Explore the vast range of titles available.

In this systematic survey, an overview of non-conventional actuators particularly used in soft-robotics is presented. The review is performed by using well-defined performance criteria with a direction to identify the exemplary and potential applications. In addition to this, initial guidelines to compare the performance and applicability of these novel actuators are provided. The meta-analysis is restricted to five main types of actuators: shape memory alloys (SMAs), fluidic elastomer actuators (FEAs), shape morphing polymers (SMPs), dielectric electro-activated polymers (DEAPs), and magnetic/electro-magnetic actuators (E/MAs). In exploring and comparing the capabilities of these actuators, the focus was on eight different aspects: compliance, topology-geometry, scalability-complexity, energy efficiency, operation range, modality, controllability, and technological readiness level (TRL). The overview presented here provides a state-of-the-art summary of the advancements and can help researchers to select the most convenient soft actuators using the comprehensive comparison of the suggested quantitative and qualitative criteria.

SpineMan is designed as a prototype of a soft robotic manipulator that is constructed of alternating hard and soft segments similar to the human spine. Implementing such soft segments allows to surpass the rigidity of conventional robots and ensures safer workspaces where humans and machines can work side by side with less stringent safety restrictions. Therefore, we used a hydrogel as viscoelastic material consisting of poly(vinyl alcohol) and borax. The mechanical properties of the hydrogel were tailored by embedding silica particles of various particles sizes as well as in different mass fractions. Increased mass contents as well as larger particle sizes led to strongly enhanced rigidity with a more than doubled storage modulus of the composite compared to the pure hydrogel. Furthermore, specific functionalities were induced by the incorporation of superparamagnetic Fe3O4 nanoparticles that can in principle be used for sensing robotic motion and detecting malfunctions. Therefore, we precisely adjusted the saturation magnetization of the soft segments using defined mass contents of the nanoparticles. To ensure long-time shape stability and prevention of atmospheric influences on the prepared composites, a silicone skin of specific shore hardness was used. The composites and the soft segments were characterized by oscillation measurements, cryo-SEM, bending tests and SQUID measurements, which give insights into the properties in the passive and in the moving state of SpineMan. The utilization of tailored composites led to highly flexible, reinforced and functional soft segments, which ensure stability, easy movability by springs of the shape memory alloy nitinol and prevention of total failure.

Omnidirectional mobile robots offer interesting features for industrial and service applications, in particular, when operating in tight spaces. Compared to car-like nonholonomic vehicles, they provide a higher degree of maneuverability, and often require less complex path planning and control schemes. Three different types of holonomic wheels that enable omnidirectional motion have been proposed in literature: universal, Mecanum, and ball wheel mechanisms. A problem commonly associated with the first two wheel types is that they induce vibrations in the system due to the discontinuous contact points. In this article, a ball wheel mechanism with superior features including slip measurement, free-wheel modus and attrition sensing is presented. The first prototype was built using additive manufacturing. The requirements for the design and possible improvements for future versions are discussed. Based on the presented ball wheel drive, a design for an omnidirectional mobile robot platform driven by three redundant ball wheel units is proposed. The velocity kinematic model of this mobile base is also addressed. Moreover, motion planning for an individual ball drive is demonstrated by means of an online trajectory generation scheme. The pseudocode of the trajectory planning algorithm implemented in LabVIEW is then presented. Finally, the motion characteristics of the ball drive mechanism are tested and its functionality is evaluated in detail. Measurements obtained from these tests show that the slip between the ball wheel and the ground can be estimated quite accurately. Hence, it is expected that these improved dead-reckoning estimates will result in a higher positioning accuracy of the final base.

Omnidirectional mobile robots offer interesting features for industrial and service applications, in particular, when operating in tight spaces. Compared to car-like nonholonomic vehicles, they provide a higher degree of maneuverability, and often require less complex path planning and control schemes. Three different types of holonomic wheels that enable omnidirectional motion have been proposed in literature: universal, Mecanum, and ball wheel mechanisms. A problem commonly associated with the first two wheel types is that they induce vibrations in the system due to the discontinuous contact points. In this article, a ball wheel mechanism with superior features including slip measurement, free-wheel modus and attrition sensing is presented. The first prototype was built using additive manufacturing. The requirements for the design and possible improvements for future versions are discussed. Based on the presented ball wheel drive, a design for an omnidirectional mobile robot platform driven by three redundant ball wheel units is proposed. The velocity kinematic model of this mobile base is also addressed. Moreover, motion planning for an individual ball drive is demonstrated by means of an online trajectory generation scheme. The pseudocode of the trajectory planning algorithm implemented in LabVIEW is then presented. Finally, the motion characteristics of the ball drive mechanism are tested and its functionality is evaluated in detail. Measurements obtained from these tests show that the slip between the ball wheel and the ground can be estimated quite accurately. Hence, it is expected that these improved dead-reckoning estimates will result in a higher positioning accuracy of the final base.