Explore the vast range of titles available.

Additive manufacturing (AM) has brought significant breakthroughs to the construction sector, such as the ability to fabricate complex geometries, enhance efficiency, and reduce both material usage and construction waste. However, several challenges must still be addressed to fully transition from conventional construction practices to innovative and sustainable green alternatives. This study investigates the use of non-cementitious traditional mixtures for green construction applications through 3D printing using Liquid Deposition Modeling (LDM) technology. To explore the development of mixtures with enhanced physical and mechanical properties, natural pine and cypress wood shavings were added in varying proportions (1%, 3%, and 5%) as sustainable additives. The aim of this study is twofold: first, to demonstrate the printability of these eco-friendly mortars that can be used for conservation purposes and overcome the challenges of incorporating bio-products in 3D printing; and second, to develop sustainable composites that align with the objectives of the European Green Deal, offering low-emission construction solutions. The proposed mortars use hydrated lime and natural pozzolan as binders, river sand as an aggregate, and a polycarboxylate superplasticizer. While most studies with bio-products focus on traditional methods, this research provides proof of concept for their use in 3D printing. The study results indicate that, at low percentages, both additives had minimal effect on the physical and mechanical properties of the tested mortars, whereas higher percentages led to progressively more significant deterioration. Additionally, compared to molded specimens, the 3D-printed mortars exhibited slightly reduced mechanical strength and increased porosity, attributable to insufficient compaction during the printing process.

The agricultural sector faces numerous challenges in ensuring optimal soil health and environmental conditions for sustainable crop production. Traditional soil analysis methods are often time-consuming and labor-intensive, and provide limited real-time data, making it challenging for farmers to make informed decisions. In recent years, Internet of Things (IoT) technology has emerged as a promising solution to address these challenges by enabling efficient and automated soil analysis and environmental monitoring. This paper presents a 3D-printed IoT-based Agro-toolbox, designed for comprehensive soil analysis and environmental monitoring in the agricultural domain. The toolbox integrates various sensors for both soil and environmental measurements. By deploying this tool across fields, farmers can continuously monitor key soil parameters, including pH levels, moisture content, and temperature. Additionally, environmental factors such as ambient temperature, humidity, intensity of visible light, and barometric pressure can be monitored to assess the overall health of agricultural ecosystems. To evaluate the effectiveness of the Agro-toolbox, a case study was conducted in an aquaponics floating system with rocket, and benchmarking was performed using commercial tools that integrate sensors for soil temperature, moisture, and pH levels, as well as for air temperature, humidity, and intensity of visible light. The results showed that the Agro-toolbox had an acceptable error percentage, and it can be useful for agricultural applications.

Towards a sustainable future in construction, worldwide efforts aim to reduce cement use as a binder core material in concrete, addressing production costs, environmental concerns, and circular economy criteria. In the last decade, numerous studies have explored cement substitutes (e.g., fly ash, silica fume, clay-based materials, etc.) and methods to mimic the mechanical performance of cement by integrating polymeric meshes into their matrix. In this study, a systemic approach incorporating computer aid and biomimetics is utilized for the development of 3D-printed clay-based composite mortar reinforced with advanced polymeric bioinspired lattice structures, such as honeycombs and Voronoi patterns. These natural lattices were designed and integrated into the 3D-printed clay-based prisms. Then, these configurations were numerically examined as bioinspired lattice applications under three-point bending and realistic loading conditions, and proper Finite Element Models (FEMs) were developed. The extracted mechanical responses were observed, and a conceptual redesign of the bioinspired lattice structures was conducted to mitigate high-stress concentration regions and optimize the structures’ overall mechanical performance. The optimized bioinspired lattice structures were also examined under the same conditions to verify their mechanical superiority. The results showed that the clay-based prism with honeycomb reinforcement revealed superior mechanical performance compared to the other and is a suitable candidate for further research. The outcomes of this study intend to further research into non-cementitious materials suitable for industrial and civil applications.

This study explores the valorization of tomato stem waste by converting it into biochar through slow pyrolysis and incorporating it into poly(lactic acid) (PLA) composites for fused filament fabrication (FFF) 3D printing. The objective was to improve the valorization and added value of tomato stem waste. Biochar derived from tomato stems was characterized for its physicochemical properties, revealing a high surface area and small particle size. PLA-based composite filaments with 5% and 7.5% biochar were manufactured via melt extrusion. The effects of biochar concentration and printing infill patterns (concentric and rectilinear) on the mechanical and thermomechanical properties of the 3D-printed composites were investigated. Results indicated that biochar slightly increased the glass transition temperature of PLA and improved the flexural properties. Dynamic mechanical analysis (DMA) showed that the storage modulus was enhanced in the glassy region for composites with 5% biochar, suggesting improved stiffness. This research demonstrates the potential of using tomato stem-derived biochar as a sustainable filler in PLA composites, contributing to the circular economy and reducing environmental impact.

Hyperspectral imaging has revolutionized various scientific fields by enabling a detailed analysis of objects and materials based on their spectral signatures. However, the high cost and complexity of commercial hyperspectral camera systems limit their accessibility to researchers and professionals. In this paper, a do-it-yourself (DIY) hyperspectral camera device that offers a cost-effective and user-friendly alternative to hyperspectral imaging is presented. The proposed device leverages off-the-shelf components, commercially available hardware parts, open-source software, and novel calibration techniques to capture and process hyperspectral imaging data. The design considerations, hardware components, and construction process are discussed, providing a comprehensive guide for building the device. Furthermore, the performance of the DIY hyperspectral camera is investigated through experimental evaluations with a multi-color 3D-printed box in order to validate its sensitivities to red, green, blue, orange and white colors.

Selective Laser Melting (SLM) is a specific 3D printing technique under Additive Manufacturing (AM) metal technologies. SLM is considered to be a precise rapid AM process combined with a powder bed system for producing customized metal products with a tailored microstructure and shape. Differences in the printing parameters can lead to differences in the surface as well as macroscopic mechanical characteristics of the manufactured parts and components. This work aims at quantifying the effect of the Volumetric Energy Density (VED) used in the SLM processing of various metals and alloys. Metallic specimens printed with different VED values were subjected to surface characterization as well as tensile deformation. Their surface roughness, yield stress and toughness were subsequently used to verify a linear relationship between roughness and VED, and a linear behavior between yield stress/toughness and VED was proposed. Predictive models were formulated for estimating the roughness/yield stress/toughness of the produced specimens with respect to the VED used in their production. The models’ predictions will provide insight into the 3D printing parameters, thus minimizing the cost and effort of the 3D printing procedure, in applications where surface quality and strength are important.

In the last decade, there has been a notable advancement in diverse bioreactor types catering to various applications. However, conventional bioreactors often exhibit bulkiness and high costs, making them less accessible to many researchers and laboratory facilities. In light of these challenges, this article aims to introduce and evaluate the development of a do-it-yourself (DIY) 3D printed smart bioreactor, offering a cost-effective and user-friendly solution for the proliferation of various bioentities, including bacteria and human organoids, among others. The customized bioreactor was fabricated under an ergonomic design and assembled with 3D printed mechanical parts combined with electronic components, under 3D printed housing. The 3D printed parts were designed using SOLIDWORKS® CAD Software (2022 SP2.0 Professional version) and fabricated via the fused filament fabrication (FFF) technique. All parts were 3D printed with acrylonitrile butadiene styrene (ABS) in order for the bioreactor to be used under sterile conditions. The printed low-cost bioreactor integrates Internet-of-things (IoT) functionalities, since it provides the operator with the ability to change its operational parameters (sampling frequency, rotor speed, and duty cycle) remotely, via a user-friendly developed mobile application and to save the user history locally on the device. Using this bioreactor, which is adjusted to a standard commercial 12-well plate, proof of concept of a successful operation of the bioreactor during a 2-day culture of Escherichia coli bacteria (Mach1 strain) is presented. This study paves the way for more in-depth investigation of bacterial and various biological-entity growth cultures, utilizing 3D printing technology to create customized low-cost bioreactors.

Citizen science reinforces the development of emergent tools for the surveillance, monitoring, and early detection of biological invasions, enhancing biosecurity resilience. The contribution of farmers and farm citizens is vital, as volunteers can strengthen the effectiveness and efficiency of environmental observations, improve surveillance efforts, and aid in delimiting areas affected by plant-spread diseases and pests. This study presents a robust, user-friendly, and cost-effective smart module for citizen science that incorporates a cutting-edge developed hyperspectral imaging (HI) module, integrated in a single, energy-independent device and paired with a smartphone. The proposed module can empower farmers, farming communities, and citizens to easily capture and transmit data on crop conditions, plant disease symptoms (biotic and abiotic), and pest attacks. The developed HI-based module is interconnected with a smart embedded system (SES), which allows for the capture of hyperspectral images. Simultaneously, it enables multimodal analysis using the integrated environmental sensors on the module. These data are processed at the edge using lightweight Deep Learning algorithms for the detection and identification of Tuta absoluta (Meyrick), the most important invaded alien and devastating pest of tomato. The innovative Artificial Intelligence (AI)-based module offers open interfaces to passive surveillance platforms, Decision Support Systems (DSSs), and early warning surveillance systems, establishing a seamless environment where innovation and utility converge to enhance crop health and productivity and biodiversity protection.

Agricultural waste is a renewable source of lignocellulosic components, which can be processed in a variety of ways to yield added-value materials for various applications, e.g., polymer composites. However, most lignocellulosic biomass is incinerated for energy. Typically, agricultural waste is left to decompose in the fields, causing problems such as greenhouse gas release, attracting insects and rodents, and impacting soil fertility. This study aims to valorise nonedible tomato waste with no commercial value in Additive Manufacturing (AM) to create sustainable, cost-effective and added-value PLA composites. Fused Filament Fabrication (FFF) filaments with 5 and 10 wt.% tomato stem powder (TSP) were developed, and 3D-printed specimens were tested. Mechanical testing showed consistent tensile properties with 5% TSP addition, while flexural strength decreased, possibly due to void formation. Dynamic mechanical analysis (DMA) indicated changes in storage modulus and damping factor with TSP addition. Notably, the composites exhibited antioxidant activity, increasing with higher TSP content. These findings underscore the potential of agricultural waste utilization in FFF, offering insights into greener waste management practices and addressing challenges in mechanical performance and material compatibility. This research highlights the viability of integrating agricultural waste into filament-based AM, contributing to sustainable agricultural practices and promoting circular economy initiatives.

Additive manufacturing (AM) technologies, including 3D mortar printing (3DMP), 3D concrete printing (3DCP), and Liquid Deposition Modeling (LDM), offer significant advantages in construction. They reduce project time, costs, and resource requirements while enabling free design possibilities and automating construction processes, thereby reducing workplace accidents. However, AM faces challenges in achieving superior mechanical performance compared to traditional methods due to poor interlayer bonding and material anisotropies. This study aims to enhance structural properties in AM constructions by embedding 3D-printed polymeric meshes in clay-based mortars. Clay-based materials are chosen for their environmental benefits. The study uses meshes with optimal geometry from the literature, printed with three widely used polymeric materials in 3D printing applications (PLA, ABS, and PETG). To reinforce the mechanical properties of the printed specimens, the meshes were strategically placed in the interlayer direction during the 3D printing process. The results show that the 3D-printed specimens with meshes have improved flexural strength, validating the successful integration of these reinforcements.