Explore the vast range of titles available.

We investigated the effect of femtosecond (fs) laser ablation of enamel and dentin for different pulse wavelengths: infrared (1030 nm), green (515 nm), and ultra-violet (343 nm) and for different pulse separations to determine the optimal irradiation conditions for the precise removal of dental hard tissues with the absence of structural and compositional damage. The ablation rates and efficiencies were established for all three laser wavelengths for both enamel and dentin at room temperature without using any irrigation or cooling system, and the surfaces were assessed with optical and scanning electron microscopy, optical profilometry, and Raman spectroscopy. We demonstrated that 515 nm fs irradiation provides the highest rate and efficiency for ablation, followed by infrared. Finally, we explored the temperature variations inside the dental pulp during the laser procedures for all three wavelengths and showed that the maximum increase at the optimum conditions for both infrared and green irradiations was 5.5 °C, within the acceptable limit of temperature increase during conventional dental treatments. Ultra-violet irradiation significantly increased the internal temperature of the teeth, well above the acceptable limit, and caused severe damage to tooth structures. Thus, ultra-violet is not a compatible laser wavelength for femtosecond teeth ablation.

Recent research and development into the formation of nanoscale channels as a central component of nanofluidic biochip systems revolutionized the biological and chemical fields. Exploration of new pathways to form nanochannels is increasingly necessary to provide a new generation of analytical tools with accurate control of liquid fluid flow, high selectivity and increased mass flow rate. Here, we demonstrate that a single 9-keV pulse from X-ray free-electron-laser can form a nanoscale mm-long cavity in LiF. The laser-generated shock pressure results in channel formation with >1,000 length-to-diameter aspect ratio. The development of void is analyzed via continuum and atomistic simulations revealing a sequence of processes leading to the final long cavity structure. This work presents the study of mm-long nanochannel formation by a single high-brilliance X-ray free-electron laser pulse. With MHz repetition rate X-ray free electron laser opens a new avenue for the development of lab-on-chip applications in any material, including those non-transparent to optical lasers. A single ultrashort pulse from X-ray free-electron laser is shown to produce a submicron, with >1,000 length-to-diameter aspect ratio long channel in solid material. The results open a new avenue for development of artificial nanofluidic devices with confinement down to the molecular level.

We explore femtosecond laser cleaning of materials used in the construction of historic monuments, such as stone and steel covered in typical contaminants caused by harsh environments that may be found in urban areas. We address the cleaning of these materials from a conservation perspective, taking as examples the preservation and cleaning of iconic structures such as the steel and the granite of the Sydney Harbour Bridge, Hawkesbury sandstone, a popular building material of a variety of monuments in Sydney (Australia), Makrana marble taken from the Soami Bagh Samadh temple of Agra in India, and also graffiti removal. We demonstrate that femtosecond laser pulses can clean a range of different contaminants such as biofilm, environmental soiling, rust, and spray paints, while preserving the integrity of the underlying substrates. Femtosecond laser cleaning is a fast and effective method and a safer alternative to lasers with longer pulse durations for the preservation of historic monuments.

Liquid microjets are a common means of delivering protein crystals to the focus of X-ray free-electron lasers (FELs) for serial femtosecond crystallography measurements. The high X-ray intensity in the focus initiates an explosion of the microjet and sample. With the advent of X-ray FELs with megahertz rates, the typical velocities of these jets must be increased significantly in order to replenish the damaged material in time for the subsequent measurement with the next X-ray pulse. This work reports the results of a megahertz serial diffraction experiment at the FLASH FEL facility using 4.3 nm radiation. The operation of gas-dynamic nozzles that produce liquid microjets with velocities greater than 80 m s −1 was demonstrated. Furthermore, this article provides optical images of X-ray-induced explosions together with Bragg diffraction from protein microcrystals exposed to trains of X-ray pulses repeating at rates of up to 4.5 MHz. The results indicate the feasibility for megahertz serial crystallography measurements with hard X-rays and give guidance for the design of such experiments.

At extreme pressures and temperatures, such as those inside planets and stars, common materials form new dense phases with compacted atomic arrangements and unusual physical properties. The synthesis and study of new phases of matter at pressures above 100 GPa and temperatures above 10 4 K—warm dense matter—may reveal the functional details of planet and star interiors, and may lead to materials with extraordinary properties. Many phases have been predicted theoretically that may be realized once appropriate formation conditions are found. Here we report the synthesis of a superdense stable phase of body-centred-cubic aluminium, predicted by first-principles theories to exist at pressures above 380 GPa. The superdense Al phase was synthesized in the non-equilibrium conditions of an ultrafast laser-induced microexplosion confined inside sapphire ( α -Al 2 O 3 ). Confined microexplosions offer a strategy to create and recover high-density polymorphs, and a simple method for tabletop study of warm dense matter. At extreme temperature and pressure, materials can form new dense phases with unusual physical properties. Here, laser-induced microexplosions are used to produce a superdense, stable, body-centred-cubic form of aluminium, which was previously predicted to exist at pressures above 380GPa.

It was demonstrated during the past decade that an ultra-short intense laser pulse tightly-focused deep inside a transparent dielectric generates an energy density in excess of several MJ/cm3. Such an energy concentration with extremely high heating and fast quenching rates leads to unusual solid-plasma-solid transformation paths, overcoming kinetic barriers to the formation of previously unknown high-pressure material phases, which are preserved in the surrounding pristine crystal. These results were obtained with a pulse of a Gaussian shape in space and in time. Recently, it has been shown that the Bessel-shaped pulse could transform a much larger amount of material and allegedly create even higher energy density than what was achieved with the Gaussian beam (GB) pulses. Here, we present a succinct review of previous results and discuss the possible routes for achieving higher energy density employing the Bessel beam (BB) pulses and take advantage of their unique properties.

Ultrashort laser pulses tightly focused inside a transparent material present an example of laser interaction with matter where all the laser-affected material remains inside the bulk, thus the mass is conserved. In this paper, we present the case where the high intensity of a laser pulse is above the threshold for optical breakdown, and the material is ionised in the focal area. We consider in detail a special case where a micro-explosion is formed at the boundary of a silicon surface buried under a 10-micron-thick oxidised layer, providing the opportunity to affect the silicon crystal by a strong shock wave and creating new material phases from the plasma state. We summarise the main conclusions on ultrafast laser-induced material modifications in confined geometry and discuss the prospects of confined micro-explosion for forming new silicon phases.

We study experimentally the formation of refractive index voxels (volume elements) in photorefractive LiNbO 3 and LiTaO 3 crystals illuminated with high irradiance femtosecond laser pulses. We used 150 fs pulses at 800 nm wavelength (energy 6–50 nJ) tightly focused inside the crystals in a single shot regime. This resulted in a formation of a micrometer size region of elevated refractive index, which may be used as memory bits in information storage/retrieval application. The maximum refractive index change of 5×10 −4 was recorded in undoped LiNbO 3 at an average light intensity of ∼TW/cm 2 that is close to the breakdown threshold. A simple setup for photorefractive recording and in situ monitoring of the refractive index changes has been proposed.

At extreme pressures and temperatures, such as those inside planets and stars, common materials form new dense phases with compacted atomic arrangements and unusual physical properties. The synthesis and study of new phases of matter at pressures above 100 GPa and temperatures above 104 K—warm dense matter—may reveal the functional details of planet and star interiors, and may lead to materials with extraordinary properties. Many phases have been predicted theoretically that may be realized once appropriate formation conditions are found. Here we report the synthesis of a superdense stable phase of body-centred-cubic aluminium, predicted by first-principles theories to exist at pressures above 380 GPa. The superdense Al phase was synthesized in the non-equilibrium conditions of an ultrafast laser-induced microexplosion confined inside sapphire (α-Al₂O₃). Confined microexplosions offer a strategy to create and recover high-density polymorphs, and a simple method for tabletop study of warm dense matter.