Explore the vast range of titles available.

Efficient electrocatalysts for hydrogen evolution reaction are key to realize clean hydrogen production through water splitting. As an important family of functional materials, transition metal oxides are generally believed inactive towards hydrogen evolution reaction, although many of them show high activity for oxygen evolution reaction. Here we report the remarkable electrocatalytic activity for hydrogen evolution reaction of a layered metal oxide, Ruddlesden−Popper-type Sr 2 RuO 4 with alternative perovskite layer and rock-salt SrO layer, in an alkaline solution, which is comparable to those of the best electrocatalysts ever reported. By theoretical calculations, such excellent activity is attributed mainly to an unusual synergistic effect in the layered structure, whereby the (001) SrO-terminated surface cleaved in rock-salt layer facilitates a barrier-free water dissociation while the active apical oxygen site in perovskite layer promotes favorable hydrogen adsorption and evolution. Moreover, the activity of such layered oxide can be further improved by electrochemistry-induced activation. Water may serve as a renewable hydrogen fuel source to replace fossil fuels, although such electrolysis requires highly active catalysts. Here, authors explore Ruddlesden−Popper oxides as hydrogen evolution electrocatalysts that feature an unusual synergistic effect to promote high activity.

Direct experimental observations of the interface structure can provide vital insights into heterogeneous catalysis. Examples of interface design based on single atom and surface science are, however, extremely rare. Here, we report Cu–Sn single-atom surface alloys, where isolated Sn sites with high surface densities (up to 8%) are anchored on the Cu host, for efficient electrocatalytic CO 2 reduction. The unique geometric and electronic structure of the Cu–Sn surface alloys (Cu 97 Sn 3 and Cu 99 Sn 1 ) enables distinct catalytic selectivity from pure Cu 100 and Cu 70 Sn 30 bulk alloy. The Cu 97 Sn 3 catalyst achieves a CO Faradaic efficiency of 98% at a tiny overpotential of 30 mV in an alkaline flow cell, where a high CO current density of 100 mA cm −2 is obtained at an overpotential of 340 mV. Density functional theory simulation reveals that it is not only the elemental composition that dictates the electrocatalytic reactivity of Cu–Sn alloys; the local coordination environment of atomically dispersed, isolated Cu–Sn bonding plays the most critical role. The understanding of catalytic reactions at the atomic interface is vital; however, the characterization and mechanism studies of atomically dispersed catalysts remain challenging. Here, the authors demonstrate Cu–Sn surface alloys with isolated Sn atoms on a Cu host to achieve efficient CO 2 to CO conversion.

Platinum is the most efficient catalyst for hydrogen evolution reaction in acidic conditions, but its widespread use has been impeded by scarcity and high cost. Herein, Pt atomic clusters (Pt ACs) containing Pt-O-Pt units were prepared using Co/N co-doped carbon (CoNC) as support. Pt ACs are anchored to single Co atoms on CoNC by forming strong interactions. Pt-ACs/CoNC exhibits only 24 mV overpotential at 10 mA cm −2 and a high mass activity of 28.6 A mg −1 at 50 mV, which is more than 6 times higher than commercial Pt/C with any Pt loadings. Spectroscopic measurements and computational modeling reveal the enhanced hydrogen generation activity attributes to the charge redistribution between Pt and O atoms in Pt-O-Pt units, making Pt atoms the main active sites and O linkers the assistants, thus optimizing the proton adsorption and hydrogen desorption. This work opens an avenue to fabricate noble-metal-based ACs stabilized by single-atom catalysts with desired properties for electrocatalysis. Modulating single-metal sites at the atomic level can boost the intrinsic catalytic activity. Here, the authors describe the design of Pt atomic clusters containing Pt-O-Pt units supported on Co single atoms and N co-doped carbon for enhanced hydrogen evolution catalysis.

Nickel-based catalysts are most commonly used in industrial alkaline water electrolysis. However, it remains a great challenge to address the sluggish reaction kinetics and severe deactivation problems of hydrogen evolution reaction (HER). Here, we show a Cu-doped Ni catalyst implanted with Ni-O-VOx sites (Ni(Cu)VOx) for alkaline HER. The optimal Ni(Cu)VOx electrode exhibits a near-zero onset overpotential and low overpotential of 21 mV to deliver –10 mA cm −2 , which is comparable to benchmark Pt/C catalyst. Evidence for the formation of Ni-O-VOx sites in Ni(Cu)VOx is established by systematic X-ray absorption spectroscopy studies. The VOx can cause a substantial dampening of Ni lattice and create an enlarged electrochemically active surface area. First-principles calculations support that the Ni-O-VOx sites are superactive and can promote the charge redistribution from Ni to VOx, which greatly weakens the H-adsorption and H 2 release free energy over Ni. This endows the Ni(Cu)VOx electrode high HER activity and long-term durability. Producing H 2 from water using electricity and earth-abundant elements is necessary for worldwide renewable fuel production, yet most electrocatalysts have sluggish activities or poor stabilities. Here, authors show vanadium oxide modified copper-doped nickel to enable active and durable H 2 evolution.

The state-of-the-art active HER catalysts in acid media (e.g., Pt) generally lose considerable catalytic performance in alkaline media mainly due to the additional water dissociation step. To address this issue, synergistic hybrid catalysts are always designed by coupling them with metal (hydro)oxides. However, such hybrid systems usually suffer from long reaction path, high cost and complex preparation methods. Here, we discover a single-phase HER catalyst, SrTi 0.7 Ru 0.3 O 3-δ (STRO) perovskite oxide highlighted with an unusual super-exchange effect, which exhibits excellent HER performance in alkaline media via atomic-scale synergistic active centers. With insights from first-principles calculations, the intrinsically synergistic interplays between multiple active centers in STRO are uncovered to accurately catalyze different elementary steps of alkaline HER; namely, the Ti sites facilitates nearly-barrierless water dissociation, Ru sites function favorably for OH* desorption, and non-metal oxygen sites (i.e., oxygen vacancies/lattice oxygen) promotes optimal H* adsorption and H 2 desorption. Efficient electrocatalysts are crucial for the sustainable hydrogen production as an alternative clean fuel. Here, the authors explore a single-phase perovskite oxide as a high-performance hydrogen evolution electrocatalyst via super-exchange induced atomic scale synergistic active sites.

Single Pt atom catalysts are key targets because a high exposure of Pt substantially enhances electrocatalytic activity. In addition, PtRu alloy nanoparticles are the most active catalysts for the methanol oxidation reaction. To combine the exceptional activity of single Pt atom catalysts with an active Ru support we must overcome the synthetic challenge of forming single Pt atoms on noble metal nanoparticles. Here we demonstrate a process that grows and spreads Pt islands on Ru branched nanoparticles to create single-Pt-atom-on-Ru catalysts. By following the spreading process by in situ TEM, we found that the formation of a stable single atom structure is thermodynamically driven by the formation of strong Pt–Ru bonds and the lowering of the surface energy of the Pt islands. The stability of the single-Pt-atom-on-Ru structure and its resilience to CO poisoning result in a high current density and mass activity for the methanol oxidation reaction over time. PtRu nanoparticles are the state-of-the-art catalysts for methanol electrooxidation—the anodic reaction in direct methanol fuel cells. Now, a method of dispersing single Pt atoms over Ru nanoparticles is presented and monitored in situ, thereby boosting the catalytic performance in the methanol oxidation reaction.

Versatile superstructures composed of nanoparticles have recently been prepared using various disassembly methods. However, little information is known on how the structural disassembly influences the catalytic performance of the materials. Here we show how the disassembly of an ordered porous La 0.6 Sr 0.4 MnO 3 perovskite array, to give hexapod mesostructured nanoparticles, exposes a new crystal facet which is more active for catalytic methane combustion. On fragmenting three-dimensionally ordered macroporous (3DOM) structures in a controlled manner, via a process that has been likened to retrosynthesis, hexapod-shaped building blocks can be harvested which possess a mesostructured architecture. The hexapod-shaped perovskite catalyst exhibits excellent low temperature methane oxidation activity ( T 90% =438 °C; reaction rate=4.84 × 10 −7  mol m −2  s −1 ). First principle calculations suggest the fractures, which occur at weak joints within the 3DOM architecture, afford a large area of (001) surface that displays a reduced energy barrier for hydrogen abstraction, thereby facilitating methane oxidation. Disassembly of three-dimensionally ordered materials generates nanoparticles with new structural and physicochemical properties. Here the authors show a fragmentation strategy applied to a perovskite material leading to nanostructures with improved catalytic activity in the methane combustion.

Fe-based Prussian blue analogs are promising positive electrodes for sodium-ion batteries due to their open framework and high theoretical capacity, yet suffer from structural degradation caused by interstitial water, lattice distortion, and irreversible phase transitions. Here we show a selection principle for alkali metal ion lattice engineering, based on geometric matching, hydration energy, and Fe-N bonding strength, to design high-energy, long-life positive electrodes. We demonstrate that immobilizing Cs + ions at the alkali metal sites enhances the structural and electrochemical stability of iron-based Prussian blue analogs. The introduced Cs + pillars alleviate lattice contraction, suppress framework distortion, enhance Fe-N covalency, and reduce crystal water content. These modifications promote sodium ion diffusion and charge transfer kinetics, especially across phase transition regions. Consequently, the optimized positive electrode delivers a high capacity retention of 81.48% after 1000 cycles at 750 mA g −1 and maintains 77.55% of its capacity at a high specific current of 7500 mA g −1 . It also exhibits good air stability and wide-temperature performance. A proof-of-concept pouch cell demonstrates its practical viability. This work establishes a viable selection principle for alkali-metal-site regulation, advancing the development of long-life, high-energy Prussian blue positive electrodes for large-scale sodium-ion battery applications. Fe-based Prussian blue positive electrodes for sodium-ion batteries often suffer from stability issues. Here, the authors establish an alkali metal-site selection principle involving Cs⁺ ions to enhance structural stability, enabling long-life positive electrodes with performance further validated in a pouch cell.

The attractive optoelectronic properties of conducting polymers depend sensitively upon intra- and inter-polymer chain interactions, and therefore new methods to manipulate these interactions are continually being pursued. Here, we report a study of the isotopic effects of deuterium substitution on the structure, morphology and optoelectronic properties of regioregular poly(3-hexylthiophene)s with an approach that combines the synthesis of deuterated materials, optoelectronic properties measurements, theoretical simulation and neutron scattering. Selective substitutions of deuterium on the backbone or side-chains of poly(3-hexylthiophene)s result in distinct optoelectronic responses in poly(3-hexylthiophene)/[6,6]-phenyl-C61-butyric acid methyl ester (PCBM) photovoltaics. Specifically, the weak non-covalent intermolecular interactions induced by the main-chain deuteration are shown to change the film crystallinity and morphology of the active layer, consequently reducing the short-circuit current. However, side-chain deuteration does not significantly modify the film morphology but causes a decreased electronic coupling, the formation of a charge transfer state, and increased electron–phonon coupling, leading to a remarkable reduction in the open circuit voltage. Isotopic substitution alters the optoelectronic properties of conducting polymers, but a microscopic understanding is still missing. Shao et al. address this effect using a series of polymer isotopes that are synthesized with deuterium atoms substituted either on their backbone or side chains.

Aging infrastructure and growing interests in river restoration have led to a substantial rise in dam removals in the United States. However, the decision to remove a dam involves many complex trade-offs. The benefits of dam removal for hazard reduction and ecological restoration are potentially offset by the loss of hydroelectricity production, water supply, and other important services. We use a multiobjective approach to examine a wide array of trade-offs and synergies involved with strategic dam removal at three spatial scales in New England. We find that increasing the scale of decision-making improves the efficiency of trade-offs among ecosystem services, river safety, and economic costs resulting from dam removal, but this may lead to heterogeneous and less equitable local-scale outcomes. Our model may help facilitate multilateral funding, policy, and stakeholder agreements by analyzing the trade-offs of coordinated dam decisions, including net benefit alternatives to dam removal, at scales that satisfy these agreements.