Explore the vast range of titles available.

Colorful circularly polarized luminescence materials are desired for 3D displays, information security and asymmetric synthesis, in which single-emitted materials are ideal owing to self-absorption avoidance, evenly entire-visible-spectrum-covered photon emission and facile device fabrication. However, restricted by the synthesis of chiral broad-luminescent emitters, the realization and application of high-performing single-emitted full-color circularly polarized luminescence is in its infancy. Here, we disclose a single-emitted full-color circularly polarized luminescence system (spiral full-color emission generator), composed of whole-vis-spectrum emissive quantum dots and chiral liquid crystals. The system achieves a maximum luminescence dissymmetry factor of 0.8 and remains an order of 10 −1 in visible region by tuning its photonic bandgap. We then expand it to a series of desired customized-color circularly polarized luminescence, build chiral devices and further demonstrate the working scenario in the photoinduced enantioselective polymerization. This work contributes to the design and synthesis of efficient chiroptical materials, device fabrication and photoinduced asymmetric synthesis. Circularly polarised luminescence (CPL) is essential for asymmetric synthetic photochemistry. Here, the authors integrate white quantum dots with chiral nematic liquid crystal or liquid crystal polymer to achieve single-emitted tuneable full-colour or white CPL for enantioselective polymerization.

Oxygen vacancies (O v ) on metal oxide surfaces exhibit high catalytic activity for activating peroxymonosulfate (PMS) in wastewater decontamination, yet their in-situ regeneration remains a significant challenge. This study successfully achieves in-situ real-time regeneration of O v on CuO surfaces through simple alkali etching without interrupting the contaminant removal process. The surface hydroxyl groups introduced by alkali treatment significantly reduce the formation energy of O v on CuO surfaces from 1.60 eV to 0.38 eV. Both experimental results and density functional theory calculations reveal that the high activity of CuO relies on the synergy of surface hydroxyl groups and O v . This synergy increases the antibonding states below the Fermi level and the electron spin density of Cu near O v , thereby promoting electron transfer from CuO to PMS. As a result, by just adding an equimolar amount of alkali relative to PMS in CuO/PMS system, the degradation rate constant of sulfamethoxazole (SMX) greatly increases by 42 times. The primary reactive oxygen species in this system are sulfate radicals and hydroxyl radicals. Furthermore, OH - /CuO/PMS system exhibits a long-term stability (> 300 h) for SMX removal in a real water matrix. This work provides a highly executable method to in-situ real-time regenerate O v on CuO surfaces, representing significant progress in the critical yet underappreciated field of catalyst regeneration. This study demonstrates that simple alkali etching enables in-situ regeneration of oxygen vacancies on CuO, enhancing peroxymonosulfate activation for efficient pollutant degradation with a 42-fold increase and long-term stability.

The integration of an MFC-powered Fenton (MFC-Fenton) system into the traditional anaerobic composting process can promote excess dewatered sludge (ES) decomposition. However, the antibiotic resistance gene (ARG) profiles in ES treated by MFC-Fenton systems remain poorly understood; in addition, the effect of adding 2-bromoethane sulfonate (BES, a methane inhibitor) during ES treatment using an MFC-Fenton system on ARG levels is largely unexplored. The present work focused on investigating the effects of BES and bioelectrochemical processes on ARG and MGE abundances and unraveling the ARG attenuation mechanism. According to our findings, adding BES promoted ARG reduction in ES in an MFC-Fenton system. The average ARG levels in the MFC-Fenton samples containing high BES contents (0.4 or 0.5 g BES/g VSS) markedly declined relative to those in samples containing lower BES levels. Moreover, macrolide transporter ATP-binding protein, macrolide-efflux protein, and macB levels markedly decreased as BES levels increased. BES supplementation and bioelectrochemical assistance were crucial for altering the ARG composition in the MFC-Fenton system. Changes in the microbial community composition had the greatest effect on the variation in ARG composition. Furthermore, the Actinobacteria and Firmicutes levels accounted for 52.8% of the overall ARG variation. Among MGEs, plasmids, insertion sequences, and integrons showed lower levels within the sludge metagenomes. Typically, sulI, sulII, tetG, and bla TEM levels were positively correlated with metal resistance genes (MRGs), and their levels markedly declined following the MFC-Fenton process. Thus, the collective evidence indicates that BES synergizes with bioelectrogenesis to reduce ARG abundance.

As a new membrane technology, forward osmosis (FO) has aroused more and more interest in the field of wastewater treatment and recovery in recent years. Due to the driving force of osmotic pressure rather than hydraulic pressure, FO is considered as a low pollution process, thus saving costs and energy. In addition, due to the high rejection rate of FO membrane to various pollutants, it can obtain higher quality pure water. Recovering valuable resources from wastewater will transform wastewater management from a treatment focused to sustainability focused strategy, creating the need for new technology development. An innovative treatment concept which is based on cooperation between bioelectrochemical systems and forward osmosis has been introduced and studied in the past few years. Bioelectrochemical systems can provide draw solute, perform pre-treatment, or reduce reverse salt flux to help with FO operation; while FO can achieve water recovery, enhance current generation, and supply energy sources for the operation of bioelectrochemical systems. This paper reviews the past research, describes the principle, development history, as well as quantitative analysis, and discusses the prospects of OsMFC technology, focusing on the recovery of resources from wastewater, especially the research progress and existing problems of forward osmosis technology and microbial fuel cell coupling technology. Moreover, the future development trends of this technology were prospected, so as to promote the application of forward osmosis technology in sewage treatment and resource synchronous recovery

The forward osmosis membrane (FO membrane) is an emerging wastewater treatment technology in bioelectricity generation, organic substrate removal and wastewater reclamation. Compared with traditional membrane materials, the FO membrane has a more uniform water content distribution and internal solution concentration distribution. In the past, it was believed that one of the important factors restricting power generation was membrane fouling. This study innovatively constructed a mass transfer model of a fouling membrane. Through the analysis of the hydraulic resistance coefficient and the salt mass transfer resistance coefficient, the driving force and the tendency of reverse salt flux during membrane fouling were determined by the model. A surprising discovery was that the fouling membrane can also achieve efficient power generation. The results showed that the hydraulic resistance coefficient of the fouling membrane increased to 4.97 times the initial value, while the salt mass transfer resistance coefficient did not change significantly. Meanwhile, membrane fouling caused concentration polarization in the FO membrane, which enhanced the reverse trend of salt, and the enhancement effect was significantly higher than the impact of the water flux decline caused by membrane pollution. This will make an important contribution to research on FO membrane technology as sustainable membrane technology in wastewater treatment.

Osmotic microbial fuel cells (OsMFCs) are an emerging wastewater treatment technology in bioelectricity generation, organic substrate removal, and wastewater reclamation. To address this issue, proton-conductive sites were strengthened after using the forward osmosis (FO) membrane by reducing the membrane resistance. The mechanism of improving electricity generation was attributed mainly to the unique characteristics of the membrane material and the water flux characteristics of the FO membrane. In particular, only when the concentration of catholyte was greater than 0.3 M was the membrane resistance the main contributor to the overall internal resistance. Meanwhile, through the simulation of the concentration inside the membrane, the changes in the membrane thickness direction and the phase transition of the internal structure of the membrane from the dry state (0% water content) to the expansion state (>50%water content) were analyzed, which were influenced by the water flux, further explaining the important role of the membrane’s microenvironment in reducing the membrane impedance. This further opens a novel avenue for the use of OsMFCs in practical engineering applications.

Osmotic microbial fuel cells (OsMFCs) can integrate forward osmosis into microbial fuel cells (MFCs), which are able to perform organic elimination, bioenergy production, and high-class water abstraction from wastewater. However, it is not well understood how the unique feature of OsMFCs, i.e., water flux, helps improve current generation. Based on experimental studies and the Springer model theory, a new method for representing water transmission in OsMFC membranes is put forward that considers water transmission by electro-osmosis resulting from proton flux through the membrane and by osmosis resulting from osmotic pressure grades of water. In this research, osmotic water transmission is associated with the permeable differential pressure resulting from the ionic differential concentration in the membrane, and electro-osmotic water transmission is found to be proportional to the current density employed but irrelevant to the composition gradients. The net water transmission in OsMFC depends on the operation time and increases accordingly with higher current density and composition gradients. Furthermore, the membrane’s proton conductibility and water-transmission capabilities are significantly affected by the moisture content, which decreases from the negative electrode to the positive electrode in the OsMFC system. Increasing water flux with higher osmotic pressure and current density is therefore able to diminish the resistance of the membrane.

Background Gestational diabetes mellitus is a risk factor for congenital heart defects. The article aimed to investigate the expression and roles of MST1, YAP1, Last1/2 and Survivin in modulating HG-induced cardiomyocyte apoptosis and maternal diabetes-induced heart abnormality. Methods Diabetes mellitus was induced in rats using streptozotocin. The protein expression and phosphorylation analysis in fetal heart tissue was assessed by western blot and immunohistochemical staining. Hoechst 33342 staining assay was performed to explore H9C2 apoptosis. The gene and protein expression in H9C2 cells was assessed by quantitative PCR and western blot. Knockdown of gene expression was assessed by RNA interference. Results Our results revealed that increased MST1 protein levels in the heart tissues of the offspring of diabetic rats in vivo and in H9C2 cardiomyocytes under HG treatment in vitro, respectively. Knockdown and overexpression experiments showed that MST1 played a key role in mediating HG-induced apoptosis in cardiomyocytes. Downregulation of YAP1 was associated with HG-induced, MST1-mediated cardiomyocyte apoptosis. Further study showed that MST1 downregulated the protein level of YAP1 through mediation of YAP1 phosphorylation on Ser127 and Ser397; this process also required LATS1/2 participation. MST1 overexpression increased the phosphorylation levels of LATS1/2, which were also shown to be increased in the heart tissues of diabetic offspring. We also found that YAP1 mediated the expression of Survivin during HG-induced apoptosis, and the Survivin-inhibitor YM155 partially inhibited the role of YAP1 in suppressing apoptosis induced by HG in cardiomyocytes. Conclusion These findings reveal a regulatory mechanism of MST1/YAP1/Survivin signaling in modulating cardiomyocyte apoptosis in vitro and maternal diabetes-induced congenital heart defects in vivo.

To identify the influences of anthropogenic activities on the composition, spatial distribution, sources, and transformation mechanism of sedimentary fulvic acid (FA) fractions from different reaches of an urban river were tracked via excitation-emission matrix (EEM) fluorescence spectroscopy with parallel factor (PARAFAC) analysis and two-dimensional correlation spectroscopy (2D-COS). Sediment samples were collected from Baitapu River (BR) along gradients with human activities (e.g., rural, town, and urban sections) in Shenyang, northeast China, from which FA fractions were extracted and then determined via EEM fluorescence spectroscopy. According to optical indices, the autochthonous sources of sedimentary FA fractions in BR were more significant than the terrestrial sources. Among the sections, the contribution from autochthonous sources decreased in the following order: Rural > Urban > Town. Six components of sedimentary FA fractions were identified via EEM–PARAFAC: C1 comprised tryptophan-like (TRL) compounds; C2 was associated with microbial humic-like (MHL) compounds; C3, C4, and C5 were associated with FA-like (FAL) compounds; and C6 comprised humic acid-like (HAL) compounds. The proportion of sedimentary FA fractions decreased in the following order: MHL + FAL + HAL (humus, 77.37–88.90%) > TRL (protein, 11.10–22.63%) for the three sections, showing that humus dominated. The town section exhibited the highest sedimentary FA fractions (5328.87 ± 1315.82 Raman unit [R.U.]), followed by the urban (4146.49 ± 535.75 R.U.) and rural (2510.56 ± 611.00 R.U.) sections. Three pollution sources were determined via principal component analysis (i.e., the dominant industrial source, domestic wastewater, and agricultural effluent). Additionally, the results from 2D-COS revealed that sedimentary FA fractions tended to stabilize as the protein-like component was transformed into the HAL component. Furthermore, we used the structural equation model to validate the critical environmental variables affecting the FA fraction transformation. The results can elucidate the influences of human activities on the dynamics of sedimentary FA fractions in urban rivers.

Based on the concept of resource utilization, this study successfully prepared a green and highly efficient nitrogen-doped biochar catalyst (N-BC-800) using agricultural waste cotton hulls as a raw material. This catalyst was then applied to the ozone-catalyzed degradation of N,N-diethyl-meta-toluamide (DEET), a typical insect repellent in water bodies. The apparent second-order rate constant reached 2358 M −1  s −1 , representing a 106-fold increase compared to the O 3 system alone, and a 25-fold increase compared to the O 3 /BC system. Experimental characterization and theoretical analysis indicate that C=O groups and pyridinic N structures on the material surface serve as primary catalytic active sites. These synergistically promote ozone decomposition and generate highly reactive intermediates which are further converted into reactive oxygen species (ROS), significantly enhancing DEET degradation performance. This catalyst exhibits excellent stability and applicability in real aquatic environments. It demonstrates broad-spectrum degradation effects on multiple pollutants while significantly reducing the ecotoxicity of reaction byproducts. This study provides theoretical support and practical pathways for developing highly efficient, green ozone-catalyzed materials. Graphical Abstract Highlights Agricultural waste is transformed into a highly effective water purification catalyst. Catalyst boosts ozone treatment efficiency by over 100-fold for pollutants. Surface active sites convert ozone into stronger reactive oxygen species.