Explore the vast range of titles available.

We carried out density functional theory calculations to investigate the electronic and structural properties of linear carbon chains (carbynes) encapsulated in armchair and zigzag penta-graphene (PGNT) nanotubes. Results showed that PGNTs-wrapped carbyne can present negative formation energies that tend to stabilize that encapsulated carbon chains. These chains were stabilized in their cumulene and polyyne forms, with slight dependence on tube diameter. As a general trend, the PGNT band structures are kept almost unchanged upon carbyne encapsulation. This finding indicates weak orbital interactions between the PGNT and the carbyne. No net charge was found in chains encapsulated on zigzag PGNTs. Schematic representation of a carbyne encapsulated in a pentagraphene nanotube.

Novel two-dimensional materials have emerged as hybrid structures that combine graphene and hexagonal boron nitride (h-BN) domains. During their growth process, structural defects such as vacancies and change of atoms connectivity are unavoidable. In the present study, we use first-principle calculations to investigate the electronic structure of graphene domains endowed with a single carbon atom vacancy or Stone–Wales defects in h-BN sheets. The results show that both kinds of defects yield localized states within the bandgap. Alongside this change in the bandgap configuration, it occurs a splitting of the spin channels in such a way that electrons with up and down spins populate different energy levels above and below the Fermi level, respectively. Such a spin arrangement is associated to lattice magnetization. Stone–Wales defects solely point to the appearance of new intragap levels. These results demonstrated that vacancies could significantly affect the electronic properties of hybrid graphene/h-BN sheets. Graphical Abstract A Boron-Nitride sheet doped with a vacancy endowed Carbon domain

We systematically investigate, at density functional theory level, the electronic properties of a set of ten carotenoid molecules with different conjugation length. Ground state geometries were fully optimized using both B3LYP and its long-range corrected version, i.e., the CAM-B3LYP functional. The time-dependent DFT approach (TD-DFT) was also performed for the calculation of the excited states of the optimized geometries and the results were compared to the experimental ones, when available. Our findings indicate a dependence of the transition vertical energies, oscillator strengths, and transition dipole moments on the extension of conjugation, as expected. We also investigate the impact of the intra-molecular vibrations on the absorption spectrum by means of the Franck–Condon (FC) and nuclear ensemble (NE) approach to spectra simulation. Our simulations suggest that the Franck–Condon approximation may not be suitable to appropriately characterize the vibronic progression of these molecules, whereas the NE approach provides a contribution that vary from negligible to meaningful depending on which molecule and energy region is under analysis.

Context Nanoscrolls are tube-shaped structures formed when a sheet or ribbon of material is rolled into a cylinder, creating a hollow tube with a diameter on the nanoscale, similar to the papyrus. Carbon nanoscrolls have unique properties that make them useful in various applications, such as energy storage, catalysis, and drug delivery. In this study, we employed classical molecular dynamics simulations to investigate the formation and stability of nanoscrolls composed of graphene and hexagonal boron nitride (hBN) nanoribbons. Using a carbon nanotube (CNT) as a template to trigger their collapsing, we found that graphene/graphene, graphene/hBN, and hBN/hBN could form CNT-wrapped nanoscrolls at ultrafast speeds. We also confirmed that these nanoscrolls are thermally stable and discussed the other products formed from the interaction of these complexes and their temperature dependence. Gr/Gr and hBN/Gr nanoscrolls exhibit similar interlayer distances, while hBN/hBN nanoscrolls have wider interlayer distances than the other two composite nanoscrolls. These features suggest that hBN/hBN composite nanoscrolls could more efficiently capture small molecules because of their greater interlayer spacing. Methods We conducted molecular dynamics simulations using the Forcite package in the Biovia Materials Studio software, which employs the Universal and Dreiding force fields. We considered an NVT ensemble with a fixed time step of 1.0 fs for a duration of 500 ps. The velocity Verlet algorithm was adopted to integrate the equations of motion of the entire system. We employed the Nosé-Hoover-Langevin thermostat to control the system temperature. The simulations were carried out without periodic boundary conditions, so there was no pressure coupling.

Graphene nanoribbons (GNRs) are two-dimensional structures with a rich variety of electronic properties that derive from their semiconducting band gaps. In these materials, charge transport can occur via a hopping process mediated by carriers formed by self-interacting states between the excess charge and local lattice deformations. Here, we use a two-dimensional tight-binding approach to reveal the formation of bipolarons in GNRs. Our results show that the formed bipolarons are dynamically stable even for high electric field strengths when it comes to GNRs. Remarkably, the bipolaron dynamics can occur in acoustic and optical regimes concerning its saturation velocity. The phase transition between these two regimes takes place for a critical field strength in which the bipolaron moves roughly with the speed of sound in the material.

Carbon-based materials have garnered significant attention since the groundbreaking synthesis of graphene. The exploration of novel 2D carbon allotropes has led to the discovery of materials with intrinsic properties distinct from graphene. Within this context, the biphenylene network (BPN) was successfully synthesized. In this study, we used molecular dynamics (MD) simulations with the Reactive Force Field (ReaxFF) to delve into the thermomechanical properties and fracture patterns of biphenylene-based nanotubes (BPN-NTs) exhibiting armchair (AC-BPN-NT) and zigzag (ZZ-BPN-NT) chiralities. Throughout the longitudinal deformation process, we observed significant morphological transformations preceding the structural fracture of the system. These transformations unfolded in distinct inelastic phases. In both cases, AC- and ZZ-BPN-NT, stress accumulation in four-membered rings led to the creation of octagonal structures; however, in AC, this occurs in the fracture region, subsequently causing the presence of nanopores. On the other hand, for ZZ-BPN-NT, stress accumulation in the rectangular rings occurred in bonds parallel to the deformation, with elongated octagonal structures. The Young’s modulus of these nanotubes ranged from 746 to 1259 GPa, with a melting point of around 4000 K. Our results also explore the influence of diameter and curvature, drawing comparisons with BPN monolayers.

Studies on Poly(p-Phenylene Vinylene) (PPV) and derivatives have experienced enormous growth since they were successfully used to fabricate the first efficient prototypes of Polymer Light-Emitting Diodes in the 90s. Despite this rapid progress, understanding the relationship between charge transport and the morphology in these materials remains a challenge. Here, we shed light on the understanding of the transport mechanism of polarons and bipolarons in PPVs by developing a two-dimensional tight-binding approach that includes lattice relaxation effects. Remarkably, the results show that the PPV lattice loses the energy related to its conjugation during time by transferring this amount of energy to electrons. Such a process for energy transfer permits the quasiparticles to overcome the potential barrier imposed by the local lattice deformations, that are formed in the presence of an additional charge and, consequently, their electric field assisted transport takes place. Within the framework of this transport mechanism, a better insight into the origin of the carrier mobility in PPV and derivatives can be achieved and would be a useful guide for improving their chemical structures and morphologies.

Graphene nanoribbons are 2D hexagonal lattices with semiconducting band gaps. Below a critical electric field strength, the charge transport in these materials is governed by the quasiparticle mechanism. The quasiparticles involved in the process, known as polarons and bipolarons, are self-interacting states between the system charges and local lattice distortions. To deeply understand the charge transport mechanism in graphene nanoribbons, the study of the stability conditions for quasiparticles in these materials is crucial and may guide new investigations to improve the efficiency for a next generation of graphene-based optoelectronic devices. Here, we use a two-dimensional version of the Su–Schrieffer–Heeger model to investigate the stability of bipolarons in armchair graphene nanoribbons (AGNRs). Our findings show how bipolaron stability is dependent on the strength of the electron–phonon interactions. Moreover, the results show that bipolarons are dynamically stable in AGNRs for electric field strengths lower than 3.0 mV/Å. Remarkably, the system’s binding energy for a lattice containing a bipolaron is smaller than the formation energy of two isolated polarons, which suggests that bipolarons can be natural quasiparticle solutions in AGNRs. Graphical Abstract Charge localization of bipolarons in armchair garphene nanoribbons

Decision-making is a fundamental challenge in science and engineering, mainly when subjective factors influence the process. This paper introduces a decision support model based on the Analytic Hierarchy Process (AHP) that was specifically adapted for binary decisions and we term Binary AHP. The model facilitates structured decision-making when evaluating two opposing alternatives, such as yes/no scenarios. To demonstrate its applicability, we applied the Binary AHP model to a real-world case in the Brazilian public sector, where agencies must determine whether a technological solution qualifies as an Information and Communication Technology (ICT) solution. This classification is crucial since it directly impacts procurement policies and regulatory compliance. Our results show that Binary AHP enhanced the decision consistency, transparency, and reproducibility, and reduced the subjective discrepancies between the evaluators. Additionally, by inverting the priority vectors, the model allowed for a comparative analysis of both decision alternatives, thus offering more profound insights into the classification process. This study highlights the flexibility of AHP-based decision support methodologies and proposes a structured approach to refining binary decision frameworks in complex, multi-criteria environments.

We carried out fully-atomistic reactive molecular dynamics simulations to study the elastic properties and fracture patterns of transition metal dichalcogenide (TMD) MoX2 (X = S, Se, Te) membranes, in their 2H and 1T phases, within the framework of the Stillinger–Weber potential. Results showed that the fracture mechanism of these membranes occurs through a fast crack propagation followed by their abrupt rupture into moieties. As a general trend, the translated arrangement of the chalcogen atoms in the 1T phase contributes to diminishing their structural stability when contrasted with the 2H one. Among the TMDs studied here, 2H-MoSe2 has a higher tensile strength (25.98 GPa).