Explore the vast range of titles available.

The structure-selective precise synthesis of carbon nanotubes (CNTs) has been long sought in materials science. The aromatic molecules corresponding to segment structures of CNTs, that is, carbon nanobelts (CNBs), are of interest as templates for CNT growth. Among the three types of CNB (armchair, chiral and zigzag CNBs), zigzag CNBs have been considered the most difficult type to synthesize. Here we report the synthesis, isolation and structural characterization of a zigzag CNB. The synthesis involves an iterative Diels–Alder reaction sequence followed by reductive aromatization of oxygen-bridged moieties. As predicted by theoretical calculations, this CNB was isolated as a stable compound. The structure of the zigzag CNB was fully characterized by X-ray crystallography and its wide energy gap with blue fluorescence properties was revealed by photophysical measurements. With synthetic strategies towards all three types of CNB in hand, the road to the precise synthesis of CNTs can now proceed to the next stage.The synthesis of a zigzag carbon nanobelt has been achieved through an iterative Diels–Alder reaction followed by reductive aromatization. The isolated nanobelt was fully characterized by X-ray crystallography and its wide energy gap with blue fluorescence properties was revealed by photophysical measurements.

The generation of topologically complex nanocarbons can spur developments in science and technology. However, conventional synthetic routes to interlocked molecules require heteroatoms. We report the synthesis of catenanes and a molecular trefoil knot consisting solely of para-connected benzene rings. Characteristic fluorescence of a heterocatenane associated with fast energy transfer between two rings was observed, and the topological chirality of the all-benzene knot was confirmed by enantiomer separation and circular dichroism spectroscopy. The seemingly rigid all-benzene knot has rapid vortex-like motion in solution even at –95°C, resulting in averaged nuclear magnetic resonance signals for all hydrogen atoms. This interesting dynamic behavior of the knot was theoretically predicted and could stimulate deeper understanding and applications of these previously untapped classes of topological molecular nanocarbons.

Carbon nanotubes (CNTs), tubular molecular entities that consist of sp 2 -hybridized carbon atoms, are currently produced as mixtures that contain tubes of various diameters and different sidewall structures. The electronic and optical properties of CNTs are determined by their diameters and sidewall structures and so a controlled synthesis of uniform-diameter, single-chirality CNTs—a significant chemical challenge—would provide access to pure samples with predictable properties. Here we report a rational bottom-up approach to synthesize structurally uniform CNTs using carbon nanorings (cycloparaphenylenes) as templates and ethanol as the carbon source. The average diameter of the CNTs formed is close to that of the carbon nanorings used, which supports the operation of a ‘growth-from-template’ mechanism in CNT formation. This bottom-up organic chemistry approach is intrinsically different from other conventional approaches to making CNTs and, if it can be optimized sufficiently, offers a route to the programmable synthesis of structurally uniform CNTs. Carbon nanotubes (CNTs) are typically produced as a mixture of tubes with different diameters and sidewall structures — parameters that determine the optical and electronic properties of these materials. Now, it has been shown that discrete carbon nanorings can be used as templates to control the bottom-up growth of CNTs with a narrow distribution of diameters.

Nanometre-sized carbon materials consisting of benzene units oriented in unique geometric patterns, hereafter named nanocarbons, conduct electricity, absorb and emit light, and exhibit interesting magnetic properties. Spherical fullerene C 60 , cylindrical carbon nanotubes and sheet-like graphene are representative forms of nanocarbons, and theoretical simulations have predicted several exotic 3D nanocarbon structures. At present, synthetic routes to nanocarbons mainly lead to mixtures of molecules with a range of different structures and properties, which cannot be easily separated or refined into pure forms. Some researchers believe that it is impossible to synthesize these materials in a precise manner. Obtaining ‘pure’ nanocarbons is a great challenge in the field of nanocarbon science, and the construction of structurally uniform nanocarbons, ideally as single molecules, is crucial for the development of functional materials in nanotechnology, electronics, optics and biomedical applications. This Review highlights the organic chemistry approach — more specifically, bottom-up construction with atomic precision — that is currently the most promising strategy towards this end. Conventional synthesis of nanocarbons, such as graphene, fullerenes and carbon nanotubes, yields mixtures of molecules with varying structures. However, harnessing the full potential of these materials demands atomically precise synthesis methods. Recent advances using organic chemistry are discussed in this Review.

Graphite, the most stable form of elemental carbon, consists of pure carbon sheets stacked upon one another like reams of paper. Individual sheets, known as graphene, prefer planar geometries as a consequence of the hexagonal honeycomb-like arrangements of trigonal carbon atoms that comprise their two-dimensional networks. Defects in the form of non-hexagonal rings in such networks cause distortions away from planarity. Herein we report an extreme example of this phenomenon. A 26-ring C 80 H 30 nanographene that incorporates five seven-membered rings and one five-membered ring embedded in a hexagonal lattice was synthesized by stepwise chemical methods, isolated, purified and fully characterized spectroscopically. Its grossly warped structure was revealed by single-crystal X-ray crystallography. An independent synthetic route to a freely soluble derivative of this new type of ‘nanocarbon’ is also reported. Experimental data reveal how the properties of such a large graphene subunit are affected by multiple odd-membered-ring defects. A grossly warped nanographene, C 80 H 30 , that incorporates five 7-membered rings and one 5-membered ring embedded in a hexagonal lattice has been synthesized, isolated and fully characterized. Experiments revealing how the properties of such a large graphene subunit are affected by multiple odd-membered-ring defects are also reported.

Nucleophilic, anionic boryl compounds are long-sought but elusive species. We report that reductive cleavage of the boron-bromine bond in N,N'-bis(2,6-diisopropylphenyl)-2-bromo-2,3-dihydro-1H-1,3,2-diazaborole by lithium naphthalenide afforded the corresponding boryllithium, which is isoelectronic with an N-heterocyclic carbene. The structure of the boryllithium determined by x-ray crystallography was consistent with sp2 boron hybridization and revealed a boron-lithium bond length of 2.291 ± 0.006 angstroms. The structural similarity between this compound and the calculated free boryl anion suggests that the boron atom has an anionic charge. The 11B nuclear magnetic resonance spectrum also supports the boryl anion character. Moreover, the compound behaves as an efficient base and nucleophile in its reactions with electrophiles such as water, methyl trifluoromethanesulfonate, 1-chlorobutane, and benzaldehyde.

Perfluorinated aromatic compounds, the so-called perfluoroarenes, are widely used in materials science owing to their high electron affinity and characteristic intermolecular interactions. However, methods to synthesize highly strained perfluoroarenes are limited, which greatly limits their structural diversity. Herein, we report the synthesis and isolation of perfluorocycloparaphenylenes (PFCPPs) as a class of ring-shaped perfluoroarenes. Using macrocyclic nickel complexes, we succeeded in synthesizing PF[ n ]CPPs ( n  = 10, 12, 14, 16) in one-pot without noble metals. The molecular structures of PF[ n ]CPPs ( n  = 10, 12, 14) were determined by X-ray crystallography to confirm their tubular alignment. Photophysical and electrochemical measurements revealed that PF[ n ]CPPs ( n  = 10, 12, 14) exhibited wide HOMO–LUMO gaps, high reduction potentials, and strong phosphorescence at low temperature. PFCPPs are not only useful as electron-accepting organic materials but can also be used for accelerating the creation of topologically unique molecular nanocarbon materials. Synthetic methods for the preparation of perfluorinated aromatic compounds are desirable in materials science. Here, the authors synthesize perfluorocycloparaphenylenes, fully fluorinated carbon nanorings, through a nickel-mediated one-pot method.

Chemical modification of nucleotides can improve the metabolic stability and target specificity of oligonucleotide therapeutics, and alkylphosphonates have been employed as charge-neutral replacements for naturally-occurring phosphodiester backbones in these compounds. However, at present, the alkyl moieties that can be attached to phosphorus atoms in these compounds are limited to methyl groups or primary/secondary alkyls, and such alkylphosphonate moieties can degrade during oligonucleotide synthesis. The present work demonstrates the tertiary alkylation of the phosphorus atoms of phosphites bearing two 2’-deoxynuclosides. This process utilizes a carbocation generated via a light-driven radical-polar crossover mechanism. This protocol provides tertiary alkylphosphonate structures that are difficult to synthesize using existing methods. The conversion of these species to oligonucleotides having charge-neutral alkylphosphonate linkages through a phosphoramidite-based approach was also confirmed in this study. Alkylphosphonates are used as chargeneutral replacements for naturally-occurring phosphodiester backbones in nucleotides but the choice of alkyl moieties that can be attached to phosphorus atoms in these compounds is limited to methyl groups or primary/secondary alkyls. Here, the authors demonstrate the tertiary alkylation of the phosphorus atoms of phosphites bearing two 2’-deoxynuclosides using a carbocation generated via a light-driven radical-polar crossover mechanism

Hexa- peri -hexabenzocoronene (HBC) is known to be a poorly soluble polycyclic aromatic hydrocarbon for which direct functionalization methods have been very limited. Herein, the synthesis of hexaborylated HBC from unsubstituted HBC is described. Iridium-catalyzed six-fold C–H borylation of HBC was successfully achieved by screening solvents. The crystal structure of hexaborylated HBC was confirmed via X-ray crystallography. Optoelectronic properties of the thus-obtained hexaborylated HBC were analyzed with the support of density functional theory calculations. The spectra revealed a bathochromic shift of absorption bands compared with unsubstituted HBC under the effect of the σ-donation of boryl groups.

Triaryl-2-pyridylidene effectively facilitates the gold-catalyzed oxidative C–H arylation of heteroarenes with arylsilanes as a unique electron-donating ligand on gold. The employment of the 2-pyridylidene ligand, which is one of the strongest electron-donating N-heterocyclic carbenes, resulted in the rate acceleration of the C–H arylation reaction of heterocycles over conventional ligands such as triphenylphosphine and a classical N-heterocyclic carbene. In situ observation and isolation of the 2-pyridylidene-gold(III) species, as well as a DFT study, indicated unusual stability of gold(III) species stabilized by strong electron donation from the 2-pyridylidene ligand. Thus, the gold(I)-to-gold(III) oxidation process is thought to be facilitated by the highly electron-donating 2-pyridylidene ligand.