Explore the vast range of titles available.

Effective bone tissue regeneration remains pivotal in implant dentistry, particularly for edentulous patients with compromised alveolar bone due to atrophy and sinus pneumatization. Biomaterials are essential for promoting regenerative processes by supporting cellular recruitment, vascularization, and osteogenesis. This study presents the development and characterization of a novel lithography-printed ceramic β-TCP scaffold, with a macro/micro-porous lattice, engineered to optimize osteoconduction and mechanical stability. Morphological, structural, and biomechanical assessments confirmed a reproducible microarchitecture with suitable porosity and load-bearing capacity. The scaffold was also employed for maxillary sinus augmentation, with postoperative evaluation using micro computed tomography, synchrotron imaging, histology, and Fourier Transform Infrared Imaging analysis, demonstrating active bone regeneration, scaffold resorption, and formation of mineralized tissue. Advanced imaging supported by deep learning tools revealed a well-organized osteocyte network and high-quality bone, underscoring the scaffold’s biocompatibility and osteoconductive efficacy. These findings support the application of these 3D-printed β-TCP scaffolds in regenerative dental medicine, facilitating tissue regeneration in complex jawbone deficiencies.

The recent advancements in digital technologies have led to exponential progress in dentistry. This narrative review aims to summarize the applications of Augmented Reality, Virtual Reality and Mixed Reality in dentistry and describes future challenges in digitalization, such as Artificial Intelligence and Robotics. Augmented Reality, Virtual Reality and Mixed Reality represent effective tools in the educational technology, as they can enhance students’ learning and clinical training. Augmented Reality and Virtual Reality and can also be useful aids during clinical practice. Augmented Reality can be used to add digital data to real life clinical data. Clinicians can apply Virtual Reality for a digital wax-up that provides a pre-visualization of the final post treatment result. In addition, both these technologies may also be employed to eradicate dental phobia in patients and further enhance patient’s education. Similarly, they can be used to enhance communication between the dentist, patient, and technician. Artificial Intelligence and Robotics can also improve clinical practice. Artificial Intelligence is currently developed to improve dental diagnosis and provide more precise prognoses of dental diseases, whereas Robotics may be used to assist in daily practice.

Clear and removable tooth aligners for orthodontics treatments have become an increasingly popular alternative to fixed appliances. Even if protocols suggest removing aligners before eating or drinking, most patients retain them when they drink beverages. Alterations in the material during the daily use could determine a reduction in the application forces, affecting the desired orthodontic movement; the knowledge of how this material reacts when subjected to different aging processes is mandatory to establish the predictability of the orthodontic treatment. According to this, the aim of the present study was to assess a new objective approach, coupling spectroscopic and chemometric tools, to evaluate the changes occurring in Invisalign® aligners, the most widely used brand, exposed in vitro to coffee, tea, Coca Cola® and UV radiation for 24 and 48 h. In particular, ATR-FTIR spectroscopy was utilized to characterize, at the molecular level, the chemical and color modifications in the surfaces of the appliances; the obtained data were submitted to PCA and one-way ANOVA and Tukey’s multiple comparison test. Moreover, a colorimetry analysis was carried out to evaluate any changes in color and transparency. Coffee and tea samples displayed the major color changes between the tested groups. The differences highlighted in the spectral features of coffee, tea and UV-treated samples were mainly ascribable to color and transparency changes, because the chemical properties remained unaltered.

Background One of the main factors for the osseointegration of dental implants is the development of an adequate soft tissue barrier, mainly composed by collagen, which protects the implant from bacterial development. The structural features of the peri-implant collagen are influenced by the implant components and, in particular, by the type of the surface. In the clinical practice, healing abutments are characterized by smooth surfaces, named machined. Recently, a new laser technique, Synthegra, has been developed to obtain a topography-controlled surface with micrometric regular pores that seems reducing the risk of peri-implantitis. Based on this background, this study aims investigating the structural organization and spatial distribution of collagen surrounding healing abutments characterized by laser-treated and machined surfaces. Methods Gingiva portions surrounding custom-made healing abutments (HA), characterized by alternated laser-treated and machined surfaces, were collected and analyzed by combining Fourier Transform InfraRed Imaging (FTIRI) spectroscopy, a non-invasive and high-resolution bidimensional analytical technique, with histological and multivariate analyses. Results Masson’s trichrome staining, specific for collagen, highlighted a massive presence of collagen in all the analyzed samples, evidencing a surface-related spatial distribution. The nature of collagen, investigated by the FTIRI spectroscopy, appeared more abundant close to the laser-treated surface, with a perpendicular disposition of the bundles respect to the HA; conversely, a parallel distribution was observed around the machined surface. A different secondary structure was also found, with a higher amount of triple helices and a lower quantity of random coils in collagen close to the laser treated surfaces. Conclusions FTIRI spectroscopy demonstrates that the use of a laser treated transmucosal surface can improve the morphological organization of the peri-implant collagen, which presents a distribution more similar to that of natural teeth. Trial registration : This trial is registered with ClinicalTrials.gov Identifier: (Registration Number: NCT05754970). Registered 06/03/2023, retrospectively registered, https://clinicaltrials.gov/show/NCT05754970 .

Diet plays an important role in the etiopathology of dental caries. Milk and dairy products (DPs), especially in children and adolescents, are important sources of protein, calcium and phosphorus and could have an effect on dental and oral health. The aim of this scoping review was to analyze the scientific literature on the non-cariogenic effect of milk and DPs, with a focus on their potential to prevent dental caries in children and adolescents. PubMed, EMBASE, and Web of Science were searched for publications relevant to our topic from January 2013 to 30 September 2023. Thirty-eight studies were included in the qualitative analysis. The included studies highlight the properties of milk and DPs that contribute to enamel remineralization, exhibit antibacterial action, inhibit the growth of cariogenic bacteria, and promote a balanced oral microbiome. With regard to the addition of probiotics (PBs) and fluoride (F) to DPs, the mixed results of the studies analyzed did not allow a clear statement to be made about their non-cariogenic effects. However, several studies show that the addition of PBs can reduce cariogenic bacteria, create a protective barrier against pathogens and support the host’s natural defense mechanisms. Further long-term and high-quality studies are needed to understand the impact of milk and its constituents on oral health in order to promote effective caries prevention strategies in children and adolescents.

Objective: This in vitro study quantitatively compared the time-dependent remineralization potential of three professional agents on artificially induced enamel lesions using Scanning Electron Microscopy (SEM) and energy-dispersive X-ray analysis (EDX). Methods: Sixty extracted sound molars were randomly assigned to three groups (number = 20): G_CPP-ACP, treated with casein phosphopeptide–amorphous calcium phosphate; G_Zn-HA, treated with zinc-hydroxyapatite; and G_F-ACP, treated with fluoridated amorphous calcium phosphate. The crown of each tooth was divided into three areas: one represented the control (CTRL, sound enamel), one underwent demineralization (DEMIN, demineralized enamel), and the third one was at first demineralized and then treated with a remineralizing agent, allowing intra-sample comparison. Artificial lesions were produced by immersion in 0.1 M lactic acid (72 h). Groups were subdivided according to remineralization time (7, 14, 21, and 28 days). Samples underwent daily treatment under a pH-cycling regimen. Surface morphology and Ca/P ratios were evaluated by SEM-EDX, and data were statistically analyzed (p < 0.05). Results: All agents promoted a progressive increase in Ca/P ratio over time, confirming a time-dependent remineralization effect. At day 7, G_Zn-HA showed higher Ca/P values, but from day 14 onward, G_F-ACP produced significantly greater mineral gain than the other groups (p < 0.05). By day 21, G_F-ACP reached Ca/P values approaching CTRL, while G_CPP-ACP and G_Zn-HA remained at lower levels, reaching a plateau respectively at 21 and 14 days. SEM observations supported these findings: G_CPP-ACP and G_Zn-HA showed partial surface recovery, whereas G_F-ACP exhibited a compact, homogeneous enamel-like structure at 28 days. Conclusions: All tested agents demonstrated time-dependent remineralization, enhanced with prolonged exposure, suggesting that the time of application represents a key factor for clinical success.

Currently, various analytical techniques, including scanning electron microscopy, X-Ray diffraction, microcomputed tomography, and energy dispersive X-ray spectroscopy, are available to study the structural or elemental features of hard dental tissues. In contrast to these approaches, Raman Microspectroscopy (RMS) has the great advantage of simultaneously providing, at the same time and on the same sample, a morpho-chemical correlation between the microscopic information from the visual analysis of the sample and its chemical and macromolecular composition. Hence, RMS represents an innovative and non-invasive technique to study both inorganic and organic teeth components in vitro. The aim of this narrative review is to shed new light on the applicative potential of Raman Microspectroscopy in the dental field. Specific Raman markers representative of sound and pathological hard dental tissues will be discussed, and the future diagnostic application of this technique will be outlined. The objective and detailed information provided by this technique in terms of the structure and chemical/macromolecular components of sound and pathological hard dental tissues could be useful for improving knowledge of several dental pathologies. Scientific articles regarding RMS studies of human hard dental tissues were retrieved from the principal databases by following specific inclusion and exclusion criteria.

This study aimed to evaluate the loss of mineral content in the enamel surface in early artificial lesions and to assess the remineralizing potential of different agents by means of SEM coupled with energy-dispersive X-ray analysis (EDX). The analysis was performed on the enamel of 36 molars divided into six equal groups, in which the experimental ones (3–6) were treated using remineralizing agents for a 28-day pH cycling protocol as follows: Group 1, sound enamel; Group 2, artificially demineralized enamel; Group 3, CPP-ACP treatment; Group 4, Zn-hydroxyapatite treatment; Group 5, NaF 5% treatment; and Group 6, F-ACP treatment. Surface morphologies and alterations in Ca/P ratio were evaluated using SEM-EDX and data underwent statistical analysis (p < 0.05). Compared with the sound enamel of Group 1, the SEM images of Group 2 clearly showed loss of integrity, minerals, and interprismatic substances. Groups 3–6 showed a structural reorganization of enamel prisms, interestingly comprising almost the entire enamel surface. Group 2 revealed highly significant differences of Ca/P ratios compared with other groups, while Groups 3–6 showed no differences with Group 1. In conclusion, all tested materials demonstrated a biomimetic ability in remineralizing lesions after 28 days of treatment.

In the present study, the cytotoxic effects of 5-azacytidine on primary Oral Squamous Cell Carcinoma cells (OSCCs) from human biopsies, and on Cancer Stem Cells (CSCs) from the same samples, were investigated by an in vitro Fourier Transform InfraRed Microscospectroscopy (FTIRM) approach coupled with multivariate analysis. OSCC is an aggressive tumoral lesion of the epithelium, accounting for ~90% of all oral cancers. It is usually diagnosed in advanced stages, and this causes a poor prognosis with low success rates of surgical, as well as radiation and chemotherapy treatments. OSCC is frequently characterised by recurrence after chemotherapy and by the development of a refractoriness to some employed drugs, which is probably ascribable to the presence of CSCs niches, responsible for cancer growth, chemoresistance and metastasis. The spectral information from FTIRM was correlated with the outcomes of cytotoxicity tests and image-based cytometry, and specific spectral signatures attributable to 5-azacytidine treatment were identified, allowing us to hypothesise the demethylation of DNA and, hence, an increase in the transcriptional activity, together with a conformational transition of DNA, and a triggering of cell death by an apoptosis mechanism. Moreover, a different mechanism of action between OSSC and CSC cells was highlighted, probably due to possible differences between OSCCs and CSCs response.

One of the current major challenges in implant therapy is to minimize marginal bone loss around implants, since it can trigger bacterial colonization of the implant’s neck, leading to its failure. The present study aimed (1) to scientifically validate a new mathematical rule based on soft tissues thickness, for choosing the correct implant position with respect to the bone level, in order to provide a better tissue adaptation to the abutment/implant surface to avoid bacterial invasion, and (2) to apply this mathematical rule to the Biological Oriented Immediate Loading (B.O.I.L.) surgical protocol, avoiding peri-implant bone resorption. N. 127 implants were inserted following B.O.I.L. protocol: implants were placed according to the mathematical rule Y = X − 3, which correlates the position of the implant from the bone crest level (Y) with the thickness of the soft tissues (X). All the implants were inserted in fresh extraction sockets, and immediately loaded with temporary abutments and prostheses. Bone levels were evaluated through radiographic examination just after surgical procedure (T0), and after 10 days (10D), 6 months (6M), 1 year (1Y), and 5 years (5Y). After 5 years, the implant survival rate was 100%, with a medium marginal bone loss around implants of 0.0704 mm (SD = 0.169 mm). One-way ANOVA, followed by Tukey’s multiple comparison test was performed for statistical evaluations (p < 0.05). This protocol provided a safe and successful procedure, with a good soft tissue seal against bacterial challenge. The application of the mathematical rule allows the implant placement in a correct vertical position from the bone crest, avoiding bone resorption and bacterial infiltrations. Moreover, the use of Multi Unit Abutment (MUA) determined a stable biological seal, favouring the implant healing and preserving the adhesion of hemidesmosomes to the titanium of MUA.