Explore the vast range of titles available.

An experiment was carried to evaluate the energy and protein requirements for the growth and maintenance of lambs of different sex classes. In all, 38 hair lambs (13.0±1.49 kg initial BW and 2 months old) were allocated in a factorial design with diet restriction levels (ad libitum, 30% and 60% feed restriction) and sex classes (castrated and non-castrated males). Four animals from each sex class were slaughtered at the beginning of the trial as a reference group to estimate the initial empty BW and body composition. The remaining lambs were weighed weekly to calculate BW gain (BWG), and when the animals fed ad libitum reached an average BW of 30 kg, all of the experimental animals were slaughtered. Before slaughter, fasted BW (FBW) was determined after 18 h without feed and water. Feed restriction induced reductions in body fat and energy concentration, whereas water restriction showed the opposite effect, and the protein concentration was not affected. The increase in BW promoted increases in body fat and energy content, and these increases were greater in castrated lambs, whereas the protein content was similar between classes tending to stabilize. The net energy required for gain (NEg) and the net protein required for gain (NPg) were not affected by sex class; therefore, an equation was generated for the combined results of both castrated and non-castrated lambs. The NEg varied from 1.13 to 2.01 MJ/day for lambs with BW of 15 and 30 kg and BWG of 200 g. The NPg varied from 24.57 to 16.33 g/day for lambs with BW of 15 and 30 kg and BWG of 200 g. The metabolizable energy efficiency for gain (k g) was 0.37, and the metabolizable protein efficiency for gain (k pg) was 0.28. The net energy required for maintenance (NEm) and the net requirement of protein for maintenance (NPm) did not differ between castrated and non-castrated lambs, with values of 0.241 MJ/kg FBW0.75 per day and 1.30 g/kg FBW0.75 per day, respectively. The metabolizable energy efficiency for maintenance (k m) was 0.60, and the efficiency of metabolizable protein use for maintenance (k pm) was 0.57. Nutritional requirements for growth and maintenance did not differ between castrated and non-castrated lambs. This study emphasizes the importance of updating the tables of international committees and of including data obtained from studies with sheep breeds raised in tropical conditions, with the purpose of improving the productive efficiency of the animals

To estimate the nutritional requirements of hair sheep, knowledge about the animal's weight and its relationships with growth performances is essential. A study was carried with the objective to establish the relationships between BW, fasting BW (FBW), empty BW (EBW), average daily gain (ADG) and empty BW gain (EBWG) for hair sheep in growing and finishing phases in Brazilian conditions. Databases were obtained from 32 studies, for a total of 1145 observations; there were 3 sex classes (non-castrated male, castrated male and female) and 2 feeding systems (pasture and feedlot). The most representative breeds in the database were Santa Ines (n = 473), Morada Nova (n = 70) and Brazilian Somali (n = 47). The other animals in the database were crossbreeds (n = 555). The FBW (kg), EBW and EBWG (kg/day) were estimated according to linear regression. A random coefficient model was adopted, considering the study as a random effect and including the possibility of covariance between the slope and the intercept. The coefficients obtained from the linear regression of the FBW against the BW, EBW against the FBW and EBWG against the ADG did not differ between sex class (P > 0.05) and genotype (P > 0.05). The equations generated to estimate FBW from the BW, EBW from the FBW and EBWG from the ADG are as follows: FBW = -0.5470 (±0.2025) + 0.9313(±0.019) × BW, EBW = -1.4944 (±0.3639) + 0.8816 (±0.018) × FBW and EBWG = 0.906 (±0.019) × ADG, respectively. The low mean squared error values found in the cross-validation confirmed the reliability of these equations. Considering a sheep with a BW of 30 kg and a 100 g ADG, the estimated FBW, EBW and EBWG calculated using the generated equations are 27, 22.65 and 0.090 kg, respectively. In conclusion, the generated equations can be used in growing hair sheep. The validation procedure applied to the generated equations showed that its use for hair sheep seems to be appropriate.

It is well established that magnesium has a considerable potential for use as a biodegradable material. This report describes the effect of processing by severe plastic deformation (SPD) on the grain refinement, mechanical behavior, biocompatibility and corrosion behavior of commercial purity magnesium. The material was received as cast slabs and processed by rolling, equal-channel angular pressing and high-pressure torsion to produce samples with average grain sizes in the range of ~0.5–300 μm. The results show that severe plastic deformation does not affect the biocompatibility. However, the corrosion behavior is affected by the processing route. Specifically, SPD processing leads to general corrosion as opposed to localized corrosion in the as-cast and hot-rolled condition.

Minerals are limiting factors in animal production, and the knowledge of mineral requirements for livestock is crucial to the success of a commercial enterprise. Hair sheep may have different mineral requirements than those presents by the international committees. A study was carried to evaluate the net calcium (Ca), phosphorus (P), magnesium (Mg), sodium (Na), potassium (K), zinc (Zn), iron (Fe), manganese (Mn) and copper (Cu) requirements for the growth and maintenance of Brazilian Somali lambs. A total of 48 hair lambs (13.5±1.8 kg) aged 60±15 days were allocated to individual pens. Eight animals were slaughtered at the beginning of the experiment to serve as a reference group to estimate initial empty BW (EBW) and initial body composition. The remaining lambs (n=40) were assigned to a completely randomized design with eight replications in five levels of metabolizable energy (ME; 4.93, 8.65, 9.41, 10.12 and 11.24 MJ/kg DM). When the lambs of a given treatment reached an average BW of 28 kg, they were slaughtered. Initial body composition was used to calculate the retention of minerals. Mineral body composition was fit using a logarithmic equation in the form of a nonlinear model. The maintenance requirements were estimated from regressions of mineral retention in the empty body on mineral intake. The body mineral concentration decreased in lambs with a BW ranging from 15 to 30 kg. The net mineral requirements (100 g/day of average daily gain (ADG)) decreased from 0.52 to 0.51 g for Ca, 0.28 to 0.23 g for P, 0.02 to 0.02 g for Mg, 0.09 to 0.08 g for Na, 0.11 to 0.09 g for K, 1.30 to 1.08 mg for Zn, 3.77 to 3.22 mg for Fe, 0.08 to 0.06 mg for Mn and 0.09 to 0.08 mg for Cu when BW increased from 15 to 30 kg. The daily net requirements for maintenance per kilogram of BW were 30.13 mg of Ca, 27.58 mg of P, 1.26 mg of Mg, 4.12 mg of Na, 8.11 mg of K, 0.133 mg of Zn, 0.271 mg of Fe, 0.002 mg of Mn and 0.014 mg of Cu. The results of this study indicate that the net mineral requirements for weight gain and maintenance in Brazilian Somali lambs are different than the values that are commonly recommended by the main evaluation systems for feed and nutritional requirements for sheep. These results for the nutritional requirements of minerals may help to optimize mineral supply for hair sheep.

Commercially pure magnesium was processed by severe plastic deformation techniques and thermo-mechanical routes to produce samples with grain sizes in the range from 1.0 to 300 µm. Tensile testing of a fine-grained material revealed a decrease in hardening and an increase in strain rate sensitivity with decreasing testing strain rate from 10⁻² to 10⁻⁷ s⁻¹. Compression testing of fine-grained samples not only revealed similar trend, but also there was a transition from twinning to slip-dominated flow. Dynamic ultra-microhardness testing showed an increase in strain rate sensitivity with decreasing grain size. The trend of decreasing hardening rate and increasing strain rate sensitivity with decreasing strain rate was not observed in samples with a coarser grain size. Compression testing at different temperatures suggests that a creep mechanism with stress exponent of ~7 and activation energy close to grain boundary diffusion operates at low strain rates and moderate temperatures. A model for a new deformation mechanism is proposed based on the present experimental results and published data.

The increase of sheep meat competitiveness in international markets can be attributed to the rise of the quantity and the improvement of the quality of the edible portion of sheep carcasses. Usually, carcass yield is established after the slaughter of the animals. Yet, when carcass yield is determined in vivo, it can be both a costly and subjective method. This study proposes models for predicting the physical characteristics of lamb carcass using bioimpedance analysis (BIA) in live animals. Thirty-one Texel × Ile de France crossbreed ram lambs were slaughtered at 20, 26, 32 or 38 kg of BW. Before the slaughter, values of resistance (Rs) and reactance (Xc) were collected using a single-frequency BIA equipment (Model RJL Quantum II Bioelectrical Body Composition Analyzer). Then, BIA main variables such as body bioelectrical volume (V), phase angle (PA), resistive density (RsD) and reactive density (XcD) were calculated. After slaughter, cold carcass weight (CCW), cold carcass yield (CCY), subcutaneous fat thickness (SFT), soft tissue weight (STW) and soft tissue yield (STY) were also measured. Multiple regression analyses were carried out using the physical characteristics as dependent variables and the bioimpedance values as independent variables. Predictive performance of the models was assessed using leave-one-out cross-validation. The prediction model of CCW was obtained using the V, PA and RsD (R2 = 0.97), STW through the V, RsD and XcD (R2 = 0.97), CCY by Rs, Z and XcD (R2 = 0.69), STY by V and XcD (R2 = 0.67), and SFT only for XcD (R2 = 0.84). The results indicated that BIA has the potential to predict carcass characteristics of lambs at different body masses.

•Atomic force microscopy to study time since deposition of RBCs in bloodstains.•Different supports influence the structural features of RBCs on bloodstains.•Force spectroscopy as a reliable tool to determine the membrane elasticity of RBCs. Bloodstains can provide important information about a criminal act. These biological traces, when analyzed at murder sites, for example, can determine the dynamics of a criminal offense, the identity of a suspect, and the time at which a crime was committed. Determine the time since deposition (TSD) of these blood traces may be the first clue for the police investigators to estimate the time-lapse of a murder. During a criminal attack, the blood spilled from an injury begins the process of degradation and aging from the moment it leaves the human body and comes into contact with the physical environment. The biophysical properties (morphology and elasticity) of red blood cells (RBCs) undergo several changes when outside the human body, which can be analyzed using microscopic techniques such as atomic force microscopy (AFM). Aiming to apply the AFM/force spectroscopy techniques in the analysis of criminal traces, the present study investigated the TSD for blood smears by analyzing possible changes in the RBCs of a group of voluntary donors. Also, we investigated whether there was any difference in TSD analysis after blood smears deposition onto three different surfaces (glass, metal, or ceramic); and finally, we evaluated force×distance curves obtained from deformation of the membrane surface of RBCs as a function of time. The qualitative results apparently showed that there is no perceptible difference in the structure of RBCs when AFM images were analyzed by simple visual comparison over 28 days (T0–T5). Nevertheless, our quantitative results, measured by AFM, demonstrated the increasing trend of the measurements, such as average height (μm), perimeter (μm), area (μm2) and volume (μm3) of these cells during that period. Additionally, the type of surface of bloodstain deposition should be considered during analyses for the TSD, and the results obtained on glass, metal, or ceramic supports showed significant differences. Therefore, the use of force spectroscopy to obtain force×distance curves for the forensic science approach has been shown to have applicability for the calculation of TSD in the RBCs present in the blood smears. In spite of the promising observations obtained, the use of AFM in crime scenes still requires the expansion and development of more studies for a definitive evaluation of the TSD for blood spots.

The purposes were to synthesize as much scientific evidence as possible to determine the effect of core training on balance, throwing/hitting velocity or distance, and jumping in healthy subjects, identify the possible differences between isolated and combined core training on performance and study training and sample variables related to performance. PRISMA guidelines were followed, and a systematic search was performed in the Scopus, Web of Science, Sports Discuss, and PubMed databases with no date restrictions until November 2022. The studies were considered for this meta-analysis following PICO; a) randomized control trials and randomized allocation studies with healthy subjects and > 12 years old b)isolated or combined core training programs with a minimum of 4 weeks in length; c) athletic performance outcomes for balance, throw/hit, and jump variables should be measured; d) sufficient data to calculate effect sizes. The Cochrane Collaboration Risk of Bias Tool and the Grading of Recommendations Assessment, Development, and Evaluation approach were used for assessing methodological quality. A total of 3223 studies were identified, 22 studies were included in the systematic review and 21 for the meta-analysis. We observed that core training improved balance outcomes (ES = 1.17; p < 0.0001), throwing/hitting velocity (ES = 0.30; p = 0.14), throwing/hitting distance (ES = 3.42; p = 0.03), vertical jumping (ES = 0.69; p = 0.0003), and horizontal jump (ES = 0.84; p = 0.01). Our findings indicate that core training improved different variables of performance such as balance, throw/hit, and vertical and horizontal jump.

Cardiovascular diseases (CVD) are the deadliest noncommunicable disease worldwide. Hypertension is the most prevalent risk factor for the development of CVD. Although there is a wide range of antihypertensive drugs, there still remains a lack of blood pressure control options for hypertensive patients. Additionally, natural products remain crucial to the design of new drugs. The natural product 7-hydroxycoumarin (7-HC) exhibits pharmacological properties linked to antihypertensive mechanisms of action. This study aimed to evaluate the vascular effects of 7-HC in an experimental model of essential hypertension. The isometric tension measurements assessed the relaxant effect induced by 7-HC (0.001 μM–300 μM) in superior mesenteric arteries isolated from hypertensive rats (SHR, 200–300 g). Our results suggest that the relaxant effect induced by 7-HC rely on K[sup.+]-channels (K[sub.ATP], BK[sub.Ca], and, to a lesser extent, K[sub.v]) activation and also on Ca[sup.2+] influx from sarcolemma and sarcoplasmic reticulum mobilization (inositol 1,4,5-triphosphate (IP3) and ryanodine receptors). Moreover, 7-HC diminishes the mesenteric artery’s responsiveness to α1-adrenergic agonist challenge and improves the actions of the muscarinic agonist and NO donor. The present work demonstrated that the relaxant mechanism of 7-HC in SHR involves endothelium-independent vasorelaxant factors. Additionally, 7-HC reduced vasoconstriction of the sympathetic agonist while improving vascular endothelium-dependent and independent relaxation.

Background Knowledge of the normal limits of the electrocardiogram (ECG) is mandatory for establishing which patients have abnormal ECGs. No studies have assessed the reference standards for a Latin American population. Our aim was to establish the normal ranges of the ECG for pediatric and adult Brazilian primary care patients. Methods This retrospective observational study assessed all the consecutive 12-lead digital electrocardiograms of primary care patients at least 1 year old in Minas Gerais state, Brazil, recorded between 2010 and 2015. ECGs were excluded if there were technical problems, selected abnormalities were present or patients with selected self-declared comorbidities or on drug therapy. Only the first ECG from patients with multiple ECGs was accepted. The University of Glasgow ECG analysis program was used to automatically interpret the ECGs. For each variable, the 1st, 2nd, 50th, 98th and 99th percentiles were determined and results were compared to selected studies. Results A total of 1,493,905 ECGs were recorded. 1,007,891 were excluded and 486.014 were analyzed. This large study provided normal values for heart rate, P, QRS and T frontal axis, P and QRS overall duration, PR and QT overall intervals and QTc corrected by Hodges, Bazett, Fridericia and Framingham formulae. Overall, the results were similar to those from other studies performed in different populations but there were differences in extreme ages and specific measurements. Conclusions This study has provided reference values for Latinos of both sexes older than 1 year. Our results are comparable to studies performed in different populations.