Explore the vast range of titles available.

Chemical pesticides have been providing the crop protection required to help satisfy the world demand for food, feed, and fiber. Biopesticides (BPs), particularly fungi-based BPs, are a promising new alternative with high biodegradability and specificity, low likelihood of resistance development, suitability for incorporation into integrated pest management practices, and practically no known health risks. However, unsuitable mass production procedures, narrow action spectra, heterogeneous performance, and short shelf life combined with legislation registry constraints, end-user resistance, and general lack of knowledge are slowing their adoption. In addition to regulatory framework revisions and improved training initiatives, thoughtfully designed formulations, improved preservation methodologies, and field test validations are needed to offer new BPs with improved efficacy and increased shelf life. This overview compiles current and novel fungi-based BP applications for crop and animal pest control with a focus on formulation approaches aiming at retaining efficacy and improving shelf life. Innovative formulation approaches, emerging pest control technologies, and BP challenges and opportunities are also included. Graphical abstract

The COVID-19 pandemic has challenged healthcare systems worldwide. Efforts in low-to-middle-income countries (LMICs) cannot keep stride with infection rates, especially during peaks. A strong international collaboration between Arizona State University (ASU), Tec de Monterrey (TEC), and Servicios de Agua y Drenaje de Monterrey (Local Water Utilities) is acting to integrate wastewater-based epidemiology (WBE) of SARS-CoV-2 in the region as a complementary approach to aid the healthcare system. Wastewater was collected from four sewer catchments in the Monterrey Metropolitan area in Mexico (pop. 4,643,232) from mid-April 2020 to February 2021 (44 weeks, n = 644). Raw wastewater was filtered and filter-concentrated, the RNA was extracted using columns, and the Charité/Berlin protocol was used for the RT-qPCR. The viral loads obtained between the first (June 2020) and second waves (February 2021) of the pandemic were similar; in contrast, the clinical cases were fewer during the first wave, indicating poor coverage. During the second wave of the pandemic, the SARS-CoV-2 quantification in wastewater increased 14 days earlier than the COVID-19 clinical cases reported. This is the first long-term WBE study in Mexico and demonstrates its value in pandemic management.

Background Due to unrestricted entry of wastewater into the environment and the transportation of microbial contaminants to humans and organisms, environmental protection requires the use of appropriate purification systems with high removal efficiency for microbial agents are needed. The purpose of this study was to determine the efficacy of current wastewater treatment systems in removing microbes and their contaminants. Methods A systematic review was conducted for all articles published in 5 Iranian environmental health journals in 11 years. The data were collected according to the inclusion and exclusion criteria and by searching the relevant keywords in the articles published during the years (2008–2018), with emphasis on the efficacy of wastewater treatment systems in removing microbial agents. Qualitative data were collected using a preferred reporting items for systematic reviews and meta-analyzes (PRISMA) standard checklist. After confirming the quality of the articles, information such as the name of the first author and the year of publication of the research, the type of study, the number of samples, the type of purification, the type of microbial agents and the rate of removal of microbial agents were entered into the checklist. Also the removal rates of the microbial agents mentioned in the studies were compared with united states environmental protection agency (US-EPA) standards. Results In this study, 1468 articles retrieved from 118 issues of 5 environmental health journals were reviewed. After reviewing the quality of the articles in accordance with the research objectives, 14 articles were included in the study that were published between 2010 and 2018. In most studies, two main indicators Total coliforms and Fecal coliforms in wastewater were investigated. Removing fungi and viral contamination from wastewater was not found in any of the 14 studies. Different systems (activated sludge, stabilization ponds, wetlands, and low and medium pressure UV disinfection systems were used to remove microbial agents in these studies. Most articles used active sludge systems to remove Total coliforms and Fecal coliforms , which in some cases were not within the US-EPA standard. The removal of Cysts and Parasitic eggs was only reporte from stabilization pond systems (SPS) where removal efficiency was found in accordance with US-EPA standards. Conclusions Different types of activated sludge systems have higher efficacy to remove microbial agents and are more effective than other mentioned systems in removing the main indicators of sewage contamination including Total coliforms and Fecal coliforms . However, inappropriate operation, maintenance and inadequate handling of activated sludge can also reduce its efficiency and reduce the removal of microbial agents, which was reported in some studies. Therefore, it is recommended to conduct research on how to improve the operation, maintenance, and proper management of activated sludge systems to transfer knowledge to users of sludge systems and prevent further health issues related to microbial agents.

This review highlights the underexplored potential and promises of marine bioactive peptides (MBPs) with unique structural, physicochemical, and biological activities to fight against the current and future human pathologies. A particular focus is given to the marine environment as a significant source to obtain or extract high-value MBPs from touched/untouched sources. For instance, marine microorganisms, including microalgae, bacteria, fungi, and marine polysaccharides, are considered prolific sources of amino acids at large, and peptides/polypeptides in particular, with fundamental structural sequence and functional entities of a carboxyl group, amine, hydrogen, and a variety of R groups. Thus, MBPs with tunable features, both structural and functional entities, along with bioactive traits of clinical and therapeutic value, are of ultimate interest to reinforce biomedical settings in the 21st century. On the other front, as the largest biome globally, the marine biome is the so-called “epitome of untouched or underexploited natural resources” and a considerable source with significant potentialities. Therefore, considering their biological and biomedical importance, researchers around the globe are redirecting and/or regaining their interests in valorizing the marine biome-based MBPs. This review focuses on the widespread bioactivities of MBPs, FDA-approved MBPs in the market, sustainable development goals (SDGs), and legislation to valorize marine biome to underlying the impact role of bioactive elements with the related pathways. Finally, a detailed overview of current challenges, conclusions, and future perspectives is also given to satisfy the stimulating demands of the pharmaceutical sector of the modern world.

Due to the constant growth of the human population and anthropological activity, it has become necessary to use sustainable and affordable technologies that satisfy the current and future demand for agricultural products. Since the nutrients available to plants in the soil are limited and the need to increase the yields of the crops is desirable, the use of chemical (inorganic or NPK) fertilizers has been widespread over the last decades, causing a nutrient shortage due to their misuse and exploitation, and because of the uncontrolled use of these products, there has been a latent environmental and health problem globally. For this reason, green biotechnology based on the use of microalgae biomass is proposed as a sustainable alternative for development and use as soil improvers for crop cultivation and phytoremediation. This review explores the long-term risks of using chemical fertilizers for both human health (cancer and hypoxia) and the environment (eutrophication and erosion), as well as the potential of microalgae biomass to substitute current fertilizer using different treatments on the biomass and their application methods for the implementation on the soil; additionally, the biomass can be a source of carbon mitigation and wastewater treatment in agro-industrial processes.

Summary The marked trend and consumers growing interest in natural and healthy products have forced researches and industry to develop novel products with functional ingredients. Microalgae have been recognized as source of functional ingredients with positive health effects since these microorganisms produce polyunsaturated fatty acids, polysaccharides, natural pigments, essential minerals, vitamins, enzymes and bioactive peptides. For this reason, the manuscript reviews two of the main high‐value metabolites which can be obtained from microalgae: pigments and essential lipids. Therefore, the extraction and purification methods for polyunsaturated fatty acids, astaxanthin, phycoerythrin and phycocyanin are described. Also, the effect that environmental growth conditions have in the production of these metabolites is described. This review summarizes the existing methods to extract and purify such metabolites in order to develop a feasible and sustainable algae industry. This article based on literature framework describes lipids and pigments as two representative classes of high value compounds synthesized by algae.In the case of lipids, metabolic production, extraction and quantification methods are discussed. For pigments, the extraction and purification methods for astaxanthin, phycocyanin and phycoerytrin are described.

Microalgae are photosynthetic organisms known for producing valuable metabolites under different conditions such as extreme temperatures, high salinity, osmotic pressure, and ultraviolet radiation. In recent years, these metabolites have become a trend due to their versatility in applications such as pharmaceuticals, cosmetics, and others. They have even been proposed as an alternative source of bioactive metabolites to avoid the harmful effects on the environment produced by active compounds such as oxybenzone in commercials sunscreens. One of the most studied applications is the use of microalgae for skin care and topical use as cosmeceuticals. With the increasing demand for more environmentally friendly products in cosmetics, microalgae have been further explored in relation to this application. It has been shown that some microalgae are resistant to UV rays due to certain compounds such as mycosporine-like amino acids, sporopollenin, scytonemin, and others. These compounds have different mechanisms of action to mitigate UV damage induced. Still, they all have been proven to confer UV tolerance to microalgae with an absorbance spectrum like the one in conventional sunscreens. This review focuses on the use of these microalgae compounds obtained by UV stimulation and takes advantage of their natural UV-resistant characteristics to potentially apply them as an alternative for UV protection products.

Carbon dots (CDs) have attracted significant research attention worldwide due to their unique properties and advantageous attributes, such as superior optical properties, biocompatibility, easy surface functionalization, and more. Moreover, biomass-derived CDs have attracted much attention because of their additional advantages related to more environmentally friendly and lower-cost synthesis. In this respect, chitosan has been recently explored for the preparation of CDs, which in comparison to other natural precursors exhibited additional advantages. Beyond the benefits related to the eco-friendly and abundant nature of chitosan, using it as a nanomaterial precursor offers additional benefits in terms of structure, morphology, and dopant elements. Furthermore, the high content of nitrogen in chitosan allows it to be used as a single carbon and nitrogen precursor for the preparation of N-doped CDs, significantly improving their fluorescent properties and, therefore, their performances. This review addresses the most recent advances in chitosan-based CDs with a special focus on synthesis methods, enhanced properties, and their applications in different fields, including biomedicine, the environment, and food packaging. Finally, this work also addresses the key challenges to be overcome to propose future perspectives and research to unlock their great potential for practical applications.

Environmental Impact Assessment is the process of evaluating the effects caused by a project on the environment. The outcomes generated by this assessment can lead to a reduction of the negative effects and an increase in the positive effects caused by mine projects. The present study was conducted to evaluate the environmental impact assessment of the Goliran Coal Mine in northern Iran. In the descriptive-analytical study, to achieve the objectives, observatory surveys were conducted around the coal mine using a checklist, which was about the positive and negative effects of a coal mine. Then the data were entered into the RIAM and the positive and negative effects were ranked and the most important effects were determined. In RIAM, one point is assigned to each component. 17 important activities for environmental impacts were identified using a checklist. Among the activities carried out at the coal mine site, the major ones included tunnel excavation, construction of the rail line collection and disposal of coal mine effluent, coal transportation, collection and disposal of mine tailings, and technical defects and leakage. The scores of each environmental factor were based on the four environmental components: physical/chemical, biological/ecological, social/cultural, and economic/operational. The results of the present study showed that the most negatively affected environmental components are the physical/chemical components derived from three activities; the construction of the underground tunnel; the construction of a coal transport rail line; and the actual transportation of coal extracts. The scores of each environmental factor based on the four components at the Goliran coal mine in northern Iran indicate that the highest negative score was -64, corresponding to the physical/chemical component, and was assigned to air pollution. On the other hand, the highest positive score corresponds to the economic/operational component with +54, assigned to the income that employees earn from the mine. Overall results showed that the coal mine in northern Iran had negative effects on the environment but the effects were not severe. It is suggested that for future research, corrective measures should be taken in the form of an environmental management plan to reduce the negative effects caused by coal mining, and then prospective research should be done to check the extent of reducing the negative effects.

The use of sensors in critical areas for human development such as water, food, and health has increased in recent decades. When the sensor uses biological recognition, it is known as a biosensor. Nowadays, the development of biosensors has been increased due to the need for reliable, fast, and sensitive techniques for the detection of multiple analytes. In recent years, with the advancement in nanotechnology within biocatalysis, enzyme-based biosensors have been emerging as reliable, sensitive, and selectively tools. A wide variety of enzyme biosensors has been developed by detecting multiple analytes. In this way, together with technological advances in areas such as biotechnology and materials sciences, different modalities of biosensors have been developed, such as bi-enzymatic biosensors and nanozyme biosensors. Furthermore, the use of more than one enzyme within the same detection system leads to bi-enzymatic biosensors or multi-enzyme sensors. The development and synthesis of new materials with enzyme-like properties have been growing, giving rise to nanozymes, considered a promising tool in the biosensor field due to their multiple advantages. In this review, general views and a comparison describing the advantages and disadvantages of each enzyme-based biosensor modality, their possible trends and the principal reported applications will be presented.