Explore the vast range of titles available.

Use of electronic nicotine delivery systems (ENDS), such as electronic cigarettes (e-cigs), is increasing across the US population and is particularly troubling due to their adoption by adolescents, teens, and young adults. The industry's marketing approach for these instruments of addiction has been to promote them as a safer alternative to tobacco, a behavioral choice supporting smoking cessation, and as the 'cool' appearance of vaping with flavored products (e.g. tutti frutti, bubble gum, and buttered popcorn etc.). Thus, there is a clear need to better document the health outcomes of e-cig use in the oral cavity of the addicted chronic user. There appears to be an array of environmental toxins in the vapors, including reactive aldehydes and carbonyls resulting from the heating elements action on fluid components, as well as from the composition of chemical flavoring agents. The chemistry of these systems shows that the released vapors from the e-cigs frequently contain levels of environmental toxins that considerably exceed federal occupational exposure limits. Additionally, the toxicants in the vapors appear to be retained in the host fluids/tissues at levels often approximating 90% of the levels in the e-cig vapors. These water-soluble reactive toxins can challenge the oral cavity constituents, potentially contributing to alterations in the autochthonous microbiome and host cells critical for maintaining oral homeostasis. This review updates the existing chemistry/environmental aspects of e-cigs, as well as providing an overview of the somewhat limited data on potential oral health effects that could occur across the lifetime of daily e-cig users.

This study explores potential associations among ambient particulate matter (PM) exposure, PM load in alveolar macrophage (AM), and biomarkers collected from 53 healthy, adult, nonsmoking residents of the Iztapalapa and Iztacalco municipalities in Mexico City. Ambient PM 2.5 concentrations were estimated using an improved Land Use Regression (LUR) model to approximate PM exposure levels. The PM/carbon loading was quantified by the fraction of AM containing PM (%, %AMPM) and the PM area within the AM (µm 2 ) from BAC cytospin microphotography using CellProfiler cell image analysis software. Concentrations of biomarkers were analyzed in bronchoalveolar lavage fluid (BALF), plasma, and urine. Most AM samples contained PM (median = 62.4%, interquartile range [IQR] = 50.0–73.0%). The median PM area in AM was 1.082 µm 2 (IQR = 0.607–1.855 µm 2 ). Participant with low %AMPM (< 33 percentile) showed 8% increase in %AMPM per 10 µg/m 3 increments of six-month averaged, LUR-estimated PM 2.5 concentrations. The %AMPM had a statistically significant, positive association with plasma von Willebrand Factor (vWF) ( p  = 0.016) and serum lactase dehydrogenase (LDH) ( p  = 0.026). These findings suggest that ambient urban PM exposure in Mexico City contributes to PM accumulation in AMs and may trigger systemic inflammation and oxidative stress in healthy young residents.

Several studies have shown the presence of aldehydes (i.e., formaldehyde, acrolein) in mainstream emissions of some e-cigarettes. For this reason, concerns have been raised regarding potential toxicity. The purpose of this research was to measure levels of carbonyls in exhaled breath of e-cigarette users during “vaping” sessions and estimate the respiratory tract (RT) uptake of specific aldehydes, including formaldehyde and acetaldehyde. We measured concentrations of 12 carbonyls in e-cigarette aerosols produced directly by e-cigarettes and in the exhaled breath of 12 participants (19 sessions). Carbonyls were sampled on 2,4-dinitrophenylhydrazine (DNPH) cartridges and analyzed with high performance liquid chromatography (HPLC) coupled with a UV/Vis photodiode detector. We found that in most cases, levels of aldehydes and methyl ethyl ketone (MEK) were significantly higher (2–125 times) in exhaled e-cigarette breaths than in pre-exposed breath. Exposure levels for the most abundant individual carbonyls in e-cigarette emissions—formaldehyde, acetaldehyde, acrolein—were between the limit of quantification (LOQ) and 24.4 μg·puff−1. The mean retention of formaldehyde in the respiratory tract was 99.7 ± 0.9% for all participants, while acetaldehyde retention was 91.6 ± 9.9%. Within the limitation of a small number of participants, our results showed that there is an increase in breath carbonyls during e-cigarette use.

A simple-to-use, portable, and relatively inexpensive system for characterizing the chemical components of mainstream smoke from cannabis cigarettes was developed and tested by using commercial hemp cigarettes. The system is described, and its performance for reproducing actual user puff topographies is shown along with extensive chemical analysis data, including PAHs, carbonyls, and organic and elemental carbon, for a small set of initial samples. By using a solid-state flow meter and fast-response mass flow controller, the prototype can reproduce measured puff topography with excellent fidelity, which will allow users to accurately reproduce the actual inhalation patterns for various types of smoking products and consumers, and to collect samples of mainstream smoke without the need to bring test subjects or controlled substances into a laboratory.

Emissions generated by wildfires are a growing threat to human health and are characterized by a unique chemical composition that is tightly dependent on geographic factors such as fuel type. Long noncoding RNAs (lncRNAs) are a class of RNA molecules proven to be critical to many biological processes, and their condition-specific expression patterns are emerging as prominent prognostic and diagnostic biomarkers for human disease. We utilized a new air-liquid interface (ALI) direct exposure system that we designed and validated in house to expose immortalized human tracheobronchial epithelial cells (AALE) to two unique wildfire smokes representative of geographic regions (Sierra Forest and Great Basin). We conducted an RNAseq analysis on the exposed cell cultures and proved through both principal component and differential expression analysis that each smoke has a unique effect on the LncRNA expression profiles of the exposed cells when compared to the control samples. Our study proves that there is a link between the geographic origin of wildfire smoke and the resulting LncRNA expression profile in exposed lung cells and also serves as a proof of concept for the in-house designed ALI exposure system. Our study serves as an introduction to the scientific community of how unique expression patterns of LncRNAs in patients with wildfire smoke-related disease can be utilized as prognostic and diagnostic tools, as the current roles of LncRNA expression profiles in wildfire smoke-related disease, other than this study, are completely uncharted.

Oxidative stress is one of the key mechanisms linking ambient particulate matter (PM) exposure with various adverse health effects. The oxidative potential of PM has been used to characterize the ability of PM induced oxidative stress. Hydroxyl radical (•OH) is the most destructive radical produced by PM. However, there is currently no high-throughput approach which can rapidly measure PM-induced •OH for a large number of samples with an automated system. This study evaluated four existing molecular probes (disodium terephthalate, 3′-p-(aminophenyl)fluorescein, coumarin-3-carboxylic acid, and sodium benzoate) for their applicability to measure •OH induced by PM in a high-throughput cell-free system using fluorescence techniques, based on both our experiments and on an assessment of the physicochemical properties of the probes reported in the literature. Disodium terephthalate (TPT) was the most applicable molecular probe to measure •OH induced by PM, due to its high solubility, high stability of the corresponding fluorescent product (i.e., 2-hydroxyterephthalic acid), high yield compared with the other molecular probes, and stable fluorescence intensity in a wide range of pH environments. TPT was applied in a high-throughput format to measure PM (NIST 1648a)-induced •OH, in phosphate buffered saline. The formed fluorescent product was measured at designated time points up to 2 h. The fluorescent product of TPT had a detection limit of 17.59 nM. The soluble fraction of PM contributed approximately 76.9% of the •OH induced by total PM, and the soluble metal ions of PM contributed 57.4% of the overall •OH formation. This study provides a promising cost-effective high-throughput method to measure •OH induced by PM on a routine basis.

Dangerous levels of harmful chemicals in electronic cigarette (e-cigarette) aerosols were reported by several studies, but variability in e-cigarette design and use patterns, and a rapid development of new devices, such as JUUL, hamper efforts to develop standardized testing protocols and understand health risks associated with e-cigarette use. In this study, we investigated the relative importance of e-cigarette design, power output, liquid composition, puff topography on e-cigarette emissions of carbonyl compounds, carbon monoxide (CO), and nicotine. Four popular e-cigarette devices representing the most common e-cigarette types (e.g., cig-a-like, top-coil, ‘mod’, and ‘pod’) were tested. Under the tested vaping conditions, a top-coil device generated the highest amounts of formaldehyde and CO. A ‘pod’ type device (i.e., JUUL) emitted the highest amounts of nicotine, while generating the lowest levels of carbonyl and CO as compared to other tested e-cigarettes. Emissions increased nearly linearly with puff duration, while puff flow had a relatively small effect. Flavored e-liquids generated more carbonyls and CO than unflavored liquids. Carbonyl concentrations and CO in e-cigarette aerosols were found to be well correlated. While e-cigarettes emitted generally less CO and carbonyls than conventional cigarettes, daily carbonyl exposures from e-cigarette use could still exceed acute exposure limits, with the top-coil device potentially posing more harm than conventional cigarettes.

Direct emissions of nicotine and harmful chemicals from electronic cigarettes (e-cigarettes) have been intensively studied, but secondhand and thirdhand e-cigarette aerosol (THA) exposures in indoor environments are understudied. Indoor CO2, NO2, particulate matter (PM2.5), aldehydes, and airborne nicotine were measured in five vape-shops to assess secondhand exposures. Nicotine and tobacco-specific nitrosamines were measured on vape-shop surfaces and materials (glass, paper, clothing, rubber, and fur ball) placed in the vape-shops (14 days) to study thirdhand exposures. Airborne PM2.5, formaldehyde, acetaldehyde, and nicotine concentrations during shop opening hours were 21, 3.3, 4.0, and 3.8 times higher than the levels during shop closing hours, respectively. PM2.5 concentrations were correlated with the number of e-cigarette users present in vape-shops (ρ = 0.366-0.761, p < .001). Surface nicotine, 4-(N-methyl-N-nitrosamino)-4-(3-pyridyl)butanal (NNA), and 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) were also detected at levels of 223.6 ± 313.2 µg/m2, 4.78 ± 11.8 ng/m2, and 44.8 ± 102.3 ng/m2, respectively. Substantial amounts of nicotine (up to 2073 µg/m2) deposited on the materials placed within the vape-shops, and NNA (up to 474.4 ng/m2) and NNK (up to 184.0 ng/m2) were also formed on these materials. The deposited nicotine concentrations were strongly correlated with the median number of active vapers present in a vape-shop per hour (ρ = 0.894-0.949, p = .04-.051). NNK levels on the material surfaces were significantly associated with surface nicotine levels (ρ=0.645, p = .037). Indoor vaping leads to secondhand and THA exposures. Thirdhand exposures induced by e-cigarette vaping are comparable or higher than that induced by cigarette smoking. Long-term studies in various microenvironments are needed to improve our understanding of secondhand and THA exposures. This study adds new convincing evidence that e-cigarette vaping can cause secondhand and THA exposures. Our findings can inform Occupational Safety and Health Administration, state authorities, and other government agencies regarding indoor air policies related to e-cigarette use, particularly in vape-shops. There is an urgent need to ensure that vape-shops maintain suitable ventilation systems and cleaning practices to protect customers, employees, and bystanders. Our study also demonstrates that nicotine can deposit or be adsorbed on baby's clothes and toys, and that tobacco-specific nitrosamines can form and retain on baby's clothes, highlighting children's exposure to environmental e-cigarette aerosol and THA at home is of a particular concern.

Health impacts of electronic cigarette (e-cigarette) vaping are associated with the harmful chemicals emitted from e-cigarettes such as carbonyls. However, the levels of various carbonyl compounds under real-world vaping conditions have been understudied. This study evaluated the levels of carbonyl compounds (e.g., formaldehyde, acetaldehyde, glyoxal, and diacetyl, etc.) under various device settings (i.e., power output), vaping topographies, and e-liquid compositions (i.e., base liquid, flavor types). The results showed that e-vapor carbonyl levels were the highest under higher power outputs. The propylene glycol (PG)-based e-liquids generated higher formaldehyde and acetaldehyde than vegetable glycerin (VG)-based e-liquids. In addition, fruit flavored e-liquids (i.e., strawberry and dragon fruit) generated higher formaldehyde emissions than mint/menthol and creamy/sweet flavored e-liquids. While single-top coils formed 3.5-fold more formaldehyde per puff than conventional cigarette smoking, bottom coils generated 10–10,000 times less formaldehyde per puff. In general, increases in puff volume and longer puff durations generated significantly higher amounts of formaldehyde. While e-cigarettes emitted much lower levels of carbonyl compounds compared to conventional cigarettes, the presence of several toxic carbonyl compounds in e-cigarette vapor may still pose potential health risks for users without smoking history, including youth. Therefore, the public health administrations need to consider the vaping conditions which generated higher carbonyls, such as higher power output with PG e-liquid, when developing e-cigarette product standards.