Explore the vast range of titles available.

Nanoparticles assemble at the interface between two fluids into disordered, liquid-like arrays where the nanoparticles can diffuse laterally at the interface. Using nanoparticles dispersed in water and amine end-capped polymers in oil, nanoparticle surfactants are generated in situ at the interface overcoming the inherent weak forces governing the interfacial adsorption of nanoparticles. When the shape of the liquid domain is deformed by an external field, the surface area increases and more nanoparticles adsorb to the interface. Upon releasing the field, the interfacial area decreases, jamming the nanoparticle surfactants and arresting further shape change. The jammed nanoparticles remain disordered and liquid-like, enabling multiple, consecutive deformation and jamming events. Further stabilization is realized by replacing monofunctional ligands with difunctional versions that cross-link the assemblies. The ability to generate and stabilize liquids with a prescribed shape poses opportunities for reactive liquid systems, packaging, delivery, and storage.

The chemical structure of donors and acceptors limit the power conversion efficiencies achievable with active layers of binary donor-acceptor mixtures. Here, using quaternary blends, double cascading energy level alignment in bulk heterojunction organic photovoltaic active layers are realized, enabling efficient carrier splitting and transport. Numerous avenues to optimize light absorption, carrier transport, and charge-transfer state energy levels are opened by the chemical constitution of the components. Record-breaking PCEs of 18.07% are achieved where, by electronic structure and morphology optimization, simultaneous improvements of the open-circuit voltage, short-circuit current and fill factor occur. The donor and acceptor chemical structures afford control over electronic structure and charge-transfer state energy levels, enabling manipulation of hole-transfer rates, carrier transport, and non-radiative recombination losses. Efficiency of organic solar cells is determined by the physical properties of donors and acceptors in bulk heterojunction film. The authors optimise quaternary blends to realize a double cascading energy level alignment enabling efficient carrier dissociation and transport, achieving 18% efficiency.

The performance of perovskite photovoltaics is fundamentally impeded by the presence of undesirable defects that contribute to non-radiative losses within the devices. Although mitigating these losses has been extensively reported by numerous passivation strategies, a detailed understanding of loss origins within the devices remains elusive. Here, we demonstrate that the defect capturing probability estimated by the capture cross-section is decreased by varying the dielectric response, producing the dielectric screening effect in the perovskite. The resulting perovskites also show reduced surface recombination and a weaker electron-phonon coupling. All of these boost the power conversion efficiency to 22.3% for an inverted perovskite photovoltaic device with a high open-circuit voltage of 1.25 V and a low voltage deficit of 0.37 V (a bandgap ~1.62 eV). Our results provide not only an in-depth understanding of the carrier capture processes in perovskites, but also a promising pathway for realizing highly efficient devices via dielectric regulation. Performance of perovskite photovoltaics is greatly affected by undesirable defects that contribute to non-radiative losses. Here, the authors mitigate these losses by doping perovskite with KI to alter the dielectric response, thus defect capturing probability, resulting in inverted device with PCE of 22.3% and low voltage loss.

A major challenge in organic solar cell design is the trade-off between oxidative stability and work function of the metal cathode. We found that in single-junction polymer solar cells, this problem can be surmounted by solution-based incorporation of fulleropyrrolidines with amine (C60-N) or zwitterionic (C60-SB) substituents as cathode-independent buffer layers. Specifically, a thin layer of C60-N reduced the effective work function of Ag, Cu, and Au electrodes to 3.65 electron volts. Power conversion efficiency values exceeding 8.5% were obtained for organic photovoltaics independent of the cathode selection (Al, Ag, Cu, or Au). Such high efficiencies did not require precise control over interlayer thickness, as devices prepared with C60-N and C60-SB layers ranging from 5 to 55 nanometers performed with high efficiency.

Systems comprised of immiscible liquids held in non-equilibrium shapes by the interfacial assembly and jamming of nanoparticle−polymer surfactants have significant potential to advance catalysis, chemical separations, energy storage and conversion. Spatially directing functionality within them and coupling processes in both phases remains a challenge. Here, we exploit nanoclay−polymer surfactant assemblies at an oil−water interface to produce a semi-permeable membrane between the liquids, and from them all-liquid fluidic devices with bespoke properties. Flow channels are fabricated using micropatterned 2D substrates and liquid-in-liquid 3D printing. The anionic walls of the device can be functionalized with cationic small molecules, enzymes, and colloidal nanocrystal catalysts. Multi-step chemical transformations can be conducted within the channels under flow, as can selective mass transport across the liquid−liquid interface for in-line separations. These all-liquid systems become automated using pumps, detectors, and control systems, revealing a latent ability for chemical logic and learning. Non-equilibrium systems of immiscible liquids have significant potential to advance different technologies, but control over morphology or functionality remains unexplored. Here, the authors demonstrate an all-liquid fluidic device by exploiting surfactant assemblies to produce a semi-permeable membrane between the liquids.

Solid ferromagnetic materials are rigid in shape and cannot be reconfigured. Ferrofluids, although reconfigurable, are paramagnetic at room temperature and lose their magnetization when the applied magnetic field is removed. Here, we show a reversible paramagnetic-to-ferromagnetic transformation of ferrofluid droplets by the jamming of a monolayer of magnetic nanoparticles assembled at the water-oil interface. These ferromagnetic liquid droplets exhibit a finite coercivity and remanent magnetization. They can be easily reconfigured into different shapes while preserving themagnetic properties of solid ferromagnets with classic north-south dipole interactions. Their translational and rotational motions can be actuated remotely and precisely by an external magnetic field, inspiring studies on active matter, energy-dissipative assemblies, and programmable liquid constructs.

The mixing of polymers and nanoparticles is opening pathways for engineering flexible composites that exhibit advantageous electrical, optical, or mechanical properties. Recent advances reveal routes to exploit both enthalpic and entropic interactions so as to direct the spatial distribution of nanoparticles and thereby control the macroscopic performance of the material. For example, by tailoring the particle coating and size, researchers have created self-healing materials for improved sustainability and self-corralling rods for photovoltaic applications. A challenge for future studies is to create hierarchically structured composites in which each sublayer contributes a distinct function to yield a mechanically integrated, multifunctional material.

Droplet networks stabilized by lipid interfacial bilayers or colloidal particles have been extensively investigated in recent years and are of great interest for compartmentalized reactions and biological functions. However, current design strategies are disadvantaged by complex preparations and limited droplet size. Here, by using the assembly and jamming of cucurbit[8]uril surfactants at the oil-water interface, we show a novel means of preparing droplet networks that are multi-responsive, reconfigurable, and internally connected over macroscopic distances. Openings between the droplets enable the exchange of matter, affording a platform for chemical reactions and material synthesis. Our work requires only a manual compression to construct complex patterns of droplet networks, underscoring the simplicity of this strategy and the range of potential applications. Earlier methods for droplet network stabilization require extremely precise control and manipulation with considerable energy consumption, making them difficult to implement. Here, the authors present 2D interfacial networks, formed by irreversible interfacial interactions between polymer chains dissolved in one liquid and ligands dissolved in a second immiscible liquid at random points along the chains.

Hybrid lead halide perovskites have emerged as high-performance photovoltaic materials with their extraordinary optoelectronic properties. In particular, the remarkable device efficiency is strongly influenced by the perovskite crystallinity and the film morphology. Here, we investigate the perovskites crystallisation kinetics and growth mechanism in real time from liquid precursor continually to the final uniform film. We utilize some advanced in situ characterisation techniques including synchrotron-based grazing incident X-ray diffraction to observe crystal structure and chemical transition of perovskites. The nano-assemble model from perovskite intermediated [PbI 6 ] 4− cage nanoparticles to bulk polycrystals is proposed to understand perovskites formation at a molecular- or nano-level. A crystallisation-depletion mechanism is developed to elucidate the periodic crystallisation and the kinetically trapped morphology at a mesoscopic level. Based on these in situ dynamics studies, the whole process of the perovskites formation and transformation from the molecular to the microstructure over relevant temperature and time scales is successfully demonstrated. The photovoltaic performances of perovskite materials are strongly influenced by their crystallinity and film morphology. Here, the authors investigate the formation and morphology evolution mechanisms of lead halide perovskites and reveal that bulk polycrystals grow from intermediate [PbI6] 4 − cage nanoparticles.

Janus structures have unique properties due to their distinct functionalities on opposing faces, but have yet to be realized with flowing liquids. We demonstrate such Janus liquids with a customizable distribution of nanoparticles (NPs) throughout their structures by joining two aqueous streams of NP dispersions in an apolar liquid. Using this anisotropic integration platform, different magnetic, conductive, or non-responsive NPs can be spatially confined to opposite sides of the original interface using magnetic graphene oxide (mGO)/GO, Ti 3 C 2 T x /GO, or GO suspensions. The resultant Janus liquids can be used as templates for versatile, responsive, and mechanically robust aerogels suitable for piezoresistive sensing, human motion monitoring, and electromagnetic interference (EMI) shielding with a tuned absorption mechanism. The EMI shields outperform their current counterparts in terms of wave absorption, i.e., SE T  ≈ 51 dB, SE R  ≈ 0.4 dB, and A = 0.91, due to their high porosity ranging from micro- to macro-scales along with non-interfering magnetic and conductive networks imparted by the Janus architecture. A combination of functional nanoparticles and liquid streaming can be used to generate structures for the fabrication of soft functional materials. In this study, authors demonstrate the creation of Janus-structured liquids with anisotropic and programmable distributions of nanoparticles by utilizing interfacial assembly and jamming of nanoparticles at the liquid-liquid interface.