (3) Fine, Medium, Coarse, Very Coarse and Extremely Coarse droplet classification categories as the ASABE S-572.1 standard categorizations were determined to classify AINs.