Explore the vast range of titles available.

A detailed understanding of the different mechanisms being responsible for terahertz (THz) emission in ferromagnetic (FM) materials will aid in designing efficient THz emitters. In this report, we present direct evidence of THz emission from single layer Co 0.4 Fe 0.4 B 0.2 (CoFeB) FM thin films. The dominant mechanism being responsible for the THz emission is the anomalous Hall effect (AHE), which is an effect of a net backflow current in the FM layer created by the spin polarized current reflected at the interfaces of the FM layer. The THz emission from the AHE-based CoFeB emitter is optimized by varying its thickness, orientation, and pump fluence of the laser beam. Results from electrical transport measurements show that skew scattering of charge carriers is responsible for the THz emission in the CoFeB AHE-based THz emitter.

Medicinal plant trade is important for local livelihoods. However, many medicinal plants are difficult to identify when they are sold as roots, powders or bark. DNA barcoding involves using a short, agreed-upon region of a genome as a unique identifier for species- ideally, as a global standard. What is the functionality, efficacy and accuracy of the use of barcoding for identifying root material, using medicinal plant roots sold by herbalists in Marrakech, Morocco, as a test dataset. In total, 111 root samples were sequenced for four proposed barcode regions rpoC1, psbA-trnH, matK and ITS. Sequences were searched against a tailored reference database of Moroccan medicinal plants and their closest relatives using BLAST and Blastclust, and through inference of RAxML phylograms of the aligned market and reference samples. Sequencing success was high for rpoC1, psbA-trnH, and ITS, but low for matK. Searches using rpoC1 alone resulted in a number of ambiguous identifications, indicating insufficient DNA variation for accurate species-level identification. Combining rpoC1, psbA-trnH and ITS allowed the majority of the market samples to be identified to genus level. For a minority of the market samples, the barcoding identification differed significantly from previous hypotheses based on the vernacular names. Endemic plant species are commercialized in Marrakech. Adulteration is common and this may indicate that the products are becoming locally endangered. Nevertheless the majority of the traded roots belong to species that are common and not known to be endangered. A significant conclusion from our results is that unknown samples are more difficult to identify than earlier suggested, especially if the reference sequences were obtained from different populations. A global barcoding database should therefore contain sequences from different populations of the same species to assure the reference sequences characterize the species throughout its distributional range.

The human body can act as a medium for the transmission of electromagnetic waves in the wireless body sensor networks context. However, there are transmission losses in biological tissues due to the presence of water and salts. This Letter focuses on lateral intra-body microwave communication through different biological tissue layers and demonstrates the effect of the tissue thicknesses by comparing signal coupling in the channel. For this work, the authors utilise the R-band frequencies since it overlaps the industrial, scientific and medical radio (ISM) band. The channel model in human tissues is proposed based on electromagnetic simulations, validated using equivalent phantom and ex-vivo measurements. The phantom and ex-vivo measurements are compared with simulation modelling. The results show that electromagnetic communication is feasible in the adipose tissue layer with a low attenuation of ∼2 dB per 20 mm for phantom measurements and 4 dB per 20 mm for ex-vivo measurements at 2 GHz. Since the dielectric losses of human adipose tissues are almost half of ex-vivo tissue, an attenuation of around 3 dB per 20 mm is expected. The results show that human adipose tissue can be used as an intra-body communication channel.

Silicon tracking detectors operated at high luminosity collider experiments pose a challenge for current and future readout systems regarding bandwidth, radiation, space and power constraints. With the latest developments in wireless communications, wireless readout systems might be an attractive alternative to commonly used wired optical and copper based readout architectures. The WADAPT group (Wireless Allowing Data and Power Transmission) has been formed to study the feasibility of wireless data transmission for future tracking detectors. These proceedings cover current developments focused on communication in the 60 GHz band. This frequency band offers a high bandwidth, a small form factor and an already mature technology. Motivation for wireless data transmission for high energy physics application and the developments towards a demonstrator prototype are summarized. Feasibility studies concerning the construction and operation of a wireless transceiver system have been performed. Data transmission tests with a transceiver prototype operating at even higher frequencies in the 240 GHz band are described. Data transmission at rates up to 10 Gb/s have been obtained successfully using binary phase shift keying.

In open-ended coaxial dielectric characterisation techniques, intermediate liquid standards between air and water are necessary for precise dielectric measurements of biological samples. Calibration standards with dielectric permittivities much different from those of the measured samples will produce unreliable results. Different intermediate calibration standards are prepared and measurement results are presented. The aim is to obtain various permittivity values between 10 and 80 by diluting methanol and ethanol with distilled water. This technique can also be used for assessing the purity of alcohols.

Different lengths of WR3 (220–330 GHz) and WR10 (75–110 GHz) waveguides are fabricated through direct metal laser sintering (DMLS). The losses in these waveguides are measured and modelled using the Huray surface roughness model. The losses in WR3 are around 0.3 dB/mm and in WR10 0.05 dB/mm. The Huray equation model is accounting relatively good for the attenuation in the WR10 waveguide but deviates more in the WR3 waveguide. The model is compared to finite element simulations of the losses assuming an approximate surface structure similar to the resulting one from the DMLS process.

A conformal antenna structure based on dual triangular patches is presented. The dual antennas are designed to be used in diversity based sensor node applications and are integrated in the enclosure of the node. The internal shielded enclosure houses the required electronics and power supply. Simulations and measurements show acceptable diversity performance and efficiency in the second resonance mode.

A compact 10 kW RF power amplifier at 352 MHz was developed at FREIA for the European Spallation Source, ESS. The specifications of ESS for the conception of amplifiers are related to its pulsed operation: 3.5 ms pulse length and a duty cycle of 5%. The realized amplifier is composed of eight kilowatt level modules, combined using a planar Gysel 8-way combiner. The combiner has a low insertion loss of only 0.2 dB, measured at 10 kW peak power. Each module is built around a commercially available LDMOS transistor in a singleended architecture. During the final tests, a total output peak power of 10.5 kW was measured.

Different types of bondwire interconnect for differential chip-to-antenna and single-ended chip-to-chip interfaces are investigated. Two differential compensation structures for various lengths of interconnects are designed and experimentally evaluated using dedicated transmit and receive radar modules operating across a 110–156 GHz band. Measurement results demonstrate that a fractional bandwidth of 7.5% and a minimum insertion loss of 0.2 dB can be achieved for differential interconnects as long as 0.8 mm. Design and measurement results of an extremely wideband low-loss single-ended chip-to-chip bondwire interconnect that features 1.5 dB bandwidth from DC to 170 GHz and insertion loss of less than 1 dB at 140 GHz are presented as well. The results show that the well-established wire-bonding techniques are still an attractive solution even beyond 100 GHz. Reproducibility and scalability of the proposed solutions are assessed as well.

Today, the majority of wagon failures on railroad systems are because of the poor maintenance of ball bearings, which causes emergent stops and delays. The existing stationary detectors, lack in predicting failures which cause troubles in scheduling maintenance. During the fall of 2011, a trial was performed by applying a wireless sensor network (WSN) aboard a train wagon with the objective to demonstrate a proof of concept for monitoring the temperature of ball bearings aboard the train wagon. This trial investigates several key aspects when applying sensor networks such as radio wave propagation, energy scavenging and performance of the WSN aboard the wagon. Two wireless links were used in the WSN. The aboard network communicates at 2.45 GHz, and the external communication is an 868 MHz radio frequency identification radio link. Since the energy in the WSN node is limited, appropriate energy scavenging devices are also presented and evaluated in a lab environment. Effort has been made to overcome these problems. The energy consumption in the network is still a problem; the most promising energy scavenging technique is piezoelectric harvesting by vibrations, which in the experiments scavenged 2.32 mW.