Explore the vast range of titles available.

Nuclear reactors are a source of electron antineutrinos due to the presence of unstable fission products that undergo β - decay. They will be exploited by the JUNO experiment to determine the neutrino mass ordering and to get very precise measurements of the neutrino oscillation parameters. This requires the reactor antineutrino spectrum to be characterized as precisely as possible both through high-resolution measurements, as foreseen by the TAO experiment, and detailed simulation models. In this paper, we present a benchmark analysis utilizing Serpent Monte Carlo simulations in comparison with real pressurized water reactor spent fuel data. Our objective is to study the accuracy of fission fraction predictions as a function of different reactor simulation approximations. Then, using the BetaShape software, we construct reactor antineutrino spectrum using the summation method, thereby assessing the influence of simulation uncertainties on it.

Accelerated muon beams have been considered for the next-generation studies of high-energy lepton–antilepton collisions and neutrino oscillations. However, high-brightness muon beams have not yet been produced. The main challenge for muon acceleration and storage stems from the large phase-space volume occupied by the beam, derived from the production mechanism of muons through the decay of pions. The phase-space volume of the muon beam can be decreased through ionization cooling. Here we show that ionization cooling leads to a reduction in the transverse emittance of muon beams that traverse lithium hydride or liquid hydrogen absorbers in the Muon Ionization Cooling Experiment. Our results represent a substantial advance towards the realization of muon-based facilities that could operate at the energy and intensity frontiers. Current muon beams have a phase-space volume that is too large for applications in muon colliders. Now, the reduction in the beam’s transverse emittance when passed through different absorbers in ionization cooling experiments is quantified.

Measurements of the double-differential π ± production cross-section in the range of momentum 100 MeV/c≤p< 800 MeV/c and angle 0.35 rad ≤θ<  2.15 rad in proton–beryllium, proton–aluminium and proton–lead collisions are presented. The data were taken with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 GeV/c to 12.9 GeV/c hitting a target with a thickness of 5% of a nuclear interaction length. The tracking and identification of the produced particles was performed using a small-radius cylindrical time projection chamber (TPC) placed inside a solenoidal magnet. Incident particles were identified by an elaborate system of beam detectors. Results are obtained for the double-differential cross-sections d 2 σ/dpdθ at six incident proton beam momenta (3 GeV/c, 5 GeV/c, 8 GeV/c, 8.9 GeV/c (Be only), 12 GeV/c and 12.9 GeV/c (Al only)) and compared to previously available data.

The precision chambers of the ATLAS Muon Spectrometer are built with Monitored Drift Tubes (MDT). The requirement of high accuracy and low systematic error, to achieve a transverse momentum resolution of 10% at 1 TeV, can only be accomplished if the calibrations are known with an accuracy of 20 μm. The relation between the drift path and the measured time (the socalled r-t relation) depends on many parameters (temperature T, hit rate, gas composition, thresholds,...) subject to time variations. The r-t relation has to be measured from the data without the use of an external detector, using the autocalibration technique. This method relies on an iterative procedure applied to the same data sample, starting from a preliminary set of constants. The required precision can be achieved using a large (few thousand) number of non-parallel tracks crossing a region, called calibration region, i.e. the region of the MDT chamber sharing the same r-t relation.

A novel single-particle technique to measure emittance has been developed and used to characterise seventeen different muon beams for the Muon Ionisation Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to 281 MeV/ c , have emittances of approximately 1.2–2.3  π  mm-rad horizontally and 0.6–1.0  π  mm-rad vertically, a horizontal dispersion of 90–190 mm and momentum spreads of about 25 MeV/ c . There is reasonable agreement between the measured parameters of the beams and the results of simulations. The beams are found to meet the requirements of MICE.

Measurements of the double-differential π± production cross-section in the range of momentum 100 MeV/c≤p< 800 MeV/c and angle 0.35 rad ≤θ< 2.15 rad in proton-beryllium, proton-aluminium and proton-lead collisions are presented. The data were taken with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 GeV/c to 12.9 GeV/c hitting a target with a thickness of 5% of a nuclear interaction length. The tracking and identification of the produced particles was performed using a small-radius cylindrical time projection chamber (TPC) placed inside a solenoidal magnet. Incident particles were identified by an elaborate system of beam detectors. Results are obtained for the double-differential cross-sections d2σ/dpdθ at six incident proton beam momenta (3 GeV/c, 5 GeV/c, 8 GeV/c, 8.9 GeV/c (Be only), 12 GeV/c and 12.9 GeV/c (Al only)) and compared to previously available data.

The double-differential production cross-section of positive pions, , measured in the HARP experiment is presented. The incident particles are 8.9 GeV/c protons directed onto a beryllium target with a thickness of 5% of a nuclear interaction length. The measured cross-section has a direct impact on the prediction of neutrino fluxes for the MiniBooNE and SciBooNE experiments at Fermilab. After cuts, 13 million protons on target produced about 96000 reconstructed secondary tracks which were used in this analysis. Cross-section results are presented in the kinematic range 0.75 GeV/c≤pπ≤ 6.5 GeV/c and 30 mrad≤θπ≤ 210 mrad in the laboratory frame.

A novel single-particle technique to measure emittance has been developed and used to characterise seventeen different muon beams for the Muon Ionisation Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to 281 MeV/c, have emittances of approximately 1.2-2.3 π mm-rad horizontally and 0.6-1.0 π mm-rad vertically, a horizontal dispersion of 90-190 mm and momentum spreads of about 25 MeV/c. There is reasonable agreement between the measured parameters of the beams and the results of simulations. The beams are found to meet the requirements of MICE.

A measurement of the double-differential cross-section for the production of charged pions in proton–tantalum collisions emitted at large angles from the incoming beam direction is presented. The data were taken in 2002 with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 GeV/c to 12 GeV/c hitting a tantalum target with a thickness of 5% of a nuclear interaction length. The angular and momentum range covered by the experiment (100 MeV/c ≤p< 800 MeV/c and 0.35 rad ≤θ< 2.15 rad) is of particular importance for the design of a neutrino factory. The produced particles were detected using a small-radius cylindrical time projection chamber (TPC) placed in a solenoidal magnet. Track recognition, momentum determination and particle identification were all performed based on the measurements made with the TPC. An elaborate system of detectors in the beam line ensured the identification of the incident particles. Results are shown for the double-differential cross-sections d2σ/dpdθ at four incident proton beam momenta (3 GeV/c, 5 GeV/c, 8 GeV/c and 12 GeV/c). In addition, the pion yields within the acceptance of typical neutrino factory designs are shown as a function of beam momentum. The measurement of these yields within a single experiment eliminates most systematic errors in the comparison between rates at different beam momenta and between positive and negative pion production.

A measurement of the double-differential π ± production cross-section in proton–carbon, proton–copper and proton–tin collisions in the range of pion momentum 100 MeV/ c ≤p<800 MeV/ c and angle 0.35 rad≤θ<2.15 rad is presented. The data were taken with the HARP detector in the T9 beam line of the CERN PS. The pions were produced by proton beams in a momentum range from 3 GeV/ c to 12 GeV/ c hitting a target with a thickness of 5% of a nuclear interaction length. The tracking and identification of the produced particles was done using a small-radius cylindrical time projection chamber (TPC) placed in a solenoidal magnet. An elaborate system of detectors in the beam line ensured the identification of the incident particles. Results are shown for the double-differential cross-sections d 2 σ/dpdθ at four incident proton beam momenta (3 GeV/ c , 5 GeV/ c , 8 GeV/ c and 12 GeV/ c ).