Explore the vast range of titles available.

Tannins are eco-friendly, bio-sourced, natural, and highly reactive polyphenols. In the past decades, the understanding of their versatile properties has grown substantially alongside a continuously broadening of the tannins’ application scope. In particular, recently, tannins have been increasingly investigated for their interaction with other species in order to obtain tannin-based hybrid systems that feature advanced and/or novel properties. Furthermore, in virtue of the tannins’ chemistry and their high reactivity, they either physicochemically or physically interact with a wide variety of different compounds, including metals and ceramics, as well as a number of organic species. Such hybrid or hybrid-like systems allow the preparation of various advanced nanomaterials, featuring improved performances compared to the current ones. Consequently, these diverse-shaped materials have potential use in wastewater treatment or catalysis, as well as in some novel fields such as UV-shielding, functional food packaging, and biomedicine. Since these kinds of tannin-based hybrids represent an emerging field, thus far no comprehensive overview concerning their potential as functional chemical building blocks is available. Hence, this review aims to provide a structured summary of the current state of research regarding tannin-based hybrids, detailed findings on the chemical mechanisms as well as their fields of application.

Walnut and hazelnut shells are agricultural by-products, available in high quantities during the harvest season. The potential of using these two agricultural residues as raw materials in particleboard production has been evaluated in this study. Different panels with either walnut or hazelnut shells in combination with melamine-urea formaldehyde or polyurethane at the same level of 1000 kg/m3 density were produced in a laboratory hot press and mechanical properties (modulus of elasticity, bending strength, and Brinell hardness) and physical properties (thickness swelling and water absorption) were determined, together with formaldehyde content. Although Brinell hardness was 35% to 65% higher for the nutshell-based panels, bending strength and modulus of elasticity were 40% to 50% lower for the melamine-urea formaldehyde bonded nutshells compared to spruce particleboards, but was 65% higher in the case of using polyurethane. Water absorption and thickness swelling could be reduced significantly for the nutshell-based boards compared to the spruce boards (the values recorded ranged between 58% to 87% lower as for the particleboards). Using polyurethane as an adhesive has benefits for water uptake and thickness swelling and also for bending strength and modulus of elasticity. The free formaldehyde content of the lignocellulosic-based panels was included in the E0 category (≤2.5 mg/100 g) for both walnut and hazelnut shell raw materials and the use of polyurethane improved these values to super E0 category (≤1.5 mg/100 g).

In recent years, the variety of materials for fused layer modeling (FLM) 3D printing has expanded considerably, and new smart materials such as shape memory polymers (SMPs) have been added. Such SMPs enable so-called 4D printing, a programmable shape transformation of FLM 3D printed objects over time due to an external stimulus such as moisture or temperature. This paper addresses the processing of a specially fabricated climate-responsive wood/polylactic acid (PLA) composite using FLM 3D printing and the application of varying print directions for manufacturing programmable shape changing objects. In addition, this study is about developing a two-dimensional mathematical model based on the linear difference method to forecast accurately the moisture-induced deformation behaviour of 4D printed objects. Furthermore, the occurring deformations of the 4D printed objects were recorded using 3D scanning technology and compared with the simulated deformations from the mathematical model for validation purposes. With the help of the developed two-dimensional mathematical model, an exact reproduction of the deformation behaviour of 4D printed objects was made with a deviation percentage of always less than 6.5%.

Light Paulownia seamless-edged glued solid wood panels (SWPs), single-layered and three-layered, were analyzed in this study. Both panel types were calibrated at a thickness of 19 mm, a dimension very often in demand on the SWP market, but produced with other wood species (for example, spruce, pine, larch and fir). The panels were bonded with melamine-urea formaldehyde, polyurethane and polyvinyl acetate resins. The panels were tested for their physical (density) and mechanical (modulus of rupture, modulus of elasticity, compressive shear strength and wood breakage rate) properties. For the single-layered panels, the mechanical and physical properties did not differ significantly and were similar to massive Paulownia wood. For the three-layered panels, the adhesive application of polyurethane influenced positively all SWP properties. Considering the differences in density, these composites failed to achieve the performance of one- and single-layered panels made of spruce. The results of these findings recommend Paulownia SWPs to be used as lightweight and sustainable core materials in sandwich structures for the furniture and packaging industry, sport articles or non-load-bearing constructions.

With the extensive use of nitrogen-based fertilizer in agriculture, ammonia emissions, especially from cattle manure, are a serious environmental threat for soil and air. The European community committed to reduce the ammonia emissions by 30% by the year 2030 compared to 2005. After a moderate initial reduction, the last report showed no further improvements in the last four years, keeping the 30% reduction a very challenging target for the next decade. In this study, the mitigation effect of different types of tannin and tannin-based adsorbent on the ammonia emission from manure was investigated. Firstly, we conducted a template study monitoring the ammonia emissions registered by addition of the tannin-based powders to a 0.1% ammonia solution and then we repeated the experiments with ready-to-spread farm-made manure slurry. The results showed that all tannin-based powders induced sensible reduction of pH and ammonia emitted. Reductions higher than 75% and 95% were registered for ammonia solution and cattle slurry, respectively, when using flavonoid-based powders. These findings are very promising considering that tannins and their derivatives will be extensively available due to the increasing interest on their exploitation for the synthesis of new-generation “green” materials.

With the increasing demand for food worldwide, the use of fertilizers in the agricultural industry has grown. Natural fertilizers derived from the use of animal manure slurry, especially cattle and cow, are responsible for 40% of the agricultural ammonia emission. The EU defined the goal to reduce NH3 emission drastically until 2030, yet until today an overall increase has been observed, making it more difficult to reach the target. In this study, we used two by-products from the dairy industry, namely flushing milk and acidic whey, to lower the pH of cattle manure slurry and therefore mitigate the loss of nitrogen in the form of ammonia into the atmosphere, making it available in the soil. Measurements of pH, ammonium nitrogen, total Kjeldahl nitrogen, and lactic acid bacteria colonies were conducted in a lab-scale experiment to test the hypothesis. Afterwards, pH measurements were conducted on bigger samples. We found that whey effectively reduced the pH of manure below 5, therefore moving the ammonia/ammonium equilibrium strongly towards ammonium. Flushing milk on the other hand lowered the pH to a smaller extent, yet allowed for faster hydrolysis of urea into ammonium. The findings in this study present a suitable and environmentally friendly approach to help reach the climate goals set by the EU by using by-products from the same industry branch, therefore being a suitable example of circular economy.

Traceability of natural resources, from the cradle to the final product is a crucial issue to secure sustainable material usage as well as to optimize and control processes over the whole supply chain. In the forest products industries the material can be tracked by different technologies, but for the first step of material flow, from the forest to the industry, no systematic and complete technology has been developed. On the way to close this data gap the fingerprint technology for wooden logs looks promising. It uses inherent properties of a wood stem for identification. In this paper hyperspectral cameras are applied to gain images of Norway spruce (Picea abies [L.] Karst.) log end faces in different spectral ranges. The images are converted to a biometric template of feature vectors and a matching algorithm is used to evaluate if the biometric templates are similar or not. Based on this, matching scores specific spectral ranges which contain information to distinguish between different log end faces are identified. The method developed in this paper is a necessary and successful step to define scanning system parameters for fingerprint recognition systems for wood log traceability from the forest.

Key messageThis article presents the leaching, fire and weathering resistance improvements of samples treated with tannin-based wood preservatives added of caprolactam. PEG-added formulations show limited applicability. The FT-IR and13C-NMR analyses of the caprolactam-added formulations show some evidences of copolymerization.ContextTannin-boron wood preservatives are known for their high resistance against leaching, biological attacks, fire as well as for the good mechanical properties that they impart to wood. These properties promoted these formulations for being a candidate for the protection of green buildings. However, the low elasticity of these polymers and their dark colour implied limited weathering resistances.AimsThe aim of the study is to find suitable additives for tannin-based formulations to overcome their limited weathering resistances, without compromising the other properties.MethodsTreatment, leaching and fire tests, dimensional stability as well as artificial and natural weathering of the timber treated with caprolactam-added and PEG-added formulations were performed. FT-IR and 13C-NMR of the formulations were presented.ResultsThe presence of caprolactam improved the properties of the formulation with particularly significant results in terms of resistance against leaching and dimensional stability. These enhancements were imparted also to the weathering resistance of the tannin-caprolactam formulations. Indeed, the colour changes during the artificial and natural exposures were stable for longer periods. FT-IR and 13C-NMR investigations of the advanced formulations were led, and covalent copolymerization of the caprolactam with the tannin-hexamine polymer was observed.ConclusionThe tannin formulations with caprolactam improved the durability of the wood specimens, while the PEG-tannin presented strong application drawbacks.

A key challenge in applied science when planning a designed experiment is to determine the aliasing structure of the interaction effects and selecting the appropriate levels for the factors. In this study, kernel tree methods are used as precursors to identify significant interactions and levels of the factors useful for developing a designed experiment. This approach is aligned with integrating data science with the applied sciences to reduce the time from innovation in research and development to the advancement of new products, a very important consideration in today’s world of rapid advancements in industries such as pharmaceutical, medicine, aerospace, etc. Significant interaction effects for six common independent variables using boosted trees and random forests of k = 1000 and k = 10,000 bootstraps were identified from industrial databases. The four common variables were related to speed, pressing time, pressing temperature, and fiber refining. These common variables maximized tensile strength of medium density fiberboard (MDF) and the ultimate static load of oriented strand board (OSB), both widely-used industrial products. Given the results of the kernel tree methods, four possible designs with interaction effects were developed: full factorial, fractional factorial Resolution IV, Box–Behnken, and Central Composite Designs (CCD).

The current research intended to investigate the suitability of different choline-chloride-based deep eutectic solvents for their role in microwave lignin extraction. Lignin, a widely spread biopolymer in plants and woody structures, is a valuable replacement for fossil-fuel-based materials. While some promising applications have been trialled already, the extraction of this material from its matrix still causes problems. Here, we highlight an efficient and fast method to extract lignin from untreated larch bark with deep eutectic solvents in a standard domestic microwave. We developed a straightforward, green methodology, which can be used on various reaction scales, with materials available to many researchers. Lignin was extracted within only 30 min of microwave irradiation in yields of up to 96%. Compared to traditional deep eutectic extraction by conventional heating, the reaction time was cut by 87% and the energy costs were reduced by 93.5%. The hydrogen bond donors were exchanged and different types, namely acid-based, hydroxyl-based and amide-based donor systems, were evaluated for their suitability concerning microwave lignin extraction. This study presents a novel approach towards energy-efficient and green lignin valorisation, without the inherent need for costly equipment.