Explore the vast range of titles available.

The coherent interaction of electromagnetic fields with solid-state two-level systems can yield deterministic quantum light sources for photonic quantum technologies. To date, the performance of semiconductor single-photon sources based on three-level systems is limited mainly due to a lack of high photon indistinguishability. Here we tailor the cavity-enhanced spontaneous emission from a ladder-type three-level system in a single epitaxial quantum dot through stimulated emission. After populating the biexciton (XX) of the quantum dot through two-photon resonant excitation, we use another laser pulse to selectively depopulate the XX state into an exciton (X) state with a predefined polarization. The stimulated XX–X emission modifies the X decay dynamics and improves the characteristics of a polarized single-photon source, such as a source brightness of 0.030(2), a single-photon purity of 0.998(1) and an indistinguishability of 0.926(4). Our method can be readily applied to existing quantum dot single-photon sources and expands the capabilities of three-level systems for advanced quantum photonic functionalities. Deterministic single-photon sources are a key building block for photonic quantum technologies. Stimulated emission now helps tailoring spontaneous emission from a ladder-type three-level system in a single epitaxial quantum dot for bright polarized sources with a high photon purity and indistinguishability.

The emerging hybrid integrated quantum photonics combines the advantages of different functional components into a single chip to meet the stringent requirements for quantum information processing. Despite the tremendous progress in hybrid integrations of III-V quantum emitters with silicon-based photonic circuits and superconducting single-photon detectors, on-chip optical excitations of quantum emitters via miniaturized lasers towards single-photon sources (SPSs) with low power consumptions, small device footprints, and excellent coherence properties is highly desirable yet illusive. In this work, we present realizations of bright semiconductor SPSs heterogeneously integrated with on-chip electrically-injected microlasers. Different from previous one-by-one transfer printing technique implemented in hybrid quantum dot (QD) photonic devices, multiple deterministically coupled QD-circular Bragg Grating (CBG) SPSs were integrated with electrically-injected micropillar lasers at one time via a potentially scalable transfer printing process assisted by the wide-field photoluminescence (PL) imaging technique. Optically pumped by electrically-injected microlasers, pure single photons are generated with a high-brightness of a count rate of 3.8 M/s and an extraction efficiency of 25.44%. Such a high-brightness is due to the enhancement by the cavity mode of the CBG, which is confirmed by a Purcell factor of 2.5. Our work provides a powerful tool for advancing hybrid integrated quantum photonics in general and boosts the developments for realizing highly-compact, energy-efficient and coherent SPSs in particular.

GaSb-based single-transverse-mode narrow ridge waveguide (RW) lasers with high power and simultaneous good beam quality have broad application prospects in the mid-infrared wavelength region. Yet its design and formation have not been investigated systematically, while the beam characteristics that affect their suitability for specific applications remain rarely analyzed and optimized. The present work addresses these issues by theoretically establishing a waveguide parameter domain that generalizes the overall possible combinations of ridge widths and etch depths that support single-transverse-mode operation for GaSb-based RW lasers. These results are applied to develop two distinct and representative waveguide designs derived from two proposed major optimization routes of model gain expansion and index-guiding enhancement. The designs were evaluated experimentally based on prototype 1-mm cavity-length RW lasers in the 1950 nm wavelength range, which were fabricated with waveguides having perpendicular ridge and smooth side-walls realized through optimized dry etching conditions. The model gain expanded RW laser design with a relatively shallow-etched (i.e., 1.55 μm) and wide ridge (i.e., 7 μm) yielded the highest single-transverse-mode power to date of 258 mW with a narrow lateral divergence angle of 11.1∘ full width at half maximum at 800 mA under room-temperature continuous-wave operation, which offers promising prospects in pumping and coupling applications. Meanwhile, the index-guiding enhanced RW laser design with a relatively deeply etched (i.e., 2.05 μm) and narrow ridge (i.e., 4 μm) provided a highly stable and nearly astigmatism-free fundamental mode emission with an excellent beam quality of M2 factor around 1.5 over the entire operating current range, which is preferable for seeding external cavity applications and complex optical systems.

We proposed a precise calibration process of Al 0.9Ga0.1As/GaAs DBR micropillar cavity to match the single InAs/GaAs quantum dot (QD) exciton emission and achieve cavity mode resonance and a great enhancement of QD photoluminescence (PL) intensity. Light-matter interaction of single QD in DBR micropillar cavity (Q ∼ 3800) under weak coupling regime was investigated by temperature-tuned PL spectra; a pronounced enhancement (14.6-fold) of QD exciton emission was observed on resonance. The second-order autocorrelation measurement shows g(2)(0)=0.070, and the estimated net count rate before the first objective lens reaches 1.6×107 counts/s under continuous wave excitation, indicating highly pure single-photon emission at high count rates.

InAlAs:Be/InGaAs superlattices grown at low temperatures were investigated in this study. To obtain the highest resistivity and mobility simultaneously, a growth temperature above 200 °C was applied. The electrical properties were conducted via Hall effect measurement and a photoresponse test. The experimental results demonstrate that the sample grown at 257.5~260 °C exhibits the highest resistivity (1290 Ω × cm) and lowest carrier concentration (3.18 × 1014 cm−3), along with the highest mobility (187.2 cm2/Vs). Furthermore, the highest photoresponse (1.21) relative to dark resistivity was obtained under 1500 nm excitation. The optimized growth parameter of InGaAs/InAlAs multilayered structures is of great significance for fabricating high-performance terahertz photoconductive semiconductor antennas.

InAs/GaAs quantum dots (QDs) appear promising for optoelectronic applications. However, the inhomogeneous broadening caused by natural strain and the non-uniform size distribution deteriorates the device performance based on multi-stacked QD layers. In this study, In-flush was incorporated during the epitaxy, and the photoluminescence (PL) linewidth was significantly narrowed to 26.1 meV for the flushed sample and maintained to 27.3 meV for the unflushed sample. The flushed sample shows better device performance in threshold current (0.229 to 0.334 A at 15 °C), power (1.142 to 1.113 W at 15 °C), and characteristic temperature (51 to 39 K in the range of 55~80 °C) compared with the unflushed sample.

The doublesex / mab-3 related transcription factor ( Dmrt ) genes regulate sexual development in metazoans. Studies of the doublesex ( dsx ) gene in insects, in particular Drosophila melanogaster , reveal that alternative splicing of dsx generates sex-specific Dsx isoforms underlying sexual differentiation. Such a splicing-based mechanism underlying sex-specific Dmrt function is thought to be evolved from a transcription-based mechanism used in non-insect species, but how such transition occurs during evolution is not known. Here we identified a male-specific dsx transcript ( dsx M2 ) through intron retention (IR), in addition to previously identified dsx M and dsx F transcripts through alternative polyadenylation (APA) with mutually exclusive exons. We found that Dsx M2 had similarly masculinizing function as Dsx M . We also found that the IR-based mechanism generating sex-specific dsx transcripts was conserved from flies to cockroaches. Further analysis of these dsx transcripts suggested an evolutionary pathway from sexually monomorphic to sex-specific dsx via the sequential use of IR-based and APA-based alternative splicing. An ancestral male-specific doublesex isoform, dsxM2 , is identified via intron retention, with a masculinizing function weaker than the modern dsxM

Protein phosphorylation is crucial for a variety of biological functions, but how it is involved in sexual development and behavior is rarely known. In this study, we performed a screen of RNA interference targeting 177 protein kinases in Drosophila and identified 13 kinases involved in sexual development in one or both sexes. We further identified that PKA and CASK promote female sexual behavior while not affecting female differentiation. Knocking down PKA or CASK in about five pairs of pC1 neurons in the central brain affects the fine projection but not cell number of these pC1 neurons and reduces virgin female receptivity. We also found that PKA and CASK signaling is required acutely during adulthood to promote female sexual behavior. These results reveal candidate kinases required for sexual development and behaviors and provide insights into how kinases would regulate neuronal development and physiology to fine tune the robustness of sexual behaviors.

In this work, we measure polarization-resolved photoluminescence spectra from excitonic complexes in tens of single InAs/GaAs quantum dots (QDs) at the telecom O-band with strain-coupled bilayer structure. QDs often show fine-structure splitting (FSS) ~100 μeV in uniform anisotropy and valence-band mixing of heavy holes (HH) and light holes (LH); the biaxial strain also induces LH excitons with small FSS (especially XX, <5 μeV, 70% of QDs); delocalized LH reduces the Coulomb interaction between holes Vhh and enhances population on LH excitons XX, XX11, X11+ and XX21+.

We propose a novel graded AlGaAsSb layer growth method to achieve a super-linear interface by precisely controlling the cell temperature and valve position. Atomically smooth surface and lattice-matched epitaxy was confirmed by AFM and the HRXRD characterization of the graded AlGaAsSb layer sample. With the inserted graded layer between the cladding and waveguide layers, high-power, high-efficiency GaSb-based laser emitters and laser bars were confirmed. The linearly graded interface layer smooths the potential barrier peak between the cladding and waveguide layers, which resulted in a low turn-on voltage of 0.65 V and an ultra-low series resistance of 0.144 Ω. A maximum continuous-wave output power of 1.8 W was obtained with a high power conversion efficiency of 28% at 1.1 A and 12% at 8 A. A facet-coated laser bar was also fabricated with a record-high CW output power of 18 W. A high internal quantum efficiency of 83 was maintained at 40 °C, implying improved carrier injection efficiency, which benefits from the built-in electric field of the composition-graded AlGaAsSb layer.