Explore the vast range of titles available.

The aim of this study was to evaluate the interaction between Streptococcus oralis and Polyetheretherketone (PEEK), a novel material recently introduced in implantology. The topographical characterization and the Streptococcus oralis adhesion on this material were compared with other titanium surfaces, currently used for the production of dental implants: machined and double etched (DAE). The superficial micro-roughness of the PEEK discs was analyzed by scanning electron microscopy (SEM) and, the Energy Dispersive Spectrometer (EDS) analyzed their chemical composition. Atomic Force Microscopy (AFM) was used to characterize the micro-topography and the sessile method to evaluate the wettability of the samples. Microbiological analysis measured the colony forming units (CFUs), the biomass (OD570 detection) and the cell viability after 24 and 48 h after Streptococcus oralis cultivation on the different discs, that were previously incubated with saliva. Results showed that PEEK was characterized by a micro-roughness that was similar to machined titanium but at nano-level the nano-roughness was significantly higher in respect to the other samples. The EDS showed that PEEK superficial composition was characterized mainly by Carbonium and Oxygen. The hydrophilicity and wetting properties of PEEK were similar to machined titanium; on the contrary, double etched discs (DAE) samples were characterized by significantly higher levels (p < 0.05). PEEK was characterized by significant lower CFUs, biomass and viable cells in respect to the titanium surfaces. No differences were found between machined and DAE. The anti-adhesive and antibacterial properties showed by PEEK at 24 and 48 h against a pioneer such as S. oralis, could have an important role in the prevention of all pathologies connected with biofilm formation, like peri-implantitis in dentistry or prosthetic failures in orthopedics.

Snail slime (SS) is a natural secretion rich in bioactive components such as glycoproteins, hyaluronic acid, glycolic acid (GA), and antimicrobial peptides. GA, a key component of SS, is known for its exfoliative properties. This study investigates SS’s effects on keratinocytes (HaCaT) and endothelial cells (ECs), comparing its properties to those of GA. HaCaT cell viability and cytotoxicity, ROS release, and inflammation-related signaling (PI3K/Akt/NF-κB and COX-2 gene expression) were assessed. Extracellular matrix (ECM) remodeling was evaluated by gene expression of MMPs. In ECs, a preliminary evaluation of SS’s effect was conducted in terms of cell viability and migration. Results demonstrated that SS is well tolerated by keratinocytes whereas GA exhibits cytotoxicity, suggesting that SS’s natural composition mitigates GA’s adverse effects. SS induced a controlled, brief inflammatory response, via the PI3K/Akt/NF-κB pathway, unlike GA, responsible for stronger and sustained pro-inflammatory events. Additionally, SS, through the upregulation of MMPs, contributes to ECM remodeling. In ECs, SS preserves viability and also enhances migration, thus supporting wound healing. These findings highlight SS’s ability to balance pro-inflammatory events, making it a promising candidate for advanced dermatological applications, underscoring SS’s potential in modulating key cellular signaling pathways, and supporting its future therapeutic prospects in wound healing.

Chronic wound management becomes a complex procedure because of the persistence of forming biofilm pathogens that do not respond to antimicrobial treatment. The aim of this paper is to detect the Graphene Oxide-GO effect on Staphylococcus aureus and Pseudomonas aeruginosa dual species wound biofilm in Lubbock Chronic Wound Biofilm-LCWB model. LCWB is a recognized model that mimics the spatial microbial colonization into chronic wounds and reproduces the wound and its clot. Staphylococcus aureus PECHA 10 and P. aeruginosa PECHA 4, are the pathogens used in the study. The GO effect on both in forming and mature biofilms, is detected by the evaluation of the CFU/mg reduction, the cell viability and ultrastructural analysis of the treated LCWBs. Graphene Oxide, at 50 mg/l, shows a significant antibiofilm effect in forming and mature LCWBs. In particular, during the biofilm formation, GO reduces the S. aureus and P. aeruginosa growth of 55.05% ± 4.73 and 44.18% ± 3.91 compared to the control. In mature biofilm, GO affects S. aureus and P. aeruginosa by reducing their growth of 70.24% ± 4.47 and 63.68% ± 17.56, respectively. Images taken by SEM show that GO display a disaggregated microbial effect also disrupting the fibrin network of the wound-like biofilm framework. In conclusion, GO used against microorganisms grown in LCWB, displays a significant inhibitory action resulting in a promising tool for potential application in wound management.

Stimuli-responsive liposomal membranes have attracted growing interest as dynamic soft materials capable of regulating permeability, fusion, and cargo release in response to external or internal triggers. By incorporating functional molecular or nanostructured guests, such as photochromic compounds, plasmonic nanoparticles, or ionizable lipids, bilayers can be endowed with reversible and tunable properties. These modifications often rely on the precise control of lipid packing, phase behaviour, and the formation of transient membrane defects that facilitate molecular transport. This review aims to provide an overview of the molecular design strategies and underlying mechanisms used to engineer such responsive liposomal systems, with particular emphasis on light- and heat-triggered behaviours and on supramolecular approaches that modulate membrane structure and dynamics. Emerging trends, current limitations, and opportunities for future development in functional lipid-based materials and biointerfaces will also be discussed.

Background The isolation and proteomics characterization of extracellular vesicles (EVs) from body fluids is challenging due to their vast heterogeneity. We have recently demonstrated that Fluorescence-activated Cell Sorting (FACS) efficiently isolates the whole EV circulating compartment directly from untouched body fluids enabling a comprehensive EV proteomics analysis. Results Here, we characterized, for the first time, a single-phenotype EV subset by sorting leukocyte-derived EVs (Leuko EVs) from peripheral blood and tears of healthy volunteers. Using an optimized and patented staining protocol of the whole EV compartment we identified and excluded non-EV particles, debris and damaged EVs. We further isolated, using an anti-CD45 antibody, Leuko EVs (CD45+ EVs), reaching a high level of purity (> 90%). Purified Leuko EVs were characterized using atomic force microscopy, nanoparticle tracking, and shotgun proteomics analysis revealing a similar coded protein cargo in both biological fluids. Subsequently, the same workflow was applied to tears from Relapsing–Remitting Multiple Sclerosis (RRMS) patients, revealing a Leuko EVs protein cargo enrichment that reflects the neuroinflammatory condition characteristics of RRMS. This enrichment was evidenced by the activation of upstream regulators TGFB1 and NFE2L2 , which are associated with inflammatory responses. Additionally, the analysis identified markers indicative of endothelial cell proliferation and the development of enhanced vascular networks, with AGNPT2 and VEGF emerging as activated upstream regulators. These findings indicate the complex interplay between inflammation and angiogenesis in RRMS. Conclusions In conclusion, our combined FACS-Proteomics strategy offers a promising approach for biomarker discovery, analysing cell-specific EV phenotypes directly from untouched body fluids, advancing the clinical value of tears EVs and improving the understanding of EV-mediated processes in vivo. Data are available via ProteomeXchange with the identifier PXD049036 and in EV-TRACK knowledgebase with ID: EV240150.

Extracellular vesicles (EVs) express features of parental cells and are fundamental in modulating the crosstalk between cancer cells and their environment. Increasing evidence suggests that EVs have a pivotal role in tumorigenesis, cancer development, and drug resistance. EVs are also involved in controlling the communication between hematopoietic stem cells and the surrounding microenvironment in the bone marrow (BM), during several processes such as self-renewal, mobilization, and lineage differentiation. Proteins expressed in cancer cell-derived EVs can be useful to further understand the regulation of hematopoietic stem cell fate, a fundamental mechanism in acute myeloid leukemia (AML). Furthermore, EVs are implicated in transmitting drug-resistance mechanisms in solid and not-solid cancer types. Here, using a proteomic approach, we analyze and validate the protein profile of EVs from three AML cell lines with different genotypes, namely OCI-AML-2, OCI-AML-3, and HL-60. The majority of the identified proteins were significantly enriched in the Gene Ontology category ‘Extracellular Exosome’. Network model analysis of EV proteins revealed several significantly modulated pathways, including inflammation activation and metastatic processes in AML cell-derived EVs. The EVs proteomic profiling allows us to identify the EVs-associated molecules and pathways that could impact cancer progression and drug resistance.

Liposomes loaded with drug–cyclodextrin complexes are widely used as drug delivery systems, especially for species with low aqueous solubility and stability. Investigation of the intimate interactions of macrocycles with liposomes are essential for formulation of efficient and stable drug-in-cyclodextrin-in-liposome carriers. In this work, we reported the preparation of unilamellar vesicles of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) embedded with native β-cyclodextrin and two synthetic derivatives: heptakis(2,3,6-tri-O-methyl)-β-cyclodextrin (TMCD) and heptakis(2,3-di-O-acetyl)-β-cyclodextrin (DACD). We then studied the effect of these macrocycles on the liposomal size, membrane viscosity, and liposomal stability at different temperatures and concentrations. We observed that TMCD and DACD affected vesicle size and the change of size was related to CD concentration. Irrespective of its nature, the macrocycle established interactions with the phospholipidic head groups, preventing cyclodextrins to diffuse into the lipid bilayer, as confirmed by molecular dynamics simulations. Such supramolecular structuring improves liposome stability making these colloid systems promising carriers for biologically active compounds.

Background: antimicrobial resistance represents a critical issue leading to delayed wound healing; hence, it is necessary to develop novel strategies to address this phenomenon. Objectives: this study aimed to explore the antimicrobial/anti-virulence action of Methylglyoxal-MGO alone or combined with novel technologies such as Light-Emitting Diodes-LED and Complex Magnetic Fields-CMFs against resistant clinical strains isolated from chronic wounds. Methods: characterized planktonic Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans isolates were used. Antimicrobial activity was evaluated by measuring optical density, Colony Forming Units-CFU, and synergy between MGO/LED or CMFs. Cellular membrane permeability by propidium iodide fluorescence and fluidity by Laurdan generalized polarization measurements were performed. P. aeruginosa motility was tested using the soft agar method. A docking study was performed to evaluate the possible interaction between MGO and urease in P. aeruginosa. Results: single/combined treatments showed significant antimicrobial activity. Major CFU reduction was detected after CMFs/MGO+CMFs application on C. albicans. Treatments exhibited significant changes in membrane permeability and fluidity. The treatments decreased P. aeruginosa motility with a major reduction after LED application. Docking analysis showed that MGO could bind with P. aeruginosa urease leading to defective folding and functional alterations. Conclusions: the results suggest that these treatments could represent promising and green therapeutic solutions against resistant isolates from chronic wounds.

Poly(methyl methacrylate) (PMMA) is characterized by high CO2 capture yield under mild pressures and temperatures. A morphological modification of powdery amorphous PMMA (pPMMA) is carried out by electrospinning to increase the surface/volume ratio of the resulting electrospun PMMAs (ePMMAs). This modification improves the kinetics and the capture yields. The rate constants observed for ePMMAs are two to three times higher than those for pPMMA, reaching 90% saturation values within 5–7 s. The amount of sorbed CO2 is up to eleven times higher for ePMMAs at 1 °C, and the highest difference in captured CO2 amount is observed at the lowest tested pressure of 1 MPa. The operating life of the ePMMAs shows a 5% yield loss after ten consecutive runs, indicating good durability. Spent electrospun PMMAs after several cycles of CO2 sorption-desorption can be regenerated by melting and again electrospinning the molten mass, resulting in a CO2 capture performance that is undistinguishable from that observed with fresh ePMMA. Scanning electron and atomic force microscopies show a reduction in surface roughness after gas exposure, possibly due to the plasticization effect of CO2. This study shows the potential of electrospun PMMAs as solid sorbents for carbon capture from natural gas or pre-combustion and oxyfuel combustion processes.

In this work, a sorbent was prepared from wastepaper samples enriched with iron oxide particles and graphene oxide and used in the solid phase extraction of antibiotics. The precursor underwent a carbothermal reduction to promote the formation of paramagnetic phases useful for the recovery of the sorbent during the analysis, and to disperse and fix graphene and the iron oxide in a durable way throughout the cellulose structure. Characterizations were carried out to evaluate the composition (Raman, XRD and EDX) and the morphological structure (SEM) of the material. A UHPLC-PDA method was developed for the simultaneous determination of antibiotics from different drug families (carbapenems, fluoroquinolones, β-lactams) using a 120 SB-C 18 poroshell column (50 × 2.1 mm I.D., 2.7 um particle size) and a mobile phase consisting of 10 mM acetate buffer at pH 5 (Line A) and acetonitrile (Line B) both containing 0.1% of triethylamine. A gradient elution was used for the separation of the analytes, while for the quantitative analysis each analyte was determined at its maximum wavelength. Several experiments were carried out to evaluate the influence of different parameters involving the dispersive magnetic solid phase extraction of these analytes. Samples were extracted using 25 mg of sorbent at pH 5 and desorbed in 5 min using methanol. We report herein on some of the outstanding advantages of using carbon-based sorbent, such as lower toxicity, scalability, improved absorption capacity, target selectivity and stability in acidic medium. Moreover, from the results obtained it is evident that, despite the use of some recycled materials, the performances obtained were comparable or even superior to the methods reported in the literature.