Explore the vast range of titles available.

The transition toward sustainable and decentralized energy solutions necessitates the development of innovative bioelectronic systems capable of harvesting and converting renewable energy. Here, we present a novel photo-bioelectrochemical fuel cell architecture based on a biohybrid anode integrating laser-induced graphene (LIG), poly(3,4-ethylenedioxythiophene) (PEDOT), and isolated thylakoid membranes. LIG provided a porous, conductive scaffold, while PEDOT enhanced electrode compatibility, electrical conductivity, and operational stability. Compared to MXene-based systems that involve complex, multi-step synthesis, PEDOT offers a cost-effective and scalable alternative for bioelectrode fabrication. Thylakoid membranes were immobilized onto the PEDOT-modified LIG surface to enable light-driven electron generation. Electrochemical characterization revealed enhanced redox activity following PEDOT modification and stable photocurrent generation under light illumination, achieving a photocurrent density of approximately 18 µA cm−2. The assembled photo-bioelectrochemical fuel cell employing a gas diffusion platinum cathode demonstrated an open-circuit voltage of 0.57 V and a peak power density of 36 µW cm−2 in 0.1 M citrate buffer (pH 5.5) under light conditions. Furthermore, the integration of a charge pump circuit successfully boosted the harvested voltage to drive a low-power light-emitting diode, showcasing the practical viability of the system. This work highlights the potential of combining biological photosystems with conductive nanomaterials for the development of self-powered, light-driven bioelectronic devices.

Triboelectric nanogenerators (TENGs) have emerged as versatile self-powered platforms for wearable and implantable biomedical sensing, offering an alternative to battery-dependent electronic devices. By converting biomechanical energy from physiological motion into electrical signals, TENGs enable simultaneous energy harvesting and active sensing within flexible, lightweight, and biocompatible architectures. This review summarizes recent advances from 2020 to 2025 in triboelectric nanogenerator (TENG)-based cardiovascular monitoring. The discussion focuses on material systems, device configurations, sensing mechanisms, and applications including pulse detection and cuffless blood pressure estimation. Representative studies are compared to highlight emerging trends in wearable and self-powered sensing technologies. However, differences in experimental conditions, anatomical sites, calibration methods, and signal-processing approaches limit direct comparison of reported performance. In addition, challenges such as subject-specific calibration, motion artifacts, and limited clinical validation remain. Overall, this review highlights current progress and outlines key challenges for future development and translation of TENG-based cardiovascular monitoring systems.

Thylakoid-based photosynthetic biofuel cells (TBFCs) harness the inherent light-driven electron transfer pathways of photosynthesis to enable sustainable solar-to-electrical energy conversion. While TBFCs offer a unique route toward biohybrid energy systems, their practical deployment is hindered by sluggish electron transfer kinetics, unstable redox mediators, and inefficient interfacing between biological and electrode components. This review critically examines recent advances in TBFCs, with a focus on three key surface engineering strategies: (i) incorporation of nanostructured materials to enhance electrode conductivity and surface area; (ii) application of redox mediators to facilitate charge transfer between photosynthetic proteins and electrodes; and (iii) functional exploitation of individual thylakoid components, including Photosystem I (PSI) and Photosystem II (PSII), to augment photogenerated current output. By systematically evaluating current advancements, this review highlights the synergistic role of materials and biological components in advancing TBFC technology and offers insights into next generation biohybrid solar energy systems with enhanced efficiency and scalability.

Thylakoid-Based Biofuel Cells (TBFCs) present significant potential as renewable power sources; however, their development is impeded by challenges including delicate thylakoid membranes, limited electron transport efficiency, stability and dependence on expensive mediators. This study aimed to address these challenges by fabricating a novel photo-driven bioanode through the integration of Laser-Induced Graphene (LIG), Nb4C3Tx MXene, and thylakoid membranes. The fabrication process involved laser engraving to generate porous LIG electrodes, followed by MXene drop casting and thylakoid immobilization to enhance electrochemical performance and surface area. Morphological characterization supported that MXene incorporation increased active sites and surface roughness, favorable for electrochemical reactions. Electrochemical analysis using cyclic voltammetry and electrochemical impedance spectroscopy revealed that the composite bioanode exhibited significantly reduced charge transfer resistance and improved redox kinetics compared to LIG electrodes. The electron transfer process was determined to be diffusion-controlled, indicating effective interaction between the electrolyte and electrode surface. Photoelectrochemical measurements illustrated enhanced photocurrent generation under illumination, confirming the bioanode capability for efficient light-driven electron transport. The photocurrent response was reproducible across multiple trials, indicating reliability and stability of the thylakoid integrated bioanode. Polarization and power density plot further validated improved energy conversion efficiency. The bioanode was successfully integrated into a complete TBFC with a gas diffusion platinum cathode to power a light emitting diode.

Background: The persisting Coronavirus disease 2019 (COVID-19) pandemic and limited vaccine supply has led to a shift in global health priorities to expand vaccine coverage. Relying on severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) molecular testing alone cannot reveal the infection proportion, which could play a critical role in vaccination prioritization. We evaluated the utility of a combination orthogonal serological testing (COST) algorithm alongside RT-PCR to quantify prevalence with the aim of identifying candidate patient clusters to receive single and/or delayed vaccination. Methods: We utilized 108,505 patients with suspected COVID-19 in a retrospective analysis of SARS-CoV-2 RT-PCR vs. IgG-nucleocapsid (IgGNC) antibody testing coverage in routine practice for the estimation of prevalence. Prospectively, an independent cohort of 21,388 subjects was simultaneously tested by SARS-CoV-2 RT-PCR and IgGNC to determine the prevalence. We used 614 prospective study subjects to assess the utility of COST (IgGNC, IgM-spike (IgMSP), and IgG-spike (IgGSP)) in establishing the infection proportion to identify a single-dose vaccination cohort. Results: Retrospectively, we observed a 6.3% (6871/108,505) positivity for SARS-CoV-2 RT-PCR, and only 2.3% (2533/108,505) of cases had paired IgGNC serology performed. Prospectively, IgGNC serology identified twice the number of COVID-positive cases in relation to RT-PCR alone. COST further increased the number of detected positive cases: IgGNC+ or IgMSP+ (18.0%); IgGNC+ or IgGSP+ (23.5%); IgMSP+ or IgGSP+ (23.8%); and IgGNC+ or IgMSP+ or IgGSP+ (141/584 = 24.1%). Conclusion: COST may be an effective tool for the evaluation of infection proportion and thus could define a cohort for a single dose and/or delayed vaccination.

Purpose: Citation analysis is frequently employed to assess the research output of individuals, departments, and institutions. Intra-country institutional analysis of bibliometric analysis is needed to formulate appropriate research policies. To assess the research output of dental colleges in Saudi Arabia Research design: An observational study was conducted for publications from Dental Colleges in Saudi Arabia using the SCOPUS database. The data for the years 2016-18 were retrieved for 18 dental colleges of the Kingdom of Saudi Arabia (KSA). Key findings: The highest publication productivity was reported for King Abdulaziz University- Faculty of Dentistry (Jeddah). The highest number of publications in the years 2016-18 was from Jazan University- College of Dentistry. The highest h index for 2016-18 was 8 for Imam Abdulrahman Bin Faisal University- College of Dentistry. The journal in which the most articles were published was the Journal of Contemporary Dental Practice. Conclusions/Implications: Jazan University- College of Dentistry, King Abdulaziz University- Faculty of Dentistry (Jeddah) and Imam Abdulrahman Bin Faisal University College of Dentistry are the leading dental institutions in the KSA regarding the number of papers published, the number of citations and the h index. The increased focus on research in institutions in Saudi Arabia is evidenced by the steady rise in their number of publications.

In India, the results of esophageal atresia and tracheo-esophageal fistula depend on many factors like birth weight, associated cardiac defects, underlying pneumonia, etc. to name a few.