Explore the vast range of titles available.

Co-combustion is regarded as an effective means for high-efficiency utilization of low-quality fuels. However, low-quality fuel has problems such as low energy density and high water content. The fuel quality and blending performance can be further optimized by the pretreatment of low-quality fuel, for example, calorific value, hydrophobicity, and NO conversion rate. Based on the idea of co-upgradation, this study systematically investigates the effects of integrated upgrading on fuel quality and hydrophobicity under different conditions. In this study, lignite and wheat straw were selected as research objects. The co-upgrading experiments of wheat straw and lignite were conducted at reaction temperatures of 170 °C, 220 °C, and 270 °C in flue gas and air atmospheres with biomass blending ratios of 0%, 25%, 50%, 75%, and 100%. SEM (scanning electron microscopy) and nitrogen (N2) adsorption analyses showed that under low-temperature and low-oxygen conditions, organic components from biomass pyrolysis migrated in situ to cover the surface of lignite, resulting in a gradual smoothing of the fuel surface and a decrease in the specific surface area. Meanwhile, water reabsorption experiments and contact angle measurements showed that the equilibrium water holding capacity and water absorption capacity of the lifted fuels was weakened, and hydrophobicity was enhanced. Combustion kinetic parameters and pollutant release characteristics were investigated by thermogravimetric analysis (TGA) and isothermal combustion tests. It was found that co-upgradation could effectively reduce the reaction activation energy and NO conversion rate. Characterized by Raman spectroscopy (Raman) and X-ray photoelectron spectroscopy (XPS), in situ migration of organic components affected combustion reactivity by modulating changes in N-containing product precursors. The results showed that the extracted fuel with a 75% biomass blending ratio in the flue gas atmosphere exhibited the best overall performance at 220 °C, with optimal calorific value, combustion reactivity, and hydrophobicity. These findings may provide important theoretical foundations and practical guidance for the optimization of industrial-scale upgrading processes of low-quality fuels.

2-methylisoborneol (MIB, d = 0.6 nm) and dimethyl disulfide (DMDS, d = 0.7 nm) produced by algal metabolism are the main olfactory contaminants of drinking water. Activated carbon (AC) adsorption is an effective method to remove MIB/DMDS, yet critical gaps remain regarding the dominant factors and mechanisms governing their different adsorption performance. The microporous filling mechanism is the dominant mechanism for the adsorption of MIB and DMDS by AC. Surface functional groups play a supporting role in the adsorption process by modulating the hydrophilicity/hydrophobicity of the carbon surface. This study systematically evaluated the adsorption performance of three ACs—coconut shell-derived (CSC), coal-based (CAC), and Sargassum-derived (SAC)—for MIB and DMDS removal. Comparative analysis revealed the superior adsorption performance of CSC, achieving 87.41% removal of MIB and 71.2% removal of DMDS at 20 mg/L. Both MIB and DMDS adsorption adhere to the Langmuir isotherm, indicating monolayer coverage with uniform energy. Kinetic studies demonstrated that the PSO model fits the MIB adsorption process best, while the PFO model fits the DMDS adsorption process best. The FTIR confirmed physical adsorption, with no new chemical bonds formed. Furthermore, regenerated CSC retains significant adsorption capacities, achieving 85.89% and 68.49% of the original capacity for MIB and DMDS, respectively, after five regeneration cycles. This research provides fundamental insights into the mechanistic role of AC properties in odorant removal processes, supporting its sustainable application in water treatment.

Only a third of the people living in Sub-Saharan Africa have access to electricity. While the benefits of electricity services for the society continue to increase, solar home system (SHS) provides a long-term rural electrification and development solution. SHS is thought out to be a robust and cost-effective option for supplying basic electrification under Kenya’s metrological conditions. This paper begins with an in-depth justification of the need for SHS in rural areas, and then it presents an overview of SHS financing, benefits and barriers, followed by a crucial component of existing SHSs in Kenya, Pay-As-You-Go (PAYG) technology. It ends with succinct analysis of the payment models highlighting the benefits, challenges and methods adopted in overcoming those challenges. Lessons from this review suggest that solar firms face a myriad of challenges operating in poor rural areas in Kenya; credit risk is a major concern for solar firms as well as financiers which makes payment models notably challenging. Technical performance of SHS is becoming well proven, and end users desire a wide range of component preferences and service levels that are of benefit. The challenges faced by solar firms using different payment models show that there is a dire need for integration of SHS with rural electrification policy in Kenya. The principal conclusion is that PAYG model offers the best option for SHS dissemination, though energy-as-a-service implementation has a great potential of improving the dissemination process in rural communities as it offers a promising mechanisms from a sustainability point of view.

The shuttle effect of lithium polysulfides (LiPSs) in lithium-sulfur batteries (LSBs) has been hampered their commercialization. Metal oxides as separator modifications can suppress the shuttle effect. Since there is no direct electron transport between metal oxides and LiPSs, absorbed LiPSs should be diffused from the surface of metal oxides to the carbon matrix to go through redox reactions. If diffusivity of LiPSs from metal oxides surface to carbon substrate is poor, it would hinder the redox reactions of LiPSs. Nevertheless, researchers tend to focus on the adsorption and overlook the diffusion of LiPSs. Herein, same morphology and different crystal phase of TiO 2 nanosheets grown on carbon nanotubes (CNTs@TiO 2 -bronze and CNTs@TiO 2 -anatase) have been designed via a simple approach. Compared with CNTs and CNTs@TiO 2 -anatase composites, the battery with CNTs@TiO 2 -bronze modified separator delivers higher specific capacities and stronger cycling stability, especially at high current rates (∼ 472 mAh·g −1 at 2.0 C after 1,000 cycles). Adsorption tests, density functional theory calculations and electrochemical performance evaluations indicate that suitable diffusion and adsorption for LiPSs on the CNTs@TiO 2 -B surface can effectively capture LiPSs and promote the redox reaction, leading to the superior cycling performances.

Pyrolysis and activation processes are important pathways to utilize residues after lipid extraction from microalgae in a high-value way. The obtained microalgae-based nitrogen-doped activated carbon has excellent electrochemical performance. It has the advantage of nitrogen self-doping using high elemental nitrogen in microalgae. In this study, two kinds of microalgae, Nanochloropsis and Chlorella, were used as feedstock for lipid extraction. The microalgae residue was firstly pyrolyzed at 500 °C to obtain biochar. Then, nitrogen-doped activated carbons were synthesized at an activation temperature of 700–900 °C with different ratios of biochar and KOH (1:1, 1:2, and 1:4). The obtained carbon materials presented rich nitrogen functional groups, including quaternary-N, pyridine-N-oxide, pyrrolic-N, and pyridinic-N. The nitrogen content of microalgae-based activated carbon material was up to 2.62%. The obtained materials had a specific surface area of up to 3186 m2/g and a pore volume in the range of 0.78–1.54 cm3/g. The microporous pore sizes of these materials were distributed at around 0.4 nm. Through electrochemical testing such as cyclic voltammetry and galvanostatic charge–discharge of materials, the materials exhibited good reversibility and high charge–discharge efficiency. The sample, sourced from microalgae Chlorella residue at activation conditions of 700 °C and biochar/KOH = 1:4, exhibited excellent endurance of 94.1% over 5000 cycles at 2 A/g. Its high specific capacitance was 432 F/g at 1 A/g.

Semiconductor combination is one of the most common strategies to obtain high-efficiency photocatalysts; however, the effect mechanism of composition ratio on micro-structure and photocatalytic activity is remaining unclear. In this study, a case of g-C 3 N 4 quantum dots@SnS 2 (CNQD n @SnS 2 ) heterojunction with different ratio of CNQD is used to uncover the origin of optimum and excess composition for photocatalysts. Research on the functional mechanism of the optimum composition shows that 0.8 wt.% CNQD are completely attached to the non-(001) facets of SnS 2 , which benefits the formation of type-II heterojunction, resulting in an optimal pollutant degradation and mineralization efficiency. For the excess composition, both experiments and theoretical calculations confirm that excess CNQD (the part exceeding of 0.8 wt.%) located on the (001) facet of SnS 2 , leading to the type-I band alignment of this heterojunction, which severely restricts the separation of photo-induced charge carriers, and thus reduces their lifetime. This work makes the functional mechanism of composition ratio on micro-structure and photocatalytic activity clearer. Related research results provide a new insight into semiconductor combination study and take an important step toward the rational design of highly active photocatalysts.

Wheat straw, a typical agricultural solid waste, was employed to clarify the effects of torrefaction on the structural features and combustion reactivity of biomass. Two typical torrefaction temperatures (543 K and 573 K), four atmospheres (argon, 6 vol.% O2, dry flue gas and raw flue gas) were selected. The elemental distribution, compositional variation, surface physicochemical structure and combustion reactivity of each sample were identified using elemental analysis, XPS, N2 adsorption, TGA and FOW methods. Oxidative torrefaction tended to optimize the fuel quality of biomass effectively, and the enhancement of torrefaction severity improved the fuel quality of wheat straw. The O2, CO2 and H2O in flue gas could synergistically enhance the desorption of hydrophilic structures during oxidative torrefaction process, especially at high temperatures. Meanwhile, the variations in microstructure of wheat straw promoted the conversion of N-A into edge nitrogen structures (N-5 and N-6), especially N-5, which is a precursor of HCN. Additionally, mild surface oxidation tended to promote the generation of some new oxygen-containing functionalities with high reactivity on the surface of wheat straw particles after undergoing oxidative torrefaction pretreatment. Due to the removal of hemicellulose and cellulose from wheat straw particles and the generation of new functional groups on the particle surfaces, the ignition temperature of each torrefied sample expressed an increasing tendency, while the Ea clearly decreased. According to the results obtained from this research, it could be concluded that torrefaction conducted in a raw flue gas atmosphere at 573 K would improve the fuel quality and reactivity of wheat straw most significantly.

Coal gangue is a kind of typical by-product emitted during the coal mining and washing process. With the increase in coal resource utilization, a large amount of coal gangue was not reasonably utilized, causing environmental pollution and resource waste. The main purpose of this article is to introduce the surface structural features and compositional characteristics of coal gangue and to summarize the utilization of coal gangue in the fields of building materials, energy production, agricultural utilization, and high-value-added areas such as catalysts and adsorbents. Secondly, this review discussed the environmental challenges and technical difficulties derived from the process of coal gangue utilization and how to solve these problems through innovative methods and technological improvements. Finally, the article proposed the development direction and strategies for the future resource utilization of coal gangue, emphasizing the importance of coal gangue as a sustainable resource and its significant role in achieving a circular economy for reducing environmental pollution. By analyzing the potentiality of coal gangue for resource utilization systematically, this article aims to provide valuable references and insights for researchers and decision-makers in related fields.

The cultivation of microalgae and microalgae–bacteria consortia provide a potential efficient strategy to fix CO 2 from waste gas, treat wastewater and produce value-added products subsequently. This paper reviews recent developments in CO 2 fixation and wastewater treatment by single microalgae, mixed microalgae and microalgae–bacteria consortia, as well as compares and summarizes the differences in utilizing different microorganisms from different aspects. Compared to monoculture of microalgae, a mixed microalgae and microalgae–bacteria consortium may mitigate environmental risk, obtain high biomass, and improve the efficiency of nutrient removal. The applied microalgae include Chlorella sp., Scenedesmus sp., Pediastrum sp., and Phormidium sp. among others, and most strains belong to Chlorophyta and Cyanophyta. The bacteria in microalgae–bacteria consortia are mainly from activated sludge and specific sewage sources. Bioengineer in CBB cycle in microalgae cells provide effective strategy to achieve improvement of CO 2 fixation or a high yield of high-value products. The mechanisms of CO 2 fixation and nutrient removal by different microbial systems are also explored and concluded, the importance of microalgae in the technology is proven. After cultivation, microalgae biomass can be harvested through physical, chemical, biological and magnetic separation methods and used to produce high-value by-products, such as biofuel, feed, food, biochar, fertilizer, and pharmaceutical bio-compounds. Although this technology has brought many benefits, some challenging obstacles and limitation remain for industrialization and commercializing. Graphical Abstract

To promote the practical application of TiO2 in photocatalytic toluene oxidation, the honeycomb aluminum plates were selected as the metal substrate for the loading of TiO2 powder. Surface-etching treatment was performed and titanium tetrachloride was selected as the binder to strengthen the loading stability. The loading stability and photocatalytic activity of the monolithic catalyst were further investigated, and the optimal surface treatment scheme (acid etching with 15.0 wt.% HNO3 solution for 15 min impregnation) was proposed. Therein, the optimal monolithic catalyst could achieve the loading efficiency of 42.4% and toluene degradation efficiencies of 76.2%. The mechanism for the stable loading of TiO2 was revealed by experiment and DFT calculation. The high surface roughness of metal substrate and the strong chemisorption between TiO2 and TiCl4 accounted for the high loading efficiency and photocatalytic activity. This work provides the pioneering exploration for the practical application of TiO2 catalysts loaded on the surface of metal substrate for VOCs removal, which is of significance for the large-scaled application of photocatalytic technology.