Explore the vast range of titles available.

The ubiquitous presence of microplastics (MPs) and their health effects is a recent scientific topic. However, the investigation of MPs in human/biological matrices has several limitations due to analytical methods and sample treatment protocols. In this study, the presence of MPs in the urine samples of six volunteers from different cities in the south of Italy (three men and three women) was investigated by Raman microspectroscopy. The analysis pinpointed four pigmented microplastic fragments (4–15 μm size), with irregular shapes, which were characterized in terms of morphology and chemical composition. Polyethylene vinyl acetate (PVA), polyvinyl chloride (PVC), polypropylene (PP), and polyethylene (PE) MPs were found in four samples (PVA and PVC in one female sample and PP and PE in three male samples). This preliminary study suggests that MPs could pass through the gastrointestinal tract and are eliminated through biological processes.

Recently, studies on microplastics (MPs) have increased rapidly due to the growing awareness of the potential health risks related to their occurrence. The first part of this review is devoted to MP occurrence, distribution, and quantification. MPs can be transferred from the environment to humans mainly through inhalation, secondly from ingestion, and, to a lesser extent, through dermal contact. As regards food web contamination, we discuss the microplastic presence not only in the most investigated sources, such as seafood, drinking water, and salts, but also in other foods such as honey, sugar, milk, fruit, and meat (chickens, cows, and pigs). All literature data suggest not-negligible human exposure to MPs through the above-mentioned routes. Consequently, several research efforts have been devoted to assessing potential human health risks. Initially, toxicological studies were conducted with aquatic organisms and then with experimental mammal animal models and human cell cultures. In the latter case, toxicological effects were observed at high concentrations of MPs (polystyrene is the most common MP benchmark) for a short time. Further studies must be performed to assess the real consequences of MP contamination at low concentrations and prolonged exposure.

In the last decade or so, polychlorinated biphenyls (PCBs) garnered renewed attention in the scientific community due to new evidence pointing at their continued presence in the environment and workplaces and the potential human risks related to their presence. PCBs move from the environment to humans through different routes; the dominant pathway is the ingestion of contaminated foods (fish, seafood and dairy products), followed by inhalation (both indoor and outdoor air), and, to a lesser extent, dust ingestion and dermal contact. Numerous studies reported the environmental and occupational exposure to these pollutants, deriving from building materials (flame-retardants, plasticizers, paints, caulking compounds, sealants, fluorescent light ballasts, etc.) and electrical equipment. The highest PCBs contaminations were detected in e-waste recycling sites, suggesting the need for the implementation of remediation strategies of such polluted areas to safeguard the health of workers and local populations. Furthermore, a significant correlation between PCB exposure and increased blood PCB concentrations was observed in people working in PCB-contaminated workplaces. Several epidemiological studies suggest that environmental and occupational exposure to high concentrations of PCBs is associated with different health outcomes, such as neuropsychological and neurobehavioral deficits, dementia, immune system dysfunctions, cardiovascular diseases and cancer. In addition, recent studies indicate that PCBs bioaccumulation can reduce fertility, with harmful effects on the reproductive system that can be passed to offspring. In the near future, further studies are needed to assess the real effects of PCBs exposure at low concentrations for prolonged exposure in workplaces and specific indoor environments.

Endocrine-disrupting compounds (EDCs) as emerging contaminants have accumulated in the aquatic environment at concentration levels that have been determined to be significant to humans and animals. Several compounds belong to this family, from natural substances (hormones such as estrone, 17-estradiol, and estriol) to synthetic chemicals, especially pesticides, pharmaceuticals, and plastic-derived compounds (phthalates, bisphenol A). In this review, we discuss recent works regarding EDC occurrence in the aquatic compartment, strengths and limitations of current analytical methods used for their detection, treatment technologies for their removal from water, and the health issues that they can trigger in humans. Nowadays, many EDCs have been identified in significant amounts in different water matrices including drinking water, thus increasing the possibility of entering the food chain. Several studies correlate human exposure to high concentrations of EDCs with serious effects such as infertility, thyroid dysfunction, early puberty, endometriosis, diabetes, and obesity. Although our intention is not to explain all disorders related to EDCs exposure, this review aims to guide future research towards a deeper knowledge of EDCs’ contamination and accumulation in water, highlighting their toxicity and exposure risks to humans.

Microplastics (MP) have recently been considered as emerging contaminants in the water environment. In the last number of years, the number of studies on MP has grown quickly due to the increasing consciousness of the potential risks for human health related to MP exposure. The present review article discusses scientific literature regarding MP occurrence and accumulation on the aquatic compartment (river, lake, wastewater, seafood), the analytical methods used to assess their concentration, their fate and transport to humans, and delineates the urgent areas for future research. To better analogize literature data regarding MP occurrence in the aquatic compartment we subdivided papers based on sampling, analytical methods, and concentration units with the aim to help the reader identify the similarities and differences of the considered research papers, thus making the comparison of literature data easier and the individuation of the most relevant articles for the reader’s interests faster. Furthermore, we argued about several ways for MP transport to humans, highlighting some gaps in analytical methods based on the reviewed publications. We suggest improving studies on developing standardized protocols to collect, process, and analyze samples.

This study investigated the performance of 24 commercial disinfectants present on the market during last year according to the manufacturer’s instructions. Recently, national and international organizations of public health performed studies on disinfection products due to the increasing awareness of the potential and growing risks on human health, such as skin damage and reactions in the mucosal lining, especially for the healthcare workers in their frequent daily use. However, there are many limitations in the common cleaning/disinfection products on market as in the selection of effective disinfectants to decontaminate inanimate surfaces. We analyzed the disinfection power of hydrogen peroxide, quaternary ammonium compounds, alcohols, phenols and aldehydes used as active principles according to international guidelines. The antimicrobial properties were assessed by broth microdilution, and antibiofilm properties against Escherichia coli ( E. coli ) and Staphylococcus aureus ( S. aureus ); their virucidal efficacy was tested against Herpes simplex virus type 1 (HSV-1) and Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The quaternary ammonium compounds demonstrated better efficacy than others and in some cases ready to use products had also virucidal and antimicrobial activities after dilution at 0.125%. The scientific evidence indicates that many commercial products are used at high concentrations and high doses and this could have deleterious effects both on human health and the environment. A lower concentration of active ingredients would avoid the excessive release of chemicals into the environment and improve skin tolerance, ensuring the health and safety protection of workers, including the healthcare operators at their workplace.

In this paper, we analysed the efflorescences present in the frescos of a monumental complex named S. Pietro a Corte situated in the historic centre of Salerno (Campania, Italy). The groundwater of the historic centre is fed by two important streams (the Rafastia and the Fusandola) that can be the sources of water penetration. The aims of this work are to (i) identify the stream that reaches the ancient frigidarium of S. Pietro a Corte and (ii) characterize the efflorescences on damaged frescos in terms of chemical nature and sources. In order to accomplish the first aim, the water of the Rafastia river (7 samples) and the water of the Fusandola river (7 samples) were analysed and compared with the water of a well of the Church (7 samples). The ionic chromatography measurements on the water samples allowed us to identify the Rafastia as the river that feeds the ancient frigidarium of S. Pietro a Corte . To investigate the nature and the origin of the efflorescences (our second aim), anionic chromatography analyses, X-ray diffraction measurements, and the isotopic determination of nitrogen were performed on the efflorescences (9 samples) and the salts recovered from the well (6 samples) . Results of these analyses show that efflorescences are mainly made of potassium nitrate with a δ 15 N value of + 9.3 ± 0.2‰. Consequently, a plausible explanation for their formation could be the permeation of sewage water on the walls of the monumental complex.

In this study, we evaluated indoor air quality to highlight the effects of environmental pollution in the field of cultural heritage. In particular, two important archeological places in the old part of the city of Salerno, Italy, were analyzed: Fruscione Palace and S. Pietro a Corte . The work focused on the influence of tourists on environmental pollution correlated to indoor air quality during some social and cultural events. Moreover, we focused on the possible use of the carbon isotopic composition of CO 2 as a tool for environmental studies in the field of cultural heritage. The results showed a good relationship between the isotopic composition of CO 2 and the variation of pollutants concentration in the air, demonstrating that it is a valid tool and non-invasive marker to monitor environmental pollution of museums and cultural heritage sites.

The most important parameter to obtain an appropriate preservation condition of museum environments concerns the indoor air quality. The exposure of artwork and materials to gaseous and particulate pollutants introduced by visitors and either indoor or outdoor sources contributes to their decay. In this work, we evaluated the possible monitoring of the visitors’ influence using the stable carbon isotopic ratio of CO 2 and the concentration of NH 3 as a real-time tool. The study was done in the Refectory of Santa Maria delle Grazie (Milan, Italy) which houses one of the most important paintings of Leonardo da Vinci, the Last Supper, and had more than 400,000 visitors in 2019. The results confirmed a good correlation between the presence of tourists inside the museum and the variation of δ 13 C value during the visits and the closure of the museum. The variation of indoor atmospheric δ 13 C was influenced by the presence of visitors in the Refectory and delineates the way done from the entrance to the exit. In the same way, the concentration of NH 3 was influenced by the presence of visitors and confirmed the role of this one on preservation methodology for indoor air quality in the museum. This new methodology can be used as a supplemental and non-invasive tool to help in calibrating microclimatic conditions through the ventilation rate and air filtration systems in the museum and to manage the number of visitors per turn.

Background and objectives: Ozone has been one of the most investigated and discussed sanitization methods. This paper reports a procedure to sanitize air hospital environments, in particular chirurgical surgery rooms that require high levels of disinfection. The purpose of this work was the development and implementation of a cleansing and sanitizing procedure for critical clinical settings with ozone, to prevent hospital infections by the elimination of all toxic and harmful microorganisms in the air, and ensure safe use for operators and patients. Materials and Methods: The protocol for the study involved a structured selection of a representative environment of healthcare structures such as high, medium, and low-risk settings in air and examples of hospital furniture. Results: The concentration of ozone was measured during sanitization treatment and the estimation of the total microbial count in the air and on different surfaces before and after the sanitization operations was performed. The results demonstrated a significant reduction in the microbial count that always fell below the threshold value. Conclusions: Currently, there are no air treatment strategies available for inactivating airborne organisms during hospital outbreaks, which is most probably due to the lack of approved protocols.